REPAIRS TO VACANT QUARTERS AT SAILORS AREA, DOLPHIN HILL UNDER GE (NB) VISAKHAPATNAM

Amount

Taking up or down 15mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Taking up or down 20mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Taking up or down 25 or 32 mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Supply, laying, connection and testing, 16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Supply, laying, connection and testing, 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Supply, laying, connection and testing, 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S & F in repairs, vitreous China wash basin, size 550 x 400mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S & F in repairs Hand Shower (Health Faucet) with 1 Meter Long, brass with SS tube and ABS hook, 15mm bore complete all as specified and directed. (Make: Prayag Cat No. BEA-106 or equivelant of make as per List of manufacturer's)

S & F in repair stainless steel Grating, 110mm dia fixed with white cement complete all as specified and as directed.

S & F in repair stainless steel Grating, 75mm dia fixed with white cement complete all as specified and as directed.

S & F in repairs, Brass CP mixer with 3-in-1 system for mixing hot & cold water screwed down for iron pipe, 15mm bore and fixed complete all as specified and directed

S & F in repairs 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repair 40 mm dia, Low density, Polyethylene (LDPE) pipe of pressure rating 6 Kg/cm2 including all fitting required complete all as specified and directed.

S & F in repairs, plastic water closet, Seat and Cover for pedestal pan, white / black, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

S & F in repairs PVC syphonic kit (any type/any pattern) suitable for 10 litre capacity low level flushing cistern and making the cistern functional in all respectcomplete all as specified and directed.

S & F in repairs, Stainless steel, kitchen plate rack of size 24x30x10 inch as per existing design and specification as approved complete all as specified and directed. (Make: Prayag Cat No. P-330 or equivelant of make as per list of manufacturer's)

S & F in repairs, stainless steel sinks made of 1 mm thick sheet with plugs, washers and wastes including bedding in ement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F 100 litres capacity, rotational moulded polyethylene loft water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one complete all as specified in SSR Part I and as directed.

S & F in repairs, 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair 15 mm bore, angular stop valve, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 125 mm size, shower rose, brass chromium plated, swival type, complete all as specified and directed.

S & F in repairs Soap dish of standard size, stainless steel, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed.

Taking down vitreous China wash basin or sink of any size with backets and refixing in the same position after replacement of brackets as per the existing specification complete all as specified and directed.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window / Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp?ressive strength of58N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property ofbeingtermite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetly complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window / Ceosetory windows & other Frames/Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp?ressive strength of58N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property ofbeingtermite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetly complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp?ressive strength of58N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property ofbeingtermite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetly complete all as specified and directed.

S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc [without sash bars] edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters shall be as specified in SSR Part-I, Section 8, Clause 8.24 (a) supplied and fitted to chowkat complete all as specified and as directed.

S & F Powder coated (minimum 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : (i) Thickness of aluminium section shall not be less than 1.5 mm).

S&F aluminium door /window/ventilator shutters powder coated of any colour (Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, powder coated aluminum snap beading screws etc. complete all as specified and directed

Providing and fixing Powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge complete all as specified and directed.

S & F 125 mm long, stainless steel butt hinges fixed with stainless steel hinge pin etc complete all as specified and directed.

S & F 100 mm long, stainless steel barrel tower bolts (ISI marked) of extruded section fixed with screw complete all as specified and directed.

S & F 150 mm long, stainless steel barrel tower bolts (ISI marked) of extruded section fixed with screw complete all as specified and directed.

S & F 125 mm long, stainless steel handle (ISI marked) complete all as specified and directed.

S & F 150 mm long, stainless steel handle (ISI marked) complete all as specified and directed.

S & F 300 mm long stainless steel sliding door bolt (ISI marked) with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts and slideing bolts of extruded sections complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed.

S&F factory made, ready to install , non toxic lead and cadmium free , single extruded, 3 side prelam, solid (non hollow) WPC door frame (single rebated) of size 75 x 50 mm and having water proof, termite proof, fire retardent and with excellent screw holding capacity, mitred cuts at two corner and joined with MS screws on each side and fixed to the existing wall using (10 x 100mm) long MS screws to through the frame by using PVC fasteners, minimum 4 Nos of MS screws to be provided for each vertical post and minimum two Nos. MS screws to be provided on horizontal member complete all as specified and directed.

S&F 18 mm thick factory made, ready to install , non toxic lead and cadmium free , single extruded, water proof, termite proof, fire retardent and with excellent screw holding capacity, solid WPC board, one side decorative choice lamination and other side balancing white as in cup board shutter fixed to door frame with and including crack '0' hinges of suitable size and stainless steel screw including lipping the cut edges with same materials finish complete all as specified and directed.

S&F 18 mm thick factory made, ready to install , non toxic lead and cadmium free , single extruded, water proof, termite proof, fire retardent and with excellent screw holding capacity, solid WPC board, one side decorative choice lamination and other side balancing white as in cup board shelves fixed in and including WPC guide rail and stainless steel screw including lipping the cut edges with same materials finish complete all as specified and directed.

S&F in repairs 20 mm dia and 1.50 to 2.00 mm thick stainless steel rod as in cupboard with stainless steel brackets of supirior quality complete all as specified and directed.

S & F in repair 100 mm size hasp & staple (ISI marked), bolt type, stainless steel with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F 75 mm long, stainless steel barrel tower bolts (ISI marked) of extruded section fixed with screw complete all as specified and directed.

S & F in repair Floor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repair 25 mm dia, PVC coated MS curtain rod with brass brackets of superior quality complete all as specified and directed.

S & F in repairs 75 mm, 6 lever, Brass, Mortice Lock, vertical type with two keys complete all as specified and directed.

S & F in repairs, 75mm size, night latch with two levers, brass body, polished bright; vertical type with brass knob or lever handle and fixed complete all as specified and directed.

Taking down aluminium doors / Window shutters / ventilators of any size carrying out minor repairs / adjacement including replacement of rubber beading, aluminium beads, cleats of as required size and refixing in same position complete all as specified and directed.

S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flape when open complete all as specified and directed.

S & F In repairs, aluminium bottom strips for entrance doors, Minimum 0.5mm thick, 20 to 25mm wide to arrest entry of insects including fabric dust remover fixed at the bottom of the strip complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish to a distance n.exc 100m as directed by the Engr-in-Charge.

M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal of debris and rubbish to outside MD land complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for Glazed, ceramic, coloured tiles of size 300mm x 200mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar and removing rubbish upto a distance outside MD land complete all as directed by the Engr-in-Charge.

M & L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortor 1:6 & cutting, polishing complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

S & F in repairs, 300 mm long, mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete all as specifed and directed.

M & L for post construction Antitermite treatment by treating At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

M & L for Granite floor strips coloured of 18 to 25mm thick , width not exceeding 10cm for the door cills fixed with approved quality adhesive complete all as specified and as directed.

S & F in repair, 32mm dia flexible PVC waste pipe, 800mm long for wash basin/sink etc complete all as specified and directed.

S & F in repairsbrass spindle (heavy) suitable for bib taps / stop valve of 15 mm bore complete all as specified and directed.

Removing kitchen drainage block from the waste pipes by removing grating and removing waste materials from traps, bends etc carefully and roding with flexible GI wire to clear blocking including disposing the waste materials complete all as specified and directed.

Removing blockages from soil pipes or from WCs by carefully roding with split bamboos or flexible GI wire etc including cleaning the toilets by flushing water and disposingany removed soil materials complete all as specified and directed.

Cleaning of blockage in the internal water supply lines, concealed or fixed on the wall or floor surfacesby taking down existing fittings like taps / valves etc to facilitate clearence of blockage and refixing the fittings in original position after clearence of blockage complete all as specified and directed.

M & L for Filling of cement mortar in sides of nahani trap, gully trap, rain water pipes out let etc. in CM 1:3 including WPC @ 2% by weight of cement or as per manufacturers instructions and making good finishes to arrest leakage / seepage complete all as specified and as directed.

M & L for grouting of tiled floor with cement slurry or cement mortar 1:3 with and including mixing of pigments as reqirred or water proofing compound complete all as specified and directed.

M & L for filling polymer modified non shrinking slurry for sunken floors for toilets by drilling holes to a depth of 60 mm x 20 mm dia at 1 mtr interval and applying 2mm thick brush bond over the concrete surfaces by mixing acrylic emulsion with brush bond powder and water all as per manufacturer's instruction complete all as specified and directed. (Make: Chemical shall be of NITO BOND BB of Fosroc or equivalent from approved make list.)

M & L for providing two components acrylic polymer modifiede cementious elastometic water proof coating, minimum 1.50 mm thickness (DFT) with nominal coverage of 2.20 Kg/ Sqm including thorough preparation of surfaces by mechanical means to obtain a plain and level surface including sprinkling of clean and washed sand on final coat when wet all as per manufacturer's instruction complete all as specified and directed. Note: (a) The coating shall have minimum 1 N/mm2 tensile strength, elongation of a minimum 80% when tested as per ASTM D 412, resisting 5 bar hudraustatic pressure as per DIN 1048 and having crack bridging ability of upto 2 mm. (b) The coating shall cover all the wet areas of floor and the vertical walls for a height of minimum 4' above the floor. (c) The rates quoted shall deemed to be included for the following:- [i] filling of all cracks and crevices with approved epoxy based mortar and make good to receive waterproof coating tretment. [ii] Providing additional coat reinforced with a fiber band sandwitched between 1st and 2nd coat along the periphery of the toilet floors, around protrusions and around pipes.

Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to outside MD land complete all as specified and directed.

M & L for Plain cement concrete 1:5:10, type E-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed.

M & L for preparing old decorated plastered surfaces of ceiling, etc and applying one coats of white wash complete all as specified and directed.

M & L for preparation new external surfaces of wall, chajja, facia etc by "Vaccum based sanding machine" and applying two coats of oil bound distemper over a coat of alkali resistance primer by "Auto Roller" machine as per manufacturer's instruction complete all as specified and directed. (Note: Oil bound distemper shall be applied according to smart painting method as specified here in after.)

M & L for preparing old decorated surfaces of wall, etc by "Vacuum based sandng machine" including cornces by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of distemper oil emulsion by "Auto Roller" complete all as specified and directed. (Note: Oil bound distemper shall be applied according to smart painting method as specified here in after.)

M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS (BID ID -3049649)

K NAGARAJU (BID ID -3049709)

SRI RAJA RAJESWARI ENTERPRISES (BID ID -3049984)

SRI SRK ENGINEERS (BID ID -3049885)

ANAND INFRA (BID ID -3049696)