Special Repairs and Improvements to existing CPWS Scheme to Nagulapalli of U.Kothapalli Mandal in Kakinada District

Supply and delivery of 180mm dia HDPE 6 Kgf including cost and conveyance, excluding taxes etc. complete for 1.00 Rmt. From PBC Canal to SS Tank.

Earth work excavataion for pipe line trenches manually in all soils except rocky soils including lowering, laying and jointing of pipes with required fittings/specials true to alignment and gradient, refilling with already excavated earth, watering, tamping and removing surplus earth testing to required hydraulic test pressure etc. complete excluding cost of specials/fittings for finished item of work for 1.00 Rmt.

Supply, Delivery and fixing of Tamper Proof DI Flanges Swing check Valve PN 1.6 with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating (EP-P) IMin:250 Micron) inide and outside of Color Blue RAL 5005. All internal parts such as Float, Shell, Cove Boilts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of an other components with ABS/PTEF/EPDM/NBR and generally confirming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS-1538 and including cost and supply of Air Valve, required specials to suit the pressure class of pipe, jointing material, loweringa and fixing of valves and including construction of RCC Valve chamber of department approved size for pipe dia upto 900mm and providing Grill alround and on top with 10 mm suqare rods @ 100 mm c/c spacing with front openable grill with necessary hinges and 150mm dia on 180mm dia HDPE Pipe.

Earth work excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and barcing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Filling of foundation with sand including cost, conveyance, watering and ramming etc. complete.

CC (1:4:8) using 40mm HBG metal including cost and conveyance of the all materials etc. complete.

VRCC (1:1.5:3) using 20mm HBG metal including cost and conveyance of all the materials, but excluding the cost of steel etc. complete for Columns footing.

VRCC (1:1.5:3) using 20mm HBG metal including cost and conveyance of all the materials, but excluding the cost of steel etc. complete for Columns.

VRCC (1:1.5:3) using 20mm HBG metal including cost and conveyance of all the materials, but excluding the cost of steel etc. complete for Beams.

Brick Masonary with CM(1:6) using Second Class Bricks including cost and conveyance of all the materials etc. complete.

VRCC (1:1.5:3) using 20mm HBG metal including cost and conveyance of all the materials, but excluding the cost of steel etc. complete for Roof Slab with 125mm thick.

Acco Proof Plastering with CM (1:5) 12mm thick including cost and conveyance of all the materials etc. complete.

Flooring with CC (1:4:8) using 40mm HBG metal for 100mm thick and top plastering with CM (1:3) 20mm thick including cost and conveyance of all the materials etc. complete.

Supply and Placing of the HYSD Bars, fabrication including cost and conveyance of all the materials etc. complete.

Removing white wash or colour wash by steel wire brushing and / or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.

Painting with exterior emulsion paint two coats over a primary coat of cement primer including cost and conveyance of all materials and all labour charges etc. comlpete.

Painting with exterior emulsion paint two coats over a primary coat of cement primer including cost and conveyance of all materials and all labour charges etc. comlpete for OHBRs

Painting to walls with single coats of water proof cement paint of approved brand and shade over a base coat of approved cement primer grade 1 making 3 coats in all to five an even shade after thourughly brushing the surface to remove all dirt and remains of aloose powdered materials, including cost and conveyance of all materials to work site and all operationa, incidental, labour charges etc. complete for finished item of work for internal walls

Painting with synthatic enamil paint two coats over a primary coat of white lead including cost and conveyance of all materials etc. complete for wood and iron works

Manufacture, Supply, Delivery, Erection, Testing, Training, Commissioning and maintenance of Micro Filters of 2.00 MLD production capacity comprising of first stage as pulverising quartz, intermediate stage as activated carbon, multiple micro filrration units (Lego filter of 5 Micron or 3000 mesh) and the treated water should fulfil the BIS standards for drinking water quality in all aspects duty chorinate the treated water. The finished rate including packing, transportation, insurance and all operational, incidental charges, all labour charges and maintenance upto defect liability period @ Head works.

Manufacture, Supply, Delivery, Installation, Testing and commissioning of HSC pumpset with 15.00 HP - 2 Nos. (1 Stand by) at Intakewell A.K.Mallavaram PBC Canal including pump, TEFC motor of standard make suitable panel board with all electrical accessories and preventive controls, 16 Sqmm 3.50 core armoured cable, MS suction pipe, delivery pipe of suitable dia and length suitable MS manifold, non return valves, air valves, water hammer control devices etc., complete which includes errection platform, vaccum pump, tool kit etc., complete including overheads and contractor profit @ 13.615% etc., complete but excluding GST complete. at Sump at Head works for Mulapeta line-HP Pump set as per design for Clear Water

Manufacture, Supply, Delivery, Installation, Testing and commissioning of HSC pumpset with 20.00 HP - 2 Nos. (1 Stand by) at Intakewell A.K.Mallavaram PBC Canal including pump, TEFC motor of standard make suitable panel board with all electrical accessories and preventive controls, 16 Sqmm 3.50 core armoured cable, MS suction pipe, delivery pipe of suitable dia and length suitable MS manifold, non return valves, air valves, water hammer control devices etc., complete which includes errection platform, vaccum pump, tool kit etc., complete including overheads and contractor profit @ 13.615% etc., complete but excluding GST complete. at SS Tank Intake well for 2.00 MLD Micro Filters - HP Pump set as per design for raw water with 35m head and 32 lps.

Supply and delivery of Electromagnetic Flow meter, manufacturer should have ISO 9001:2015 certification and flow meter testing conforming to ISO 17025-2017, Flow meter Tube: SS 304,Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement, Liner: Hard Rubber or PTFE suitable for drinking water application, Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316, Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition) , Ingress Protection: IP 68 for sensor and IP 67 for transmitter, Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above, Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow, Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit, Surge Arrester: To be provided, Power Supply and Output: 230 V AC or 24 V DC as applicable to Site condition and 4-20 mA HART, Compatible to SCADA/WEB Based Data acquisition System, Flow meter test lab certification should be provided from NABL approved lab/FCRI , Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall /Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make). Excluding GST for 80mm dia Pipe line

Supply and delivery of Electromagnetic Flow meter, manufacturer should have ISO 9001:2015 certification and flow meter testing conforming to ISO 17025-2017, Flow meter Tube: SS 304,Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement, Liner: Hard Rubber or PTFE suitable for drinking water application, Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316, Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition) , Ingress Protection: IP 68 for sensor and IP 67 for transmitter, Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above, Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow, Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit, Surge Arrester: To be provided, Power Supply and Output: 230 V AC or 24 V DC as applicable to Site condition and 4-20 mA HART, Compatible to SCADA/WEB Based Data acquisition System, Flow meter test lab certification should be provided from NABL approved lab/FCRI , Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall /Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make). Excluding GST for 100mm dia Pipe line

Supply and delivery of Electromagnetic Flow meter, manufacturer should have ISO 9001:2015 certification and flow meter testing conforming to ISO 17025-2017, Flow meter Tube: SS 304,Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement, Liner: Hard Rubber or PTFE suitable for drinking water application, Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316, Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition) , Ingress Protection: IP 68 for sensor and IP 67 for transmitter, Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above, Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow, Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit, Surge Arrester: To be provided, Power Supply and Output: 230 V AC or 24 V DC as applicable to Site condition and 4-20 mA HART, Compatible to SCADA/WEB Based Data acquisition System, Flow meter test lab certification should be provided from NABL approved lab/FCRI , Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall /Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make). Excluding GST for 250mm dia Pipe line

Supply and delivery of Electromagnetic Flow meter, manufacturer should have ISO 9001:2015 certification and flow meter testing conforming to ISO 17025-2017, Flow meter Tube: SS 304,Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement, Liner: Hard Rubber or PTFE suitable for drinking water application, Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316, Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition) , Ingress Protection: IP 68 for sensor and IP 67 for transmitter, Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above, Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow, Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit, Surge Arrester: To be provided, Power Supply and Output: 230 V AC or 24 V DC as applicable to Site condition and 4-20 mA HART, Compatible to SCADA/WEB Based Data acquisition System, Flow meter test lab certification should be provided from NABL approved lab/FCRI , Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall /Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make). Excluding GST for 300mm dia Pipe line