PERIODICAL SERVICES INCL WELCOME MAINTENANCE REPAIR TO PLASTERING, PLINTH PROTECTION, KITCHEN CABINET AND CERTAIN B/R WORKS AT TECHNICAL AND RESIDENTIAL AREA OF ITM MUSSOORIE UNDER GE(I) RND DEHRADUN

Amount

M&L for polished granite stone slab single piece as in kitchen platform, window cill, steps and similar work including necessary bulk nosing as required 16 to 18mm thick machine cut, rounding edges and polishing, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigemnt to match the shade of granite stone including grinding and polishing, over 15 mm thick screed bed bedding in CM (1:4) with and including making hole for gas pipe with and including dismenting of old stone slab complete all as specified and directed.

M&L for Roughening surfaces of old concrete/ brick surfaces by picking, sweeping clean and washing down with water to remove dust etc and waterproffing treatment to sunkin portion of WC, bathroom etc by applying cement slurry mixed with Acrylic Based Polymer modified cementation composited compound coating as under :- First layer of cement @ of 0.488 kg per sqmtr mixed with Acrylic Based Polymer modified cementation composited compound @ 0.253 kg per sqmtr. This layer will be allowed to air cure fro 4 hours and second layer of slurry of cement @ 0.242 kg per sqmtr mixed with Acrylic Based Polymer modified cementation composited compound @ 0.126 kg per sqmtr and allowed to be air cure for 4 hours including preparation of surfaces treated and sealing all joints , corner , juncation , pipes and masonory with Polymenr mixed slurry joints, corner, juncation , pipes and masonry with Polymer mixed slurry . Note:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorized applicator of manufacturer approved by GE.

Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground level complete all as specified and directed

M&L for 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in sunken floor finished even and smooth using extra cement with using water proofing compound as per manufacturer's instructions complete all as specified and directed Note:- Water proofing compound shall be measured and paid seperately under respective item of Schedule 'A'/BOQ.

M & L for providing plain cement concrete, type E-2, 1:5:10 (using 40 mm graded stone aggregate) as in sunken, filling and mass concrete complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300 mm x 450 mm x 7mm / 350 mm x 450 mm x 7mm / 250 mm x 250 mm x 7mm thick as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tilescomplete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Taking down shutter exc. 1 Sqm and n.exc 2 Sqm each and refixing the same opening after resecuring or easing and adjusting shutters of any description. complete all as specified and directed.

Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each complete all as specified and directed

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm but n. exc. 4.00 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.

S&F 35mm thick second classs hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F factory made glazed and skelton shutters 35mm thick second class hard wood open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded,mitred and rebated sash bars, any numbers , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part-I 2009 section 8, clause 8.24 (a) complete all as specified and directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm wall nut colour PVC sheet reinforced with MS square tube as per specification, drawings and as specified in SSR Part-II 2020 complete all as specified and directed.

S&F Factory Made Solid PVC Moulded wall nut colour, door sutter, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design width 2 mm thick Moulded PVC sheet on the front & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed.

S&F 100 mm size mildsteel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150 mm size complete all as specified and directed.

S&F floor door stopper double leg of aluminium alloy body of 70 mm length with aluminium base plate of size 50 mm x 40mm complete all as specified & directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

S&F in reppair 150 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate including necessary welding if requried complete all as specified & directed.

S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet of approved pattern as per specification and drawing and including necessary beading in matching colour complete all as specified and directed.

S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet partitions/frame as per specification and drawing and necessary beading in matching colour complete all as specified and directed.

S&F 125 mm long hasp & staple safty type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed.

S&F brass handles, cast type, polished bright 100 mm size complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized steel wire staples complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.

S&F MS angle iron work as in door frame work conforming to Fe 290(Gde E-165) including tie rod, hinges including one shop of red oxide primer etc. complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.

M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M&L for 4 mm thick figured glass pin headed type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M & L for At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same etc. complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubing down with water etc, complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- (i) WPC shall be measured and paid for seprately as "supply only" under respective item of sch A/ BOQ.

Prepration of new plaster surfaces of wall/ ceilng and r applying TWO or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (without using extra cement complete all as specified and directed.

Prepration of new plaster surfaces of wall and applying two coat of oil emulsion distemper over a coat of alkali resistance primer complete all as specified and directed.

M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:3 finished even and smooth (without using extra cement) complete all as specified and directed.

Prepration of new plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.

M & L Preparation of old surfaces of walls, plastered on un plastered by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, removing all vegetation growth and trading oil and greasy spots and applying one coat of white wash on old white washed surfaces of walls complete all as specified and directed.

All as per item No 43 here in before but on Ceiling Surface, Complete all as specified and directed.

M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of distemper oil emulsion on old prepared surfaces of walls complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling, cornices etc by brooming down or steel wire brushing down scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of oil bound distemper complete all as specified and directed.

M&L 20 mm thick cement plaster on fair face of concrete surface including repair of doubing roof/chajja/facia surfaces in CM 1:3 finished even and smooth without using extra cement mix with liquid water proofing compund complete all as specified and directed. (Liquid Water proofing compound shall be measured and paid separately )

M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing of new or previously untreated steel surfaces over 10cm width or girth and applying two coat of synthetic enamel paint on steel surfaces over red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces over 10cm width or girth and making good with & including by necessary red lead putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing of old painted wooden surfaces over 10cm width or girth and making good including knotting and stopping,cleaning etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including removing WC outside MOD Land complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) & including CI trap & connecting fitting as required set in plain cement concrete (1:3:6) type C-1 and connecting to flusing cistern and trap & connecting fittings as required and making good to floor with and including removing WC outside MOD Land complete all as specified and directed.

S&F in repair Kitchen Plate rack with & including shelves and hanging arrangements for utensil for kitchen , made of stainless steel sheet 0.63 mm thick ,size 900 mm x 600mm x 250mm complete all as specified and directed. Cat part No:-. KPR-311 of Make Blue Star or other equivalent make of pryag / Nirali complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. Cat part No:-. BSSBSD-52 of Make Blue Star or other equivalent make of pryag / Nirali complete all as specified and directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repair bib cock long body with flange , fancy type, brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or GI socket complete all as specified and directed.

S&F in repair fancy type angle cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair fancy type, stop cock regular body 15 mm nominal bore with flange, brass, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or GI socket complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make Prayag or other equivalent makes model in specified makes as approved by GE.

S&F in repair 125 mm size chromium plated brass shower rose with swivel joints and swivel arms for fixing with 15 mm pipe complete all as specified and directed.

S&F in repair towel rail ,D type, brass, chromium plated,, fancy type, 60 cm long between flanges fixed with and including CP brass screws, rawl plug etc complete all as specified and directed.

S&F in repair Toilet Cabinet PVC /ABS body of size 350x450mmx125mm of approved quality Make Commander/Prayag or equivalent makes as approved by GE.

S&F in repair Chromium plated brass wall mixer 3-in-1 system fancy type with provision for both hand shower and overhead shower complete with wall Flange (without Hand & over head Shower) screwed down for 15 mm bore GI pipe complete all as specified and directed.

S&F in repair Chromium plated brass central hole Basin Mixer without Popup Waste system complete screwed down for 15 mm bore GI pipe complete all as specified and directed.

S&F in repair fancy type chromium plated health faucat with 1.50 metre long PVC tube cover CP flexible with wall hook suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. Make-Prayag or other equivalent makes as approved by GE.

S&F in repair 32 mm dia fancy type cutain rod of aluminium pipe powder coating with wooden finish including braket rings, fancy knob, curtal ring 08 Nos minimum including all fixiing arrangement complete all as specified and directed.

S&F 40 mm nominal bore of pipe for drain out pipe in sunken floors galvanised mild steel water tubing “medium grade” with and including all fitting (such as bends, elbows, tees, short pieces connectors, back nuts, diminishing pieces, capas, plugs and union etc) complete all as specified and directed.

S&F in repair PVC (SWR) pipes 150 mm,single socketed in any length with rubber ring joints fixed to walls with M S claimps complete all as specified and directed

S&F in repair PVC (SWR) bends any radius for 150 mm bore of pipe complete all as specified and directed

S&F in repair PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, fixed to walls with M S clamps complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius, with access door, for 110 mm bore of pipe complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius, with access door, for 75 mm bore of pipe complete all as specified and directed.

S&F in repair PVC (SWR) junction, with access door, single (single T) equal or unequal, for 110 mm bore of pipe complete all as specified and directed

S&F in repair PVC (SWR) junction, with access door, single (single T) equal or unequal, for 75 mm bore of pipe complete all as specified and directed

S&F in repair PVC (SWR) floor trap, plain / multi with grating including jointing with solvent cement, for 75 mm dia of outlet complete all as specified and directed

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as specified and directed

20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as specified and directed

M&L for Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipes etc and making good cutting not exc 10cm.complete all as specified and directed.

Disconnecting & taking down existing water tank of capacity exc 250 litres and not exc. 500 litres and removing from site complete S&F rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted with and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I complete all as specified and directed.

Repairs to leaking water in pillar tap, stop cock, angle valve, bib taps of any description by replacing the washer complete all as specified and as directed.

S&F in repair Ball valve of PVC for PVC low level flushing cisterncomplete all as specified and as directed.

S&F in repair PVC handle for low level flushing cistern, complete all as specified and as directed.

Repair/adjustment to washer/ siphon etc for high or low level flushing cistern any type any make including replacement of washer, check nuts, plug etc and making it functional complete all as specified and as directed.

S&F in repair Galvanised iron medium grade fittings as under for 15mm bore pipe :-

Union

Long screw

S&F in repair Galvanised iron medium grade fittings as under for 20mm bore pipe :-

Union

Long screw

S&F in repair Internal fittings complete including handle for PVC low level flushing cistern, complete all as specified and as directed.

S&F in repair PVC flush pipe 32 mm dia for low level flushing cistern, complete all as specified and as directed.

S&F in repair Mild Steel CP hinging device for plastic seat cover of EWC,complete all as specified and as directed.

S&F Grating doom 125mm dia with waste hole of PTMT fixed on floor/nahani trap with cement mortar, fixed in repairs complete all as specified and as directed. (Minimum weight 40 gms)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing with and including removing Debris out sideMOD Land at contractor is own arrangement complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia, suitable for WHB /Sink with cup, complete all as specified and as directed.

S&F in repair PVC waste pipe 40mm dia, suitable for WHB/Sink with cup, complete all as specified and as directed.

S&F for Stainless steel waste coupling for S.S Sink 75mm to 100mm dia set with rubber washer plug etc complete all as specified and as directed.

S&Fin repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and as directed.

S&F Door closer hydraulically regulated, aluminium body, designation No.3, universal type, suitable for door shutters of weight between 61 to 80 Kg, fixed in repairs complete all as specified and directed.

S&F aluminium sliding door bolt clip type size 300mm long, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F Sheet glass 5mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F in repair MS chromium plated bracket holder for curtain rods 20mm dia fixed with screws to pelmet boxes complete all as specified and directed.

S&F in repair 20mm dia mild steel pipe chromium plated for curtain rods with bracket and end piece fixed in repairs complete all as specified and directed.

S&F in repair Galvanised iron medium grade reducer socket 25 x 15mm,complete all as specified and directed.

Fixing only in repairs loose existing pelmets boxes by embedding wooden gutties in cement mortar 1:3 with MS clips and screws etc (length of pelmets box n.exc 1.5 M) complete all as specified and directed.

S&F magnetic ball catcher complete all as specified and directed.

S&F 1 brass 2 lever lock of 50 mm size complete all as specified and directed.

M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of acrylic plastic emulsion paint on old prepared surfaces of walls complete all as specified and directed.

All as per item No 118 here in before but on Ceiling Surface, Complete all as specified and directed.

M&L for complete removal of existing treatement by scraping, washing, rubbing down or stopping distempered or painted surfaces etc of walls plastered or un-plastered & removing all vegetation growth, cleaning & applying of Birla/JK white wall putty approx 1 mm thick in two layer as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of weather proof exterior paint silicon based on over coat of primmer old decorated surfaces of walls complete all as specified and directed.

M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of cement based paint on old prepared surfaces of walls complete all as specified and directed.

Providing & fixing in repair false ceiling at all heights with perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge.

S&F in repair spindles for 15mm brass or CP brass stop cocks, bib taps etc, fix in repairs complete all as specified and directed.

KISHORE ENTERPRISES (BID ID -3342421)

Ram Naresh Singh Sikarwar (BID ID -3348606)