GENERAL-PWD Rest House Kozhikode- Canteen-Seperate K S E B metering for PWD Rest House Canteen-General Electrical Work

Separate KSEB metering for pwd rest house canteen kozhikode-General

OD177556/2025-2026:Supply and installation of dust and vermin proof thermoplastic polycarbonate Energy meter enclosure of 600x300x170mm size with hinged Transparent lid, hand operatable screws,meter fixing rails, and with knock outs on side walls etc ,as required - environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive, degree of Ingress Protection IP 65 in accordance with IEC 60529, gasket material of enclosure is Polyurethane; while the gasket is internally embedded.fixing it on wall with screws , nuts ,bolts, washers etc are should be of stainless steel , making good the damages colour washing etc. as required. (Hensel make model Mi 9400 or Techno commercial equivalent approved by engineer in charge).

OD189423/2025-2026:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections, etc as required. 32 A, 415 V, 50 Hz, AC 23 A duty, TPN SDF with ISI marked HRC fuse links

OD158403/2025-2026:Supply and fixing 32 A Fuse base with HRC fuse link in the existing meter board and giving connections etc.

OD158404/2025-2026:Supply and fixing 32A, 2 way neutral link mounted on DMC/ SMC base in the existing box and giving connections etc. as required

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

OD191014/2025-2026:Supplying and fixing following type Padlock-Suitable for Lock Hasp 3.5 - 5 mm dia. max etc. as required. up to 63 A, change over switch / MCB ( L&T make or Techno commercial equivalent.).

OD158410/2025-2026:Supply and fixing 50mm dia 6Kgf/cm2 PVC pipe including fixing the pipe at 60cm spacing. etc on wall with all required accessories and clamps etc. including cutting and making good the walls, painting the exposed portions etc. as required. (KSEB Service pipe)

OD158411/2025-2026:Supply and providing suitable Iron Hook grouted on wall for binding the service wire

90.12.7.41:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp

OD190970/2025-2026:Supply and wiring with ISI marked, FRLS PVC insulated following size single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc with sockets as required. 16 sq. mm 4 run

9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

90.16.2.1:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD160704/2025-2026:Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

OD160705/2025-2026:Providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

OD160710/2025-2026:Supply and provide 12x3mm brass nut and bolt etc. as required

OD160711/2025-2026:Supply and providing 25x3mm brass nut and bolt etc. as required

OD161181/2025-2026:Supply and providing 25x6mm brass nut and bolt etc. as required

OD190966/2025-2026:Providing and fixing 25 mm X 3 mm copper bench

OD189462/2025-2026:Supply and drawing superior quality Aluminium Aerial Bunched Cable of 25 sq mm 5 core with suitable specials for KSEB service connection

OD189463/2025-2026:Supply and providing Dead end clamp with bracket for Aerial Bunched Cable with suitable specials for KSEB service