Providing Power Infrastructure at Badanaguppe-Kellamballi Industrial Area 2nd Phase, Chamarajanagar District.

Providing Power Infrastructure at Badanaguppe-Kellamballi Industrial Area 2nd Phase, Chamarajanagar District.

PART-A: Extension of 11KV line(UG Cable) from from existing 3 nos of idle breakers at 66/11kV KIADB Badanaguppe substation:

Providing Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps ...

Providing Compact RMU (VCB/SF6 Type) with

Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-3427 1OD for RMU 630A with all lead and lifts complete as per specifications and directions of engineer i...

Supplying of Frame of MS Channel 100x50 mm and MS angle 40x40x5 mm welding etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Rod type earthing with 40 mm Dia, 3 Mtr long MS rod as per specification & drawing including digging of pit & fixing with all lead and lifts complete as per specifications and directions of engineer i...

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., with all lead and lifts complete as per s...

Providing and fixing GI chain link fabric fencing of required width in mesh of size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the directi...

Supplying and fixing MS Rectangular Angle of size 65X65X6mm fixed in cement cocrete 1:2:4 with 2 numbers of 16mm dia MS holdfast rods for a length of 25cm including cost of all materials, bending, cut...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., with all ...

Supplying of 11 kV, 3 Core 400sqmm (51 GI Wires - 4 mm Dia) , XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as pe...

Supply of Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable for 11KV 3 core 400 sqmm XLPE UG cable with all lead and lifts complete as per specifications and directions of engineer in c...

Supply of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable for 11KV 3 core 400sqmm XLPE UG cable with all lead and lifts complete as per specifications and directions of engineer in c...

Supplying of Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule for XLPE Cable for 11KV 3 core 400 sqmm XLPE UG cable with all lead and lifts complete as per spe...

Supplying of GI Pipe, 150 mm Dia for drain crossing, cable raising etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of HDPE/PLB Pipe 50/42 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Bricks Non Modular for Cable covering with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of Artificial/Manufacture Sand for spreading and forming alround the UG cable to a depth with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying of RCC Hume Pipe 2000 mm long 150 mm Dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Providing Collars for RCC Hume Pipe 150 mm Dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying of Route and Joint indicating stones with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supply of 11KV 400Amps Double Breaker GOS with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Fixing of 11KV 400Amps Double Breaker GOS with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Supply of H-Frame for mounting GOS with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Fixing of H-Frame for mounting GOS with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel etc....

For construction of Foundation :

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar work...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

For construction of Foundation : Providing and laying in position Cement Concrete for all Foundation works including cement slap for transformer. The granite/trap/basalt crushed graded coarse aggregat...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Laying of cable in existing trench/GI pipe/Stone ware/RCC hume pipe using wooden/Aluminium rollers with all lead and lifts complete as per specification and direction of Engineer in charge of the work...

Fixing of Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable for 11KV 3 core 400 sqmm XLPE UG cable with all lead and lifts complete as per specification and direction of Engineer in cha...

Fixing of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable for 11KV 3 core 400 sqmm XLPE UG cable with all lead and lifts complete as per specification and direction of Engineer in c...

Fixing of Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule for XLPE Cable for 11KV 3 core 400 sqmm XLPE UG cable with all lead and lifts complete as per specif...

Fixing of GI Pipe, 150 mm Dia for drain crossing, cable raising etc., with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Laying of UG Cables by Trenchless Technology by adopting Horizontal Boring & Drawing of cable including preparation at site Rock Soil - 8” Bore (UG cable along with upto 5 Nos of 50/42 mm or 40/33 m...

Cable trench excavation, 1000x0.6x1=600, Ordinary soil with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Refilling and consolidation with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Spreading Sand and forming with Sand round the cable with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Laying of Route and Joint indicating stone with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Laying of RCC Hume pipe with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

PART-B: Extension of HT Line / LT Line to proposed Industrial Layout:

Supply of Pre-stressed Tubular Spun Pole 11Mtr long 500Kg WL with all lead and lifts complete as per specification and direction o...

Providing DP Structure at the tapping point using RCC Pole - 9 Mtr Long, 145 Kg WL (Including Cost of Poles) with all accessories as per CDS-15 of ESCOM SR with all lead and lifts complete as per spec...

Supply of RCC poles 9mtr long 145 Kg WL with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Supply of 11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For RCC Pole with all lead and lifts complete as per specification and direction of Engineer in ch...

Supply of Special Cross Arm with Cross Arm for EG Stirrups, braces, clamps, bolts nuts and washers with all lead and lifts complete as per specification and direction of Engineer in charge of the work...

Supply and Fixing of 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Supply of 11 kV, 45 KN Polymeric Insulator with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Supply of Spiral earth electrode with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Supply of Earthing materials pipe type for grounding (Single Electrode with accessories) for Spun poles with all lead and lifts complete as per specification and direction of Engineer in charge of th...

Supply of Coyote ACSR Conductor for formation of 11 KV line, Jumps with 1.5% sag & conductor accessories at 3% with all lead and lifts complete as per specification and direction of Engineer in charge...

Providing P-G Clamps for Coyote conductor with all lead and lifts as per specification and direction of Engineer in charge of the work.

Supplying of Caution / Danger Board with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Supply of Anti - Climbing Device (12mtrs/1kg G.I. Barbed Wire) Lumsum with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Providing Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Supply of Distribution Transformer :

Providing 11kV/433V, 250KVA, 3Phase 50Cys Distribution transformer BEE - 5star rated with oil mounted on 11mtr Spun pole with 3 GOS system as per CDS-31 of ESCOM S...

Supply of LT 2 Pin X arm with pole clamp, bolt, nut and washers with braces MS For RCC Pole with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Supply of LT 4-pin X arm with pole clamp, bolt, nut and washers with braces MS For RCC Pole with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Supply & Fixing of 1.1 kV Ceramic Pin Insulator With GI pin with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Supply and fixing No.8 strain insulator with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Supply of Rabbit ACSR conductor with 1.5% sag & 3% conductor accessories with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Providing P-G Clamps for Rabbit conductor with all lead and lifts as per specification and direction of Engineer in charge of the work.

Erection of Pre-stressed Tubular Spun Pole 11Mtr long 500Kg WL with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Fixing of DP Structure at the tapping point using RCC Pole - 9 Mtr Long, 145 Kg WL (Including Cost of Poles) with all accessories as per CDS-15 of ESCOM SR with all lead and lifts complete as per spec...

Erection of RCC poles 9mtr long 145 Kg WL with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Fixing of 11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For RCC Pole with all lead and lifts complete as per specification and direction of Engineer in ch...

Fixing of Special Cross Arm with Cross Arm for EG Stirrups, braces, clamps, bolts nuts and washers with all lead and lifts complete as per specification and direction of Engineer in charge of the work...

Fixing of Spiral earth electrode type earthing with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Fixing of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Stringing of Coyote ACSR conductor , binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps with 1.5% sag & 3% conductor accessories with all lead...

Fixing of Caution / Danger Board with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Fixing of Anti - Climbing Device (12mtrs/1kg G.I. Barbed Wire) Lumsum with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Erection of Distribution Transformer :

11kV/433V, 250KVA, 3Phase 50Cys Distribution transformer BEE - 5star rated with oil mounted on 11mtr Spun pole with 3 GOS system as per CDS-31 of ESCOM SR and al...

Fixing of LT 2 Pin X arm with pole clamp, bolt, nut and washers with braces MS For RCC Pole with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Fixing of LT 4-pin X arm with pole clamp, bolt, nut and washers with braces MS For RCC Pole with all lead and lifts complete as per specification and direction of Engineer in charge of the work.

Stringing of Rabbit ACSR conductor , binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps with 1.5% sag & 3% conductor accessories with all lead...