REPAIR REPLACEMENT OF DADO FLOOR OF TOILETS AND SANITARY FITTINGS OF CERTAIN BLDGS INCLUDING MISC CONNECTED ITEMS AT AFS BIDAR.

Amount

Demolition of brickwork or stone/ PCC block masonry, built in cement mortar or cement lime mortar complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc, all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick (unreinforced) (below or above ground level) all as specified and as directed.

Demolition of concrete (unreinforced) of any description and in sunken portion or any position not otherwise specifically provided for all as specified and as directed.

Providing Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed.

Removal of concrete and plaster debris to a distance exceeding 1.5KM but not exceeding 5.00KM and depositing where directed complete all as directed.

Supply only liquid water proofing compound @ 100ml per bag of cement all as specified and directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified and directed.

Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm all as specified and directed.

18- 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

Taking down, easing and adjusting shutters of any description exc 1 sqm but n. exc 2.00 sqm each and refixing in same opening, and also refixing builders hardware as required including renewal of unserviceable screws complete all as specified and directed.

Supply and fix in repairs brass chromium plated tubular towel rail, first quality, 20mm dia D type 60cm long between flanges all as specified and directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platforms and other similar locations.

Coloured Non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing all as specified and directed.

Glazed ceramic tiles in vertical surfaces of size 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and directed.

Glazed ceramic tiles in vertical surfaces of size 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and directed.

10mm thick light shade Virified tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, etc complete all as specified and directed.

10mm thick light shade Virified tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm on vertical surfaces such as skirting, dados and risers to steps etc. complete all as specified and as directed.

PCC 40mm thick 1:2:4 type B1 using 20 mm graded stone aggregate as in flooring, finished even and smooth without using extra cement complete all as specified and directed.

25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in sub base/levelling course in floors etc complete, all as specified and directed.

Coloured Non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing all as specified and directed.

Coloured glazed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surfaces such as skirting, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Machine cut kota stone slab 10-12 mm thick in riser of steps, skirting, dado etc., laid over cement screed jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

20 - 25mm thick machine cut cudappah stone slab work (table rubbed and polished) in steps, jambs, pillar, window cills, cooking platforms, , and like laid over cement mortar screed and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing all as specified and directed.

Rendering 15 mm thick in CM (1:3) on fair faces of brick or concrete surfaces using liquid water proofing compound @100ml per bag of cement finished the surfaces even and fair without using extra cement complete all as specified and directed. Note: Water proofing compound will be measured and paid separately as supply only.

Rendering 15 mm thick plaster on wall surfaces in CM (1:4) finishing the surface even and smooth without using extra cement all as specified and directed .

Rendering 10 mm thick in CM (1:4) on brick/ concrete wall surfaces finishing the surface even and fair all as specified and directed.

Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes all as specified and directed.

Screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying three coats of white wash, all as specified and as directed.

15mm dia bore GI tubes medium grade with all fittings and fixed complete to walls all as specified and directed.

20mm dia bore GI tubes medium grade with all fittings and fixed complete to walls all as specified and directed.

25mm dia bore GI tubes medium grade with all fittings and fixed complete to walls all as specified and directed.

Taking down steel tubing 15mm bore and connections, all as specified and directed.

Taking down steel tubing 20mm bore and connections, all as specified and directed.

Taking down steel tubing 25mm bore and connections, all as specified and directed.

Supply and fix in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fix in repairs 15mm bore pillar taps, bearing ISI mark, cast copper alloy fancy type with capstan heads, chromium plated screw down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as specified and directed.

Grating doom 125mm dia of PTMT (Minimum weight 40gms) all as specified and directed.

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, first quality, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, etc complete including PCC filling with PCC 1:5:10, type E2, making good to floor to match with the existing, etc complete all as specified and directed.

Supply and fix in repairs Vitreous China wash down water closet pan (European pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and trap, including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc all as specified and directed.

Fixing only in repairs the old Sink kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each all as specified and directed.

Fixing only in repairs the old pillar taps fancy type all as specified and directed.

Fixing only in repairs the old bib taps fancy type all as specified and directed.

Supply and fix in repairs 15mm bore stop/Angle valves, bearing ISI mark, cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

Supply and fix in repairs 15mm bore stop valves, bearing ISI mark, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwd down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 600mm long all as specified and directed.

Supply and fix in repairs 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floors including clamps all as specified and directed.

Supply and fix in repairs 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floors including clamps all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) bends with access door any radius all as specified and directed.

S & F in repairs 75mm bore PVC (SWR) bends with access door any radius all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door all as specified and directed.

Supply and fix in repairs 75 mm bore, PVC (SWR) vent cowl all as specified and directed.

Supply and fix in repairs 110 mm bore, PVC (SWR) vent cowl all as specified and directed.

S & F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

Supply and fix in repairs PVC (SWR) multi floor trap with grating including jointing with solvent cement, dia of outlet 75 mm all as specified and directed.

Supply and fix in repairs PVC Low level Flushing cistern of 10 litres capacity, conforming to IS, white, with inlet, ball valve, float and handle including brackets and flush pipe all as specified and directed.

Supply and fix in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed.

Fixing only in repairs the old High or low level fluslhing cistern and flushing pipe all as specified and directed.

Fixing only in repairs the old Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand and including fixing of old supply and waste pipe all as specified and directed.

Supply and fix in repairs vitreous china wash basin , white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand and waste pipe all as specified and directed.

Supply and fix in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore all as specified and directed.

Supply and fix in repairs wall mixer with 'L' bend provision of OH shower of brass chromium plated, glossy finish for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed.

Supply and fix in repairs Toilet paper Holder of Brass, Glossy finish all as specified and directed.

Supply and fix in repairs Health Faucet with 1.5 m tube & hook of CP brass, glossy finish all as specified and directed.

Supply and fix in repairs 15mm bore chromium plated cast copper alloy bib taps two in one fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all as specified and directed.

S & F in repairs High density polythelene pipes (HDPE) of pressure rating 6kgf/cm² for waste pipe, 32 mm dia, including socket with threaded suitable for Kitchen sink/ wash hand basin, all as specified and as directed

Supply and fix in repairs Soap dish, brass chromium plated of suitable size, first quality, and fixed to plugs with chromium plated brass screws all as specified and directed.

Supply & fix in repairs stainless steel Jet spray 'L' type / multi / straight type including steel flexible connection pipe of suitable length for fixing to EWC all as specified and directed.

Siddique constructions

AMAR CONSTRUCTION