POWER BORE WELL

Geoligist Charges ForTesting the bore well Point to complete for finished item of work as directed by the engineer-in-charge.

Total depth drilling 165mm / 61/2" dia and inserting total depth 140mm dia PVC casing pipe.Drilling of 165mm (6 1/2) dia borewells in all formations entire/total depth as desired by the department and reaning the bore well to insertion of suitable dia PVC casing pipe of 6 kg/cm2 and any other relevant material required up to the depth as directed by the department including cost of transportation of rigs and supporting vehicle from village to village and bore development (flushing the bore well at an average pressure of 100PSI/conducting yield test ,crew charges, cost of consumable and all other charges required complete but excluding taxes ,cost of PVC casing pipe and the entire work has to be done to the satisfaction of department authorities and as per IS 2800part I&II 1979 any where in Khammam district where particular places recommended by the Geologist and work carried out under directions of the department officials.

Supply and delivery of 180mm dia PVC 10 kg/cm2 casing pipe of 3.00m. In length approximately and delivery at work site, ISI mark including TOT confirming to IS 4985/1988

Supply and delivery of 250 mm dia PVC 10 kg/cm2 casing pipe of 3.00m. In length approximately and delivery at work site, ISI mark including TOT confirming to IS 4985/1988

Manufacture, supply, & delivery of Polyethylenepipes (PE-100 Grade) for water supply conforming to IS 4984 2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.)

ELEC-5.6.1:: Supply and Transportation of 1.50HP 21 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well. Makes: Texmo / CRI / KSB / Aryenvarsha / Lubi / Falcon

Supply and Transportation of controlpanel for single phase submersiblemotors up to 3 HP @ 220V 50Hzoperating range between 80 to 240Vincluding supply and fixing of Direct -on - Line LK / SIEMENS / CROMPTONmake Volt meter and Ammeter withstarting and running capacitorsassembled with ISI mark contactors andfitted with ISI mark MCB etc.,complete.

S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete

Supply, Transportation and fixing of 50 mm dia 90 degree bend with length of 20cm (Center to face) galvanised GI bends heavy duty with threaded at both ends for installing the pump set including cost and conveyance of all materials, taxes etc., complete

Supply of 3 core 2.50 Sqmm Flat Copper cable of ISI for Submersible Motors including cost and conveyance of all materials including cost and conveyance of all materials, taxes etc., complete

Supply and fixing of 6 Sqmm 7/ 18 WPSC (weather proof single core ISI aluminium wire including cost and conveyance of all materials etc complete

Supply, Transportation and fixing of 50mm dia 450mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts.

Supply, Transportation and fixing of 50mm dia MS flanges set (2 Nos) 150mm dia OD, 12mm thick each flange with required dia bolts and nuts including cost and conveyance of all materials, taxes etc., complete.