Himachal

Cancelled

Works

Electrical Works

Construction of Judicial Court Complex at Dehra,Tehsil Dehra Distt. Kangra (H.P.) under Centrally sponsored Scheme for the development for infrastructure facility for Judiciary.(SH Construction of 3 Nos court halls(1 No. for ADJ and 2 Nos for Civil

New corrigendum available: Cancellation of Tender #1.

Public Works Department

Dehra | Kangra, Himachal Pradesh

Amount: ₹34.2 LCloses: 17 Aug 2026Closed

Timeline

Published10 Aug 2026
Cancelled11 Aug 2026

Corrigenda

Corrigendum

1 updatesLatest on 27 Aug 2026

Cancellation Details

Cancellation of Tender

corrigendumCancellation of tender due to administrative /technical reasonReason: Due to admistrative reasons/issuesDocument: cancelled_1.pdf

Published 11 Aug 2026

Tender Value

₹34.2 L

EMD Value

₹68,400

Closing Date

17 Aug 2026, 11:00 amClosed

Tender Inviting Organisation

Name

EXECUTIVE ENGINEER

Address

ELECTRICAL DIVISION HPPWD PALAMPUR

Work Description

SH Construction of 3 Nos court halls(1 No. for ADJ and 2 Nos for civil Judge) (Pdg fire fighting system therein).

Tender Information

Tender ID

2026_PWD_140886_2

Reference Number

Electrical Division HPPWD Palampur

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Percentage

Location

Dehra

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredReceipt of online payment towards the cost of bid document and Earnest Money Deposited (.pdf)

RequiredThe Lowest contractor /Firm (L-1) shall submit the compliance report/ vetted by the OEM as per ap (.pdf)

RequiredCopy of GST, PAN, EPF Certificate, Income Tax Return filled. (.pdf)

RequiredAverage Annual financial turnover during the last 3 years, ending 31st March of the previous financi (.pdf)

RequiredWork Done (similar work) as per tender document (.pdf)

RequiredForm No.7/8 duly filled and signed by the contractor (.pdf)

RequiredDeclaration by the Contractor duly filled and signed (.pdf)

Finance

RequiredBill of Quantity (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,000

EMD Fee Amount

₹68,400

Important Dates

Last Activity

11 Aug 2026

Published

10 Aug 2026

Bid Opening

17 Aug 2026

Download Starts

10 Aug 2026

Download Ends

17 Aug 2026

Submission Starts

10 Aug 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (54 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required in all respect and to the best satisfaction of Engineer-in-Charge.Makes:- Fabricated item.	1	Each	20,194	₹20,194
2	Providing, fixing, testing and commissioning of Perched air vessel (size 450 mm dia & 2000 mm height) for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design / requirement) with valves to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, minimum 50 mm dia inlet with isolating valve duly painted from inside and outside with two coats of synthetic enamel paint over a coat of primer complete as required and Suitable cement concrete foundation with plaster, along with all neccessory floor supporting stand and foundation arrangement.(Vessel should be suitable for rated working pressure) as required complete in all respects and to the best satisfaction of Engineer-in-charge.	1	Each	57,622	₹57,622
2.01	Makes:- Fabricated item.	-	-	-	-
3Providing, laying, jointing, testing and commissioning of following sizes of MS 'C' Class (Heavy duty) pipes conforming to IS-1239 with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be of iron unless specified otherwire and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted including synthetic enamel paint of approved shade over a coat of zinc primer.Priorto application of primer the surface should be cleaned dirt,rusts,rough substance etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.
3.01	25mm dia pipe	11	Per Meter	582	₹6,402
3.02	80mm dia pipe	17	Per Meter	1,523	₹25,891
3.03	100 mm dia pipe	22	Per Meter	2,083	₹45,826
3.04	150 mm dia pipe	184	Per Meter	2,942	₹5,41,328
3.05	200 mm dia. Pipe	18	Per Meter	4,441	₹79,938
3.06	Makes:- Jindal/Tata./Surya Tube.	-	-	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.21 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.38 MB

Work Item Documents

DECLARATION.pdf

Additional Documents • 0.01 MB

FFFire.pdf

Tender Documents • 3.85 MB

BOQ_209080.xls

BOQ • 0.35 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required in all respect and to the best satisfaction of Engineer-in-Charge.Makes:- Fabricated item.

Each

20,194

₹20,194

Providing, fixing, testing and commissioning of Perched air vessel (size 450 mm dia & 2000 mm height) for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design / requirement) with valves to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, minimum 50 mm dia inlet with isolating valve duly painted from inside and outside with two coats of synthetic enamel paint over a coat of primer complete as required and Suitable cement concrete foundation with plaster, along with all neccessory floor supporting stand and foundation arrangement.(Vessel should be suitable for rated working pressure) as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Each

57,622

₹57,622

2.01

Makes:- Fabricated item.

3Providing, laying, jointing, testing and commissioning of following sizes of MS 'C' Class (Heavy duty) pipes conforming to IS-1239 with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be of iron unless specified otherwire and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted including synthetic enamel paint of approved shade over a coat of zinc primer.Priorto application of primer the surface should be cleaned dirt,rusts,rough substance etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.

3.01

25mm dia pipe

Per Meter

582

₹6,402

3.02

80mm dia pipe

Per Meter

1,523

₹25,891

3.03

100 mm dia pipe

Per Meter

2,083

₹45,826

3.04

150 mm dia pipe

184

Per Meter

2,942

₹5,41,328

3.05

200 mm dia. Pipe

Per Meter

4,441

₹79,938

3.06

Makes:- Jindal/Tata./Surya Tube.