Providing & Supplying Furniture at I.T.I. building at Virpur Ta. Virpur Dist. Mahisagar

No. Figures Amount

1 Medium back revolving & tilting chair (M39) 21.00 No. 9595.00

Providing and supplying Medium back chair for conference with M.S.

frame work. Upholstered with changeable fabric upholstery covers (as

per requirement) and molded PU foam, together with molded seat &

back covers. The back foam should be designed with contoured lumber

support for extra comfort. Caster of high durability & hydraulic. The chair

should have cylinder with 5 years warranty. The size of chair 47.5cm x

58cm (Back side) and 49cm x 48cm (seat size). The PU foam should be

molded with density = 45 ± 2 kg/m3 with One-piece armrests. The

armrests are scratch and weather resistant. The permanent contact

mechanisms are designed with 360° revolving type, with pneumatic

height adjustment & 17° maximum tilt only & tilt tension adjustment

2 Low back revolving & tilting chair (M39) 50.00 No. 6060.00

Providing and supplying Low back chair for work center & other staff the

seat & back are made of M.S. frame work. Upholstered with changeable

fabric upholstery covers (as per requirement) and molded PU foam,

together with molded seat & back covers. The back foam should be

designed with contoured lumber support for extra comfort. Caster of high

durability & hydraulic. The chair should have cylinder with 5 years

warranty. The size of chair 45cm x 45cm (Back side) and 45cm x 43cm

(seat size). The PU foam should be molded with density =45 ± 2 kg/m3

with One piece armrests. The armrests are scratch and weather

resistant. The permanent contact mechanisms are designed with 360°

revolving type, with pneumatic height adjustment & 17°maximum tilt only

& tilt tension adjustment facility.

3 Visitor Chairs (M39) 40.00 No. 5252.00

Providing and supplying Visitor or Guest chair the seat & back are made

of 12mm thick hot-pressed plywood upholstered with changeable fabric

upholstery covers (as per requirement) and molded PU foam, together

with molded seat & back covers. The back foam should be designed with

contoured lumber support for extra comfort. The size of chair 45cm x

38cm (Back side) and 45cm x 43cm (seat size). The PU foam should be

molded with density = 45 ± 2 kg/m3. The armrests with Leg made with

back fixed with MS structure with required necessary hardware.

It. Rate in Total

Description of Item Qty. Unit

No. Figures Amount

4 Table - Admin 11.48 Sq.m. 11332.20

Providing and supplying Table made with 19mm thick Plywood(M1)

structure as per architect drawing finished with 1.0 mm thick decorative

laminate (M24) on outside portion & 0.8 mm thick liner Laminate inside

as specified & approved by architect fixed with necessary fixtures and

fastening (Hardware) (M14) as per architect drawing. Provide Plastic

Computer Desk Table Grommet Cable Wire Outlet Hole Cover 60mm,

Key-board trey, Soft-board, S.S. legs, Drawers with telescopic roller

channels (M15), Handle (M19) and locking (M16) arrangements with all

necessary fixtures and fastening (M14). Provide Shutters as per drawing

fixed with handle (M19), hinges (M18), magnet (M14), complete with

bidding patties and all required hardware (M14). Provide footrest as per

drawing. All exposed edges shall be covered with required Teak wood

beading Patti (M4) finished with approved melamine polishing (M29)

work. Complete as per architect's drawing and as per instruction of

architect & engineer in charge. (Refer drawing)

5 Table – Staff :- 9.61 Sq.m. 10587.83

Providing and supplying Table made with 19mm thick Plywood (M1)

structure as per architect drawing finished with 1.0 mm thick decorative

laminate (M24) on outside portion & 0.8 mm thick liner Laminate inside

as specified & approved by architect fixed with necessary fixtures and

fastening (Hardware) (M14) as per architect drawing. Provide Plastic

Computer Desk Table Grommet Cable Wire Outlet Hole Cover 60mm,

Key-board trey, S.S. legs, Drawers with telescopic roller channels

(M15), Handle (M19) and locking (M16) arrangements with all necessary

fixtures and fastening (M14). Provide Shutters as per drawing fixed with

handle (M19), hinges (M18), magnet (M14), complete with bidding

patties and all required hardware (M14). Provide footrest as per drawing.

All exposed edges shall be covered with required Teak wood beading

Patti (M4) finished with approved melamine polishing (M29) work.

Complete as per architect's drawing and as per instruction of architect &

engineer in charge. (Refer drawing)

6 Three seated sofa 1.00 No. 25250.00

Providing and supplying sofa. (3 seated) made with using 19mm thick

Plywood (M1) structure frame with S.S. legs required necessary support

fixed with necessary fixtures and fastening (Hardware) (M14). It shall be

covered with 32 Density PU foam (M22) with required thickness as per

design in seat & back and handle portion this should be again covered

with 14 mm thick PU foam (M22) with Madarpat cover on it &

upholstered fabric (M26) or leather of suggested & approved by architect

finished with seat, back & all visible side as per architect drawing.

Complete as per architect's drawing and as per instruction of architect &

engineer in charge. (Refer drawing)

7 Wooden cup with Glass 12.60 Sq.m. 5069.19

Providing and supplying Full height Storage, Low Height Storage unit

made with using 19mm thick Plywood (M1) structure and finished with

1.0 mm thick decorative laminate (M24) sheet on outside & and 0.8 mm

thick liner laminate (M25) in inside as specified / approved by architect,

fixed with necessary fixtures and fastening (Hardware) (M14), as per

architect drawing. The similar Ply + laminate made shutter shall have

6mm thick glass, fixed with required handle (M19), hinges (M18), magnet

(M18) & Locks (M16) complete with bidding patties (M4) and all required

hardware (M14). Ply shelves removable type supported on side teak

wood (M5) battens on both sides. All exposed edges shall be covered

with 8 mm thick teak wood beading Patti (M4) finished with melamine

polish (M29). Complete or as directed as per architect drawing and as

per instruction of architect & engineer in charge. (Size: 1200mm x

It. Rate in Total

Description of Item Qty. Unit

No. Figures Amount

8 Roller blinds 173.97 Sq.m. 2834.16

Providing and supplying Roller Blinds assemblies are to be supplied &

installed in all windows with great precision. It should be water resistant

and fitted on aluminum head rails duly powder coated and fitted with

stainless steel drive rods. Manual operated and should have ISI mark.

Complete or as directed as per architect & engineer in charge. (M34)

9 Student Bench (2 Seated) 128.00 No. 6262.00

Providing and supplying TYPE : Steel structure of MS angle & made with

using 19mm thick Plywood (M1). Structure finished with 1.0 mm thick

decorative laminate (M24) sheet fixed with necessary fixtures and

fastening (Hardware) (M14) top, Seat & Back rest with MS structure.

STRUCTURE : Made of MS square box section 25 x 25 x 2.6 mm

welded and one coat of metal primer of reputed made shall be applied

after proper surface finishing and applying putty on the surface and over

it one under coat and one final coat of superior quality synthetic enamel

paint of standard make and ISI market confirming to IS- 2392 shall be

applied. The whole consignment of supply order shall be painted in the

10 STORAGE RACK 5.00 No. 8188.58

Providing and supplying rack having size of 1830 MM (H) x 1500 MM

(W) x 400 MM (D). The entire structure should be made grade box tube

size :- 40 x 40 mm x 2 mm wall thickness and 1.2mm thickness grade

sheet shall rest on Shelves. All M.S. part should be completed in matt

finish by buffing process. The quoting price should be inclusive of all

types of taxes & duties, packing, transportation, forwarding, loading,

unloading, installation. Supplied strictly as per our technical

specifications and make. As per choice of users department and concern

officers in charge and detailed drawing. As per the direction of the

engineer in charge.

11 Library Table 6.48 Sq.m. 5708.52

Providing and supplying Display table made with using 19mm thick

Plywood (M1) structure finished with 1.0 mm thick decorative laminate

(M24) sheet approved by architect fixed with necessary fixtures and

fastening (Hardware) (M14). Top portion of table all edges shall be

covered with required Teak wood beading Patti (M4) finished with

approved melamine polishing (M29) work. Complete as per architect’s

drawings and as per instruction of architect & engineer in charge. (Refer

Table size :- 16/1 = 135 x 90 x 75(H) cm

12 Revolving Stool :- 124.00 No. 2525.00

Providing and supplying Stool with revolving seat, made from M.S. frame

structure, with a (360º Swivel) rotatable seat made of SS 304 (no

cushion), to rotate freely in all directions without jamming. All necessary

fixtures and fastening (Hardware) (M14). M.S. frame structure shall be

applied with approved superior quality synthetic enamel paint confirming

to IS-2392. Complete as per architect’s drawings and as per instruction

of architects and engineer in charge.

M.S. structure of stool : Square box pipe size 25 x 25 x 1.25mm

It. Rate in Total

Description of Item Qty. Unit

No. Figures Amount

13 Seminar hall Stage :- 43.44 Sq.m. 4970.21

Providing and supplying seminar hall stage made with using 19mm thick

plywood (M1) and good quality teak wood (M5) frame structure with

required necessary legs support fixed with necessary fixtures and

fastening (hardware) (M14) All exposed edges shall be covered with

required teak wood beading Patti (M4). The whole workshop and lab

stage finished with approved superior quality synthetic enamel paint of

standard make and ISI market confirming to IS-2392 shall be applied.

Complete as per architect’s drawings and as per instruction of architect

and engineer in charge. (Refer drawings)

Size :- Refer Drawing (as required)

14 Providing & fixing Computer table of size 0.65 x 0.65 mt & height 0.75 21.13 Sq.m. 14281.40

mt for work station using 19 mm thick all proof plywood of BWR

confirming to IS 710 of green or century make, designs & grooves as

directed by architectural drawings, lamination of 1.0 mm thick in single or

double shade of green, broom or equivalent make of plain or texture

finish including necessary keyboard drawer, stand for CPU size 50 x

cm or size as directed, necessary SS Screws, handles, magnet, hinges,

khili, cable passing arrangement, drawer lock of godrej make also

including telescopic channel of hetthich, sleek or efficient make, teak

wood foot rest of size as directed, necessary teakwood beading,

melamine polishing to exposed edges including 1 mm lamination for all

visible faces & white 0.8mm lamination on bottom or non visible faces as

directed by engineer-in-charge etc. complete.

15 Providing and Arranging S.S. Nickle chrome plated Dustbin having 20.00 No. 1480.66

254 mm dia. & 356 mm height with perforated S.S. sheet having

thickness 18G including all necessary fixture, fasteners, fittings, labours,

in charge.

16 Providing & fixing for making full height partition (including Glass Door 41.58 Sq.m. 8014.35

and Window) having 12 mm thick Marin plywood of IS 710 both side of

aluminum framing with mirror on three sides of 1500mm x 600mm.

Aluminum framing size for vertical & horizontal support is 50 mm x

mm. and 50mm x 50mm (5.50 gm/cmt) made by aluminium jindal section

of 16 guage having grid of 600mm x 600mm and all exposed surfaces

finished with 1.5 mm thick laminate of approved shade without any air

gap and grooving as per design. Necessary framing to be erected about

false ceiling. No extra cost to be paid for the same. Before installation,

make hole / face plate for conduit pipes of electrical / networking cables

with open able stud from partition including all materials and labour etc.

Make necessary grooves as per shown in drawing. All bottom ends are

covered with Ghana teak bidding patti finished with laminate complete

with all necessary hardware & adhesives as per details given in drawing

and as per instructions of Architect /consultant / Engineer in charge.

Contractor has to provide all necessary cut outs (race ways) for

electrical works & no extra payment shall be made for it.

17 Providing & supplying Lectern of Size : 24 inch x 17 inch and height of 7.00 No. 11034.25

42 inch with square MS pipes with coating & finishing as approved by

engineer in charge.

18 Providing & supplying shoe rack of size & Cap. sufficient for 24 pairs 3.00 No. 7575.00

with M.S. structures with coating & finishing as approved by engineer in

19 Providing & supplying automatic door closure with damping and stopper 30.00 No. 2525.00

mechanism of premium brand as approved by engineer in charge.

It. Rate in Total

Description of Item Qty. Unit

No. Figures Amount

20 Providing & fixing S.S. net of opening size 1 inch x 1 inch of premium 180.00 Sq.m. 1451.88

brand as approved by engineer in charge including all fixtures & fittings.

21 Providing and fixing in position 300 mm high, 150 mm wide English / 50.00 No. 505.00

Gujarati letters made from 1.0 mm thick stainless sheet as directed by

Engineer-in-charge with all necessary tools & plants etc. complete.

TOTAL Rs.

i.e. Rs. Fourty lacs Sixty Three thousand Nine hundred Ninety Three and Thirty Five paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. _____________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by

me and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Balasinor (R & B) Sub Division, Mahisagar (R & B) Division, Mahisagar (R & B) Division,

Balasinor Lunawada Lunawada