Construction of Veterinary dispensary building at Dhar in Tehsil Sarkaghat Distt. Mandi (HP)

Amount

Excavation in earth work in foundation and trenches in all kinds and classification of soils viz, pick work, pick jumper work, jumper work, blasting work and hard blasting work saturated soils including chiselling or any other mixed variety of soils, dewatering and / or removal of slush and other incidentals, lift upto any depth stacking the excavated soil upto any leads and lifts clear from the edge of excavation and then returning the stacked soil in any thickness of layers when required into plinths, sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as specified dumping place as per the direction of Engineer-In Charge.

Providing form work with steel plates 3.15mm (Three decimal fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete work including carriage of material within all leads and lifts and other incidential.

In flat surfaces such as soffits of suspended floors,roofs,landing and the like floor upto any thickness in all floor level

Sides and soffits of beams, haunchings, cantilever, girder, bressumers and lintels upto all heights in all floor level

Vertical surfaces such as walls and thickness partitions and the like including attached pillasters, buttresses, plinth and string courses and the like.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (One cement: six sand: twelve graded crushed stone aggregate 40mm (forty millimetre) nominal size) and curing complete but excluding cost of from work in foundation and plinth including carriage of materials within all leads and lifts and other incidentals.

Providing and laying cement concrete 1:1.5.:3 (One cement :one point five sand :three graded stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspened floors, roofs, landings, shelves and there support balconies, beams, girders, bressumers and cantilevers upto all floor level including carriage of materials with in all leads and lifts and other incidentals.

Providing and laying cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate) 20mm (Twenty milimetre) nominal size crushed stone aggregate mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work including carriage of materials with in all leads and lifts and other incidentals.

Suspened floors, roofs, landings, shelves and there support balconies, beams, girders, bressumers and cantilevers upto all floor level

Wall any thickness but not less than 0.10 ( zero point ten ) metre thickness including attached pilasters, buttress, plinth nad string courses etc. from top and foundation upto all floor level

Providing tor steel reinforcement for RCC work including bending binding and placing in position complete in all heights including cost of binding wire and entire carriage of material within all leads and lifts and other incidentials.

Second class brick work using common burnt clay building bricks in super structure in cement mortar 1:6 (one cement : six sand) in foundation and plinth including entire carriage of material within all leads and lifts and other incidentals.

Second class brick work using common burnt clay building bricks in super structure in cement mortar 1:6 (one cement : six sand) upto all floor level including entire carriage of material within all leads and lifts and other incidentals.

Squared rubble masonry coursed with hard stones at approved quality in foundation and plinth including raking out joints in cement mortar 1:6 ( one cement :six sand) including carriage of materials within all leads and lifts and upto all floor levels and other incidentals.

Stone filling dry hand packed under floor including carriage of materials within all leads and lifts and other incidentials charges.

Providing wood work in frames of doors windowes clerestory window and other frames wrought framed and fixed in position 2nd class deodar wood including curing complete and carriage of materials within all leads and lifts and other incidentals .

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory window including black enamelled iron butt hinges with necessary screws.40mm ( Forty milimetres) thick 2nd class deodar wood including curing complete and carriage of materials within all leads and lifts and other incidentals .

Providing and fixing 40mm (forty milimetres ) thick 2nd class ( Second class ) deodar wood wire guage shutters using galvenised M.S wire guage I.S guage designation 85G with wire of dia 0.56mm ( zero point fifty six milimetres ) for doors windows and clerestory window including bright finished black enamelled iron hinges with necessary screws including carriage of materials within all leads and lifts and other incidentials charges.

Providing and fixing Mild steel plain grills of required pattern in wooden/steel frames of window etc, with M.S. flats square or round bars with round headed bolts and nuts or by including carriage of materials within all leads and lifts and other incidentals charges.

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc complete including carriage of material within all leads and lifts and other incidentials. 300x16mm ( three hundred into sixteen millimetre) size.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc complete including carriage of material within all leads and lifts and other incidentals. 300x10mm (three hundred into ten millimetre) size.

Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete including carriage of material within all leads and lifts and other incidentals.

125mm (one hundred twenty five millimetre) size.

75mm (seventy five millimetre) size.

Providing and fixing 100mm (one hundred millimetre) size bright finished brass flat door stopper with rubber cushion with necessary screws including entire carriage of material within all leads, lifts and other incidentals.

Providing and fixing 150mm (one hundred fifty millimetre) size bright finished and black enameled iron helical door spring with necessary screws including entire carriage of material within all leads, lifts and other incidentals.

40mm (forty millimeter) thick cement concrete flooring 1:2:4 (one cement : two sand : four graded/crushed stone aggregate 20mm (twenty millimeter) nominal size) laid in one layer finished with a floating coat of neat cement and curing complete including carriage of materials within all leads and lifts and other incidentials charges.

Providing and laying 15mm (fifteen millimetre) thick cement plaster skirting with cement mortar 1:3 ( one cement:three sand) finished with a floating coat of neat cement in all heights including rounding of junction with floor including carriage of material within all leads, lifts and other incidentals.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting ready mixed paint brushing wood primer pink including carriage of materials within all leads and lifts and other incidentials charges.

Painting two coats (excluding priming coat) on new wood and wood based surfaces, with ready mixed paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping with ready mixed paint other than white including carriage of materials within all leads and lifts and other incidentials charges.

6mm (six millimeter) cement plaster to ceiling with cement mortar 1:4 (one cement : three sand) including carriage of materials within all leads and lifts and other incidentials charges.

15mm (fifteen millimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering up to all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) upto any floor level including carriage of materials within all leads and lifts and other incidentals.

White washing two coat with lime on undecorated wall surfaces to give and even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter ( on ceiling ) including carriage of material within all leads and lifts and other incidental charges.

Distempering two coats with dry distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including priming coat of whiting after throughly brushing the surface even and smooth and sand papered smooth including entire carriage of material within all leads, lifts and other incidentals.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground and carriage of materials within all leads and lifts and other incidentials charges.

Providing plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) including carriage of materials within all leads and lifts and other incidentials charges.

II Water Supply & Sanitary Installation Providing and fixing vitreous Orissa Pattern china wash down, water closet squatting pan (Indian type W.C. pan) size 580mm (five hundred eighty milimetre) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Providing and fixing in cement mortar 1 : 3 ( one cement : three sand) a pair of vitreous China 250mmX130mmX30mm (two hundred fifty millimetre into one hundred thirty millimetre into thirty millimetre) size foot rests for long pattern squating pan water closet of approved quality including carriage of material within all leads, lifts and other incidentals.

Providing and fixing sand cast iron 100mm (one hundred millimetre) size 'P' or 'S' trap for water closet (squating pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (one cement : one sand) including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 75mm (seventy five millimetre) size sand cast or cast iron spun spigot and socket soil waste and ventilating pipes of superior quality (lead caulked joints to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 75mm (seventy five millimetre) size sand cast iron or cast iron spun fittings and accessories bends of required degree (any radius) with oval acess door insertion rubber washer 2mm thick (two millimetre) thick with nuts and bolts of approved quality including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 75mm (seventy five millimetre) size sand cast iron or cast iron spun fittings and accessories bends of required degree (any radius) with plain including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 75mm (seventy five millimetre) size sand cast iron or cast iron spun fittings and accessories bends of required degree (any radius) with Collar including carriage of material within all leads, lifts and other incidentals.

Providing 100mm (one hundred millimetre) diametre lead caulked joints to sand cast iron cast (sun) iron pipes and fittings including testing of joints including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 100mm (one hundred millimetre) nominal size mild steel stay and clamps for sand cast iron pipe including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 100mm (one hundred millimetre) diametre nominal size cast iron cowl of approved quality including entire carriage of material within all leads, lifts and other incidentals.

Providing and fixing 10.00/12.50/15.00 (ten obleque twelve point five zero obleque fifteen litre capacity vitreous China low level flushing cistern with a pair of cast iron or mild steel brackets complete with fittings such as lead valve less syphon, 15mm (fifteen millimetre) nominal size brass ball valve with polythene float, chromium plated brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm (forty millimetre) diametre chromium plated flush bend including cutting the holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measures and paid for separately) including entire carriage of material within all leads, lifts and other incidentals.

Providing and fixing in position with clamps etcetra 32mm (thirty two millimetre) nominal size internal diametre galvanised steel plate flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors including carriage of material within all leads, lifts and other incidentals.

Providing and fixing galvanised iron inlet connection for flush pipe with water closet pan including carriage of material within all leads, lifts and other incidentals.

Providing and fixing galvanised steel chain with galvanised pull including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 550mmx 400mm (five hundred fifty millimetre into four hundred millimetre) size viterous China wash basin with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 32mm (thirty two millimetre) nominal bore PTMT waste coupling of approved quality and colour including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 75mm (seventy five millimetre) nominal diametre cast iron floor trap of superior quality with self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making good the walls and floors including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 100mm (one hundred millimetre) size sand cast iron grating of approved quality for gully, floor or nahani trap including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) diametre chromium plated brass bib tap with capstan head of superior quality including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) diametre Chromium plated stop cock of superior quality including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 32mm (thirty two millimetre) diametre chromium plated brass chain 50 (fifty) cemtimetre long with rubber plug of approved quality for sink and wash basin including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 15mm (fifteen millimetre) nominal bore and 45 (forty five) centimetre long chromium plated connection pipe of approved quality with brass unions including carriage of material within all leads, lifts and other incidentals.

Supplying cast iron cover without frame for manhole for frame of internal dimension 455mmx610mm (four hundred fifty five millimetre into six hundred ten millimetre) rectangular cast iron cover (light duty single seal pattern-I), the weight of cover should not be less than 23kg. (twenty three kilogramme including carriage of material within all leads, lifts and other incidentals.

Constructing manhole with R.C.C. top slab in 1:2:4 mix ( One cement : two sand : four graded stone aggregate 20mm (twenty millimetre) nominal size foundation concrete 1:4:8 ( one cement : four sand : eight graded stone aggregate 40mm nominal size ) inside plastering 15mm thick with cement mortar 1:3 ( one cement : three sand ) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix ( One cement : two sand:four graded stone aggregate 20mm (twenty millimetre) nominal size ) finished smooth complete including curing and testing inside size 800x800x500mm deep including C.I. cover with frame ( Light duty single seal pattern ) 455mm x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (Weight of cover 23Kg and weight of frame 15 Kg ) with 200mm thick wall of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( one cement : three sand ) including all leads, lifts and carriage of materials as per entire satisfaction of Engineer-in-charge.

Providing and fixing 1000 (one thousand litre) net capacity PVC water storage tank of ISI 12701 marked, galvanised iron inlet and outlet connection,15mm (fifteen milimetre) nominal bore ball valve and mosquito proof PVC coverwith locking arrangement including hoisting upto all heights above ground level including all leads, lifts and carriage of materials as per entire satisfaction of Engineer-in-charge.

Providing and fixing to wall ceiling and floor 15mm (fifteen millimetre) nominal bore galvanised mild steel tubes (medium grade) of superior quality with tube fittings and clamps including making good the wall, ceiling and floor including entire carriage of material within all leads, lifts and other incidentals.

Providing and laying in trenches, 15mm (fifteen millimetre) nominal bore galvanised mild steel tubes (heavy grade), tube fittings of approved quality including carriage of material within all leads, lifts and other incidentals (earth work in trenches to be measured and paid for separately).

Rajender Kumar