Providing & Installation Furniture & Allied Work at Mamlatdar First Floor Building at Unjha, Dist: Mehsana.

It. No. Quantity Unit Rate In Figures In Words Amount

reference to book of specifications)

1 High back revolving & tilting executive chair(M39)

Providing and supplying High back chair with Metal frame work.

Upholstered with Artificial leather/Leatherette and molded PU foam,

together with molded seat & back covers. The back foam should be

designed with contoured lumber support for extra comfort. Caster of

high durability & hydraulic. The chair should have cylinder with

years warranty. The size of chair 53cm x 79cm (Back side) and 51cm x Rupees Seventeen

49cm (seat size). The PU foam should be molded with density =45 ± 2 Thousand Four

kg/m3. with One-piecearmrests. The armrests are scratch and weather 1.00 Nos. 17422.50

Hundred Twenty Two

resistant. The permanent contact mechanism is designed with 360° and Paise Fifty Only

revolving type, 12º seat tilt 19° back tilt, Front pivot for tilt with feet

resting on ground ensuring more comfort, Tilt tension adjustment,

position locking with anti-shock back mechanism, which should prevent

the backrest from impacting the user when the lock is released, static

seat depth adjustment=0.5 cm 5 position locking. As per Instruction of

EIC & User Department

2 Medium back revolving & tilting chair(M39)

Providing and supplying Medium back chair with Metal frame

work. Upholstered with changeable fabric upholstery covers (as

per requirement) and molded PU foam, together with molded seat &

back covers. The back foam should be designed with contoured lumber

support for extra comfort. Caster of high durability & hydraulic. The

chair should have cylinder with 5 years warranty. Rupees Twelve

The size of chair 47.5cm x 58cm (Back side) and 49cm x 48cm Thousand Seven

(seat size). The PU foam should be molded with density =45 ± 2 Hundred Seventy Six

kg/m3. With One-piece armrests. The armrests are scratch and and Paise Fifty Only

weather resistant. The permanent contact mechanism is designed with

360° revolving type, with pneumatic height adjustment & 17 °

maximum tilt only & tilt tension adjustment facility. As per Instruction

of EIC & User Department.

3 Low back revolving & tilting chair(M39)

Providing and supplying Law back chair for work center &

other staff the seat & back are made of Metal frame work.

Upholstered with changeable fabric upholstery covers (as per

requirement) and molded PU foam, together with molded seat &

back covers. The back foam should be designed with contoured

lumber support for extra comfort. Caster of high durability & Rupees Eight

hydraulic. The chair should have cylinder with 5 years warranty. Thousand One

The size of chair 45cm x 45cm (Back side) and 45cm x 43cm (seat Hundred Thirty and

size). The PU foam should be molded with density =45 ± 2 kg/m3 with Paise Fifty Only

One-piece armrests. The armrests are scratch and weather resistant.

The permanent contact mechanism is designed with 360° revolving

type, with pneumatic height adjustment & 17° maximum tilt only & tilt

tension adjustment facility.As per Instruction of EIC & User

Department

4 Visitor Chairs (M39)

Providing and supplying Visitor or Guest chair the seat &

back are made of 12mm thick hot-pressed plywood upholstered

with changeable fabric upholstery covers (as per requirement) and

molded PU foam, together with molded seat & back covers. The back

foam should be designed with contoured lumber support for extra Rupees Four Thousand

comfort. The size of chair 45cm x 38cm (Back side) and 45cm x 43cm 12.00 Nos. 4065.25 Sixty Five and Paise

(seat size). The PU foam should be molded with density =45 ± 2 kg/m3. Twenty Five Only

The armrests with Leg made with Powder coated MS structure as per

required necessary hardware. As per Instruction of EIC & User

Department

5 Stackable Chair

Standard company made chair, equivalent to Godrej,

Neelkamal, cello etc. The Stack Chair is a high impact polypropylene

seat and back featuring a contoured design with generous seat and back

for extra comfort. The tubular steel frame with black powder coat finish

is equipped with plastic glides for durability and mobility. The

lightweight chair stacks up to 15 chairs high.

*Contoured design with generous seat and back for extra Rupees Two Thousand

comfort 14.00 Nos. 2555.30 Five Hundred Fifty Five

*High impact polypropylene seat and back and Paise Thirty Only

*Tubular steel frame with black powder coat finish and plastic

*Light-weight chair,

*Stacks up to 15 chairs high

*Dimensions: 43cm Wide x 75cm High x 42 cm deep.As per Instruction

of EIC & User Department

6 Main Table with side unit

Providing and supplying Main Table made with 19mm Thk. Plywood

(M1) structure as per architect drawing finished with 1.0 mm Thk.

decorative laminate (M24) on outside portion &0.8 mm Thk. liner

Laminate inside as specified & approved by architect fixed with

necessary fixtures and fastening (Hardware) (M14) as per architect

drawing. Provide Plastic Computer Desk Table Grommet Cable Wire

Rupees Twenty Two

Outlet Hole Cover 60mm, Key-board trey, S.S. legs, Drawers with

Thousand Eight

telescopic roller channels (M15), Handle (M19) and locking (M16) 2.70 Sqmt 22890.64

arrangements with all necessary fixtures and fastening (M14). Pro vide Hundred Ninety and

Shutters as per drawing fixed with handle (M19), hinges (M18), Paise Sixty Four Only

magnet (M14), complete with bidding patties and all required hardware

(M14).Provide footrest as per drawing. All exposed edges shall be

covered with required Teak wood beading Patti (M4) finished with

approved melamine polishing (M29) work. Complete as per architect's

drawing and as per instruction of architect & engineer in charge. (Refer

7 Table – Admin

Providing and supplying Table made with 19mm Thk. Plywood(M1)

structure as per architect drawing finished with 1.0 mm Thk. decorative

laminate(M24) on outside portion &0.8 mm Thk. liner Laminate inside

as specified & approved by architect fixed with necessary fixtures and

fastening (Hardware) (M14) as per architect drawing. Provide Plastic

Computer Desk Table Grommet Cable Wire Outlet Hole Cover 60mm,

Key-board trey, Soft-board, S.S.legs, Drawers with telescopic roller Rupees Forty Six

channels (M15), Handle (M19) and locking (M16) arrangements with Thousand Five

all necessary fixtures and fastening (M14). Provide Shutters as per Hundred Eighty and

drawing fixed with handle (M19), hinges (M18), magnet (M14), Paise Nineteen Only

complete with bidding patties and all required hardware (M14).

Provide footrest as per drawing.All exposed edges shall be covered with

required Teak wood beading Patti (M4) finished with approved

melamine polishing (M29) work. Complete as per architect's drawing

and as per instruction of architect & engineer in charge. (Refer

8 Table - Staff

Providing and supplying Table made with 19mm Thk. Plywood(M1)

structure as per architect drawing finished with

mm Thk. decorative laminate(M24) on outside portion &0.8 mm

Thk. liner Laminate inside as specified & approved by architect

with fixed with necessary fixtures and fastening (Hardware) (M14) as

per architect drawing. Provide Plastic Computer Desk Table Grommet Rupees Fifteen

Cable Wire Outlet Hole Cover 60mm, Key-board trey, S.S. legs, Thousand Five

Drawers with telescopic roller channels (M15), Handle (M19) and 2.00 Smt 15588.34 Hundred Eighty Eight

locking (M16) arrangements with all necessary fixtures and fastening and Paise Thirty Four

(M14). Provide Shutters as per drawing fixed with handle (M19), Only

hinges (M18), magnet (M14), complete with bidding patties and all

required hardware (M14).Provide footrest as per drawing. All exposed

edges shall be covered with required Teak wood beading Patti (M4)

finished with approved melamine polishing (M29) work. Complete as

per architect's drawing and as per instruction of architect & engineer in

charge. (Refer drawing)

9 Three seated sofas

Providing and supplying sofa. (3 seated) made with

using 19mm Thk. Plywood (M1) structure frame with S.S. legs

required necessary support fixed with necessary fixtures and

fastening (Hardware)(M14). It shall be covered with 32 Density

PU foam(M22) with required Thickness as per design in seat & Rupees Twenty Nine

back and handle portion this should be again covered with 14 1.00 Nos. 29037.50 Thousand Thirty Seven

mm thick PU foam(M22) with Madarpat cover on it & and Paise Fifty Only

upholstered fabric(M26) or leather of suggested & approved by

architect finished with seat, back & all visible side as per

architect drawing. Complete as per architect's drawing and as

per instruction of architect & engineer in charge. (Refer Drawings)

10 Two seated sofas Providing

and supplying sofa(2seater) made with using 19mm Thk. Plywood (M1)

structure frame with S.S. legs required necessary support fixed with

necessary fixtures and fastening (Hardware)(M14). It shall be covered

with 32 Density PU foam(M22) with required Thickness as per design Rupees Twenty

in seat & back and handle portion this should be again covered with 14 4.00 Nos. 20907.00 Thousand Nine

mm thick PU foam (M22) with Madarpat cover on it & upholstered

Hundred Seven Only

fabric(M26) or leather of suggested & approved by architect finished

with seat, back & all visible side as per architect drawing.Complete as

per architect's drawing and as per instruction ofarchitect & engineer in

charge. (Refer drawing)

11 Centre Table

Providing and supplying Centre Table with Glass top made with 19mm

Thk. Plywood (M1) finished with 1.0 mm Thk. decorative laminate

sheet (M24) specified and approved by architect & fixed with necessary Rupees Six Thousand

fixtures and fastening (Hardware) (M14) inclusive of approved Four Hundred

melamine polishing (M29) work. Top part of center Table covered with Seventeen and Paise

12 mm Thk. toughened Glass (M27) with Polished Edges. Complete as Fifty Four Only

per architect's drawing and as per instruction of architect & engineer in

charge. (Refer drawing)

12 Corner Table/Tipoi

Providing and supplying Corner Table/Tipoi with Glass top made with

19mm Thk. Plywood (M1) finished with 1.0 mm Thk. decorative

laminate sheet (M24) specified and approved by architect & fixed with Rupees Seven

necessary fixtures and fastening (Hardware) (M14) inclusive of Thousand One

approved melamine polishing (M29) work. Top part of center Table 1.00 Smt 7177.06 Hundred Seventy

covered with 12 mm Thk. toughened Glass (M27) with Polished Edges. Seven and Paise Six

Complete as per architect's drawing and as per instruction of architect Only

& engineer in charge. (Refer drawing)

13 Wooden cup boards/ side table

Providing and supplying Full height Storage unit made with using

19mm Thk. Plywood (M1) structure and finished with 1.0 mm Thk.

decorative laminate(M24) sheet on outside & and 0.8 mm Thk. liner

laminate(M25) on inside as specified / approved by architect with fixed

with necessary fixtures and fastening (Hardware) (M14), as per

architect drawing. The similar Ply + laminate made shutter shall be Rupees Five Thousand

fixed with required handle (M19), hinges (M18)., magnet (M18) & 28.00 Smt 5870.12 Eight Hundred Seventy

Locks (M16) complete with bidding patties (M4) and all required and Paise Twelve Only

hardware (M14).Ply shelves removable Type supported on side teak

wood (M5) battens on both sides. All exposed edges shall be covered

with 8mm Thk. Teak wood beading Patti (M4) finished with melamine

polish (M29). Complete or as directed as per architect drawing and as

per instruction of architect & engineer in charge.

14 Wooden cup boards/ side table

Providing and supplying Low Height Storage unit made with using

19mm Thk. Plywood (M1) structure and finished with 1.0 mm Thk.

decorative laminate(M24) sheet on outside & and 0.8 mm Thk. liner

laminate(M25) on inside as specified / approved by architect with fixed

with necessary fixtures and fastening (Hardware) (M14), as per

architect drawing. The similar Ply + laminate made shutter shall be Rupees Eight

fixed with required handle (M19), hinges (M18)., magnet (M18) & Thousand One

Locks (M16) complete with bidding patties (M4) and all required Hundred Fifty Six and

hardware (M14).Ply shelves removable Type supported on side teak Paise Seventy Six Only

wood (M5) battens on both sides. All exposed edges shall be covered

with 8mm Thk. Teak wood beading Patti (M4) finished with melamine

polish (M29). Complete or as directed as per architect drawing and as

per instruction of architect & engineer in charge.

15 Conference Table with Mic. (Modular design)

Providing, Modular Conference table as per layout - 600 mm

wide:made from two layers of Flat Laminated Plywood Panels of 19mm

TH Plywood (M1) structure finished 1.5 mm TH decorative

laminate(M24) sheet approved by architect with fixed with necessary

fixtures and fastening (Hardware) (M14) as per architect drawing. Top

portion of conference table all edges shall be covered with required half Rupees Fourteen

round Teak wood beading Patti (M4) finished with approved melamine Thousand Six Hundred

polishing (M29) work. The table shall also provision for carrying wires One and Paise Fifty

& mounting electrical plug point, switches & mic etc. Complete or as Seven Only

directed as per architect drawing and as per instruction of architect &

engineer in charge.Table Size:120 x 60 x 75 cm (each module, total

modules as in Drawing) & 2 modules of require radius quarter circles,

as shown in drawing.

16 Writing Board

Providing, Supplying & fixing white board having size 180 x 120 cm

including Aluminum frame, including using 5mm thick

Rupees Four Thousand

Armstrong single piece magnetic white board, including using 12mm

4.00 Nos. 4065.25 Sixty Five and Paise

plywood sheets as supporting on walls, boxing to conceal

Twenty Five Only

columns/beams as per plan, including fixing on wall with all materials

& labour etc. complete as per instruction of architect & engineer in

17 Projection Screen Rupees Twenty Six

Providing and fixing Projector screen 244 x 300 cm including Tripot as Thousand One

directed by engineer in charge with necessary tools & Plants. As per 1.00 Nos. 26133.75 Hundred Thirty Three

Instruction of EIC & User Department. and Paise Seventy Five

18 Metal rack

Providing and supplying metal rack made with slotted M.S

angle racks with adjustable made with high grade steel IS 5986 for

Upright and IS 513D. All the components shall be thoroughly pretreated Rupees Two Thousand

in stage pre treatment process and all the components shall be painted

3.00 Nos. 2323.00 Three Hundred Twenty

with epoxy powder coating and film thickness of minimum50

Three Only

microns.Color: Grey color for beam and base plate rest all components

should be in dark Grey color.

Size :- 152 cm x 45 cm x 182 cm

19 Notice Board

Portable Loop Fabric Panel Floor Display Stand

* Panel Dimensions: 120cm Wide x 168cm High

* Overall Display Height: 203cm Rupees Two Thousand

* Panel Display Frame Finishes: Light Gray or Beige Six Hundred Ninety

* Loop Fabric Colors Available: (Blue) Four and Paise Sixty

* Casters (Wheels) are included for easy portability Eight Only

* Set up quickly and easily Includes stable, snap-lock feet,

for alternative to casters.As per Instruction of EIC & User Department

20 Solid partition full or low height

Providing & fixing 100 mm thk dry wall partition made out Rupees Three

of 75mm-C-Studs - 0.6 mm thick, max. Spacing 625 mm for

Thousand One

framing work.12.5 mm gypsum sheet (Fire rating-up to 1 hour) on

20.64 SQMT 3184.53 Hundred Eighty Four

both side of framing work fixed with necessary fixtures and

and Paise Fifty Three

fastening (Hardware)(M14) finished with necessary wall paint.

As per Instruction of EIC & User Department

21 Mirror panel Size- as per requirement

Providing and fixing bevelled edge Mirror with led light of superior

Rupees Five Thousand

glass mounted 8mm thick MR grade plywood sheet and fixed to

3.80 SQMT 5807.50 Eight Hundred Seven

wooden plugs with C.P. brass screws and washers etc. As per

and Paise Fifty Only

Instruction of EIC & User Department

22 Acoustic Treatment Acoustical ceiling - Perforated

Magnesium plaster finish tiles in 2ftx2ft grid 8mm in thickness with

necessary fixers and fitting with proper insulation in inner surface.NRC

Rupees Two Thousand

value -0.8 Insulation –Glasswool/ Rockwool/ synth polyfibre of 50mm

109.15 SQMT 2090.70 Ninety and Paise

thickness at inner side of ceiling As per Instruction of EIC & User

Seventy Only

Department.

23 Providing and fixing in position collapsible steel shutters with vertical

channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm

size with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, Rupees Six Thousand

steel pulleys complete with bolts, nuts, locking arrangements, stoppers 4.40 QUINT. 6110.51 One Hundred Ten and

handles including applying a priming coat of red lead paint. Paise Fifty One Only

24 Providing and fixing in position mosquito net complete with bolts, nuts, Rupees Nine Hundred

locking arrangements including all necessary required fixture. 82.62 SQMT 952.43 Fifty Two and Paise

(MARKET RATE) Forty Three Only

25 Providing and fixing Safety grills of required pattern to wooden frames

Rupees One Hundred

etc. with M.S. flats at required spacings and frame alround, square or

247.75 Kg 106.29 Six and Paise Twenty

round bars with round headed bolts and nuts or by screws (A) Plain

26 Supplying and installing of Dry Chemical Powder type 5 Kg. capacity Rupees One Thousand

fire extinguisher as per IS 2171 ISI mark with necessary fitting etc. Five Hundred Sixty

complete.. Market Rate Five and Paise Fifty

27 Providing carbon dioxide type fire extinguisher 4.50 Kg. capacity with Rupees Four Thousand

IS mark and test certificates of explosive department of Nagpur Market Eight Hundred Ninety

Rate Eight and Paise Fifty

28 Supplying, installing, testing and commissioning of yard hydrant

comprising of the following,Single headed hydrant valve as per IS 5290, Rupees Ten Thousand

made of Stainless Steel(SS 304) with 63 mm dia instantaneous out & 2.00 Nos 10049.50 Forty Nine and Paise

80 mm dia fanged inelt inlet,Blank cap , chain and hand wheel etc Fifty Only

complete. Market Rate

29 2 lengths of 15 Mtr long, 63mm dia RRL hose as per IS:636 Type B

Rupees Thirteen

with instataneuos couplings and Hoses shall be stored in side the hose

2.00 Nos 13635.00 Thousand Six Hundred

Thirty Five Only

Market Rate

30 no. SS-304 short branch pipe with nozzle Rupees Three

Market Rate Thousand Three

Hundred Eighty Three

and Paise Fifty Only

31 MS Outdoor Type Hose cabinet stand mounted type fabricated out of

MS sheet of 16 swg. with glass fronted ( 4mm thick glass with rubber Rupees Four Thousand

beeding) door and size of the cabinet shall be 600mm x 750 mm x 250 Four Hundred Ninety

mm Quoted rate shall be includes suitable stand for mounting, all Four and Paise Fifty

fasteners etc, and cabinet shall be powder coated of approved colour Only

both inside and out side

32 Supply, Installation, Testing & commissiooning of Mild Steel black

pipes, ERW, Heavy grade conforming to IS:1239 up to 150 mm dia. and

IS:3589 for pipes above 150 mm dia. complete with fittings, reducers,

tees, high tech supports, structural clamps such as rods, channels,

angles, nuts, bolts & washers, as required to be firmly mounted on the

MS steel structural members.10 % of all the welded joints shall be

done rediographically tested and 50% of the joints radiographed shall

be the "Field Joints" & hydrostatic testing for 2 hours at 150% of the Rupees Two Thousand

system pressure, hook-up etc. Painting for piping, fittings, hanger Three Hundred Seventy

support with U clamp, U bolt, threaded rods, nut, bots & washers & 20.00 Rmt 2373.50

Three and Paise Fifty

structural pipe support shall be one coat of zinc primer and two coats of Only

fire red enamel paint Shade No.536 of IS 5: 1994 complete with all

accessories as per approved drawings, specification and direction of the

Engineer-in-Charge.Rate shall include supply and fixing of all MS

80mm nominal dia

Market Rate

33 Providing erecting and fixing double coated PVC. (ISI) mark water tank

of reqd capacity each with all necessary fittings & connection etc. comp Rupees Three and

on terrace. Paise Ninety Four Only

{SOR P. No. 133 It. Code. 22014}

34 Supply, installation, testing & commissioning of horizontal mono

submersible pump set (Drain pump) as per IS: 14220 / 1994 & its latest

amendments of following duty parameters with suitable submersible Rupees Twenty

motor as per IS: 9283 / 1994 & its latest amendments working on

Thousand Four

phase, 415 V ± 10%, 50 ± 3% Hz power supply, rated speed 2900 RPM 1.00 Nos 20422.20

Hundred Twenty Two

of following duty capacity. Material of Constructions: Impeller: High

and Paise Twenty Only

tensile brass / LTB II; Casing: CI FG 260; Pump & Motor shaft: SS 304;

Bearing Bush: LTB III

ELE SOR 2022-23- Section -E, Sr.No.9(4), Page No.37

35 BOLL VALVE SIZE I

Rupees Two Thousand

Twenty Only

36 TWO WAY INLET Rupees Nine Thousand

Four Hundred Forty

Three and Paise Fifty

37 PRESSURE GAUGE BUTTON Rupees One Thousand

Nine Hundred Sixty

Nine and Paise Fifty

38 BUTTER FLY VALVE 80 NB Rupees Twelve

1.00 NOS 12120.00 Thousand One

Hundred Twenty Only

39 CHECK VALVE WAFER TYPE 80 NB Rupees Twelve

1.00 NOS 12120.00 Thousand One

Hundred Twenty Only

40 MONOBLOCK PUMP Rupees Seventy One

1.00 NOS 71205.00 Thousand Two

Hundred Five Only

41 FIRE ALARM PANEL 2 ZONE Rupees Eighteen

1.00 NOS 18180.00 Thousand One

Hundred Eighty Only

42 MANUAL PUSH BUTTON Rupees Six Thousand

1.00 NOS 6666.00 Six Hundred Sixty Six

43 MANUAL CALL POINT

Rupees Two Thousand

Twenty Only

44 HOOTER Rupees One Thousand

Nine Hundred Sixty

Nine and Paise Fifty

45 MANUAL ABORT SWITCH Rupees One Thousand

One Hundred Seventy

and Paise Fifty Nine

46 CABLE 2C (0.5 SQ ) MM Rupees Two Hundred

100.00 MTR 272.70 Seventy Two and Paise

Seventy Only

47 DOCUMENTS CHARGES & Consultancy Charge For getting NOC Rupees Fifteen and

from Authority Paise Fifteen Only

48 Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. Rupees Two Thousand

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone Nine Hundred Thirty

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm Two and Paise Ninety

thick with cement mortar 1:3 finished smooth with a floating coat of Three Only

neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line.

[SOR Chap.-24 It. Code:-24016AA]

49 Providing, laying and jointing in true line and level 110 mm dia.

U.P.V.C SWR (Type B) pipe conforming to IS 13592-1992 with one

end plain and other end socketed with rubber ring & fittings conforming

to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be Rupees Eight Hundred

fixed on wall using of PVC clamp of the size 110mm dia x 149mm 62.00 Rmt. 876.11 Seventy Six and Paise

length x 145mm height at every 2000mm center to center or shall be

Eleven Only

concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

[SOR Chap.-23 It. Code:-23067]

50 Providing, laying and jointing in true line and level 160 mm dia.

U.P.V.C SWR (Type B) pipe conforming to IS 13592-1992 with one

end plain and other end socketed with rubber ring & fittings conforming

to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be Rupees Eight Hundred

fixed on wall using of PVC clamp of the size 110mm dia x 149mm

100.00 Rmt. 834.38 Thirty Four and Paise

length x 145mm height at every 2000mm center to center or shall be

Thirty Eight Only

concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

[SOR Chap.-23 It. Code:-23066]

51 Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. Rupees Nine Thousand

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone Seven Hundred Eighty

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm Five and Paise

thick with cement mortar 1:3 finished smooth with a floating coat of Nineteen Only

neat cement on walls and bed concrete etc. complete.(iii) Inside

dimensions 600mm x 850 mm and 1250mm deep for pipe lines with

three or more inlets.

[SOR Chap.-24 It. Code:- 24016CA + 24017C * 8 ]

52 Providing & Constructing percolation sockwell of 2.54 mt internal clear

diameter and 5.00 mt depth including honey comb brick masonary in Rupees Sixty Three

C.M. 1:6, R.C.C. top slab of 10 cm thick filling with gravel etc. Thousand Nine

complete incl. all labour, material, excavation etc. complete Hundred Thirty Eight

(Rate Analysis) and Paise Five Only

Total Bid Price (in Figure)

Rupees Twenty Five Lakhs Eight Thousand Three Hundred Ten and Paise

(in words)

Thirty Three Only

I/We am/are willing to carry out the work at…% above/below percent(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below % Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

Signature of contractor

Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division

Mehsana Mehsana