REPAIRS TO DRAIN BOUNDARY WALL FENCING AND HARDSTANDING IN MES IB UNDER AGE BR (N) NO II OF GE (N) SECUNDERABAD

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in Concrete, brick work, masonry, etc. , including taking out embedded portion and making good disturbed ground and removal of rubbish/ demolished materials out side of MD land complete all as specified and directed.

M&L Providing PCC (1:3:6) type C2 using (40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed..

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron, fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size, rails, straining bolts, etc. including provision of binding wire. (Chain link fencing and line wire shall be paid at supplied only rate) complete all as specified and directed.

Supply only mild steel galvanised chain link fencing of any size or type complete all as specified and as directed

S&F Chain link MS galvanisd fencing Chain link fencing of mesh size 75x75mm , diameter of wire not less than 3 mm thick complete all as specified and directed.

M&L Preparation of new iron and steel surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L MS round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with MS wire 0.9 mm dia annealed all as specified confirming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, ach screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n exc 10cm long complete all as specified and directed.

M&L Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing and tying at crossings with and provisions of galvanised mild steel wire staple or steel pins etc complete all as specified and directed.

M&L Preparation of new iron and steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down barbed wire any specification complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish/ demolished materials out side of MD land complete all as specified and directed.

M&L 75 mm thick PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate), as in sub base for floor, finished even and rough complete all as specified and directed.

M&L Screed bed or bedding layer of 15mm thick CM (1:6) for laying floor finishes complete all as specified and directed.

M&L Chequered cement concrete tiles of size 250mm x 250mmx 25mm thick, as in floors,set jointed and pointed in cement slurry with grey cement and pigments complete all as specified and directed.

M&L Vitrified tiles (Durastone / Endura) heavy duty not less than 12mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.16 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L Sand filling under floors/paver blocks or in foundations including filling the joints with sand as in floors/ paths including watering and consolidation complete all as specified and directed.

M&L 60 mm thick, machine made, 1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles, of triangular / Zigzag / Haxagone/ I , in shape or shap and designe as approved, with grey cement and pigment, having crushing strength not less than 300 Kg / Sqcm and conforming to IS specifications,complete all as specified and directed.

M&L 80 mm thick, machine made, 1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles, of triangular / Zigzag / Haxagone/ I , in shape or shap and designe as approved, with grey cement and pigment, having crushing strength not less than 300 Kg / Sqcm and conforming to IS specifications complete all as specified and directed.

M&L Scrapping and removing old paint, stains, loose materials and algae-fungus growth then cleaning of surface with water using pressure washer machine, fill the crack with acrylic based textured cack filler and applying two coats of modified acrylic exterior emulsion paint of approved shade having silicon additives in paint over and including a coat of primero-primer cum sealer having alkali resistance property diluted with water complete all as specified and as directed.

M&L Cleaning thoroughly the existing white wash/cement base paint surface with water using pressure washer machine, fill the crack with acrylic based textured cack filler and applying one coat of modified first quality acrylic exterior emulsion paint over and including a coat of primer of approved shade having silicon additives complete all as specified and as directed.

Taking down cement plaster on brick walls incl raking out joints hacking for key scrubbing down with water etc. and removal of rubbish/ demolished materials out side of MD land complete all as specified and directed.

M&L Rendering 15 mm thick CM (1:4) on brick masonry or concrete surface, including finished the surface smooth and even without using extra cement complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry / Block masonry, built in cement mortar including facing, dressed stone work and precast concrete all quoins, arches, pillars, coping etc but excluding ashlars articles including removal of rubbish/ demolished materials out of MD land complete all as specified and as directed by Engineer-in-Charge.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in and set and jointed in CM (1:6) complete all as specified and directed.

Demolition of precast concrete block walling, built in cement mortar including all quoins, arches, pillars etc and fixing only by using Precast solid cement concrete block masonry with using CM (1:6) complete all as specified and directed by Eng-in-charge. Note: All Serviceable PCC blocks shall be re-used obtains from demolition and cost of demolition of same deemed to be included in this item.

M&L Walling of squared rubble masonry regular coursed, Secunderabad and Bangalore types, well bonded, bedded and solidly hearted, built in CM ( 1:6) complete all as specified and as directed

M & L Raised pointing to random or polygonal rubble masonry uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or Pattern) including all fittings complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors/fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors/fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) junction single, (single T) equal or unequal for 110 mm bore pipes complete all as specified and as directed.

S&F PVC (SWR) junction single, (single T) equal or unequal for 75mm bore pipes with access door complete all as specified and as directed.

S&F PVC (SWR) floor trap, 75mm dia of outlet,plain with grating including joining with solvent cement complete all as specified and as directed.

S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) Vent cowl of 110mm bore complete all as specified and as directed

S&F 12mm thickness toughened glass factory made frosted with as in door/ wall partition including providing and fixing of top & bottom pivot & spring type fixing arrangements & necessary holes & making good & required hinges,SS 304 grade handles,door/floor spring etc and including all necesaary fittings complete all as specified and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed

S & F 5mm thick Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site including removing of existing sheet if any complete all as specified and directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Providing suspended false ceiling system by using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross 'T' 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 8mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips all as specifed and directed by Engineer- in -charge. Make:-Gyproc/Armstrong.

M&L Providing plaster of paris sheets false ceiling with 600 X 900 X 10 mm thick, sheet fixed with machine screws on and including grid system of GI channel 18 gauge thick, main joist placed at 750mm centers, secondary joists placed at 450 mm centers, GI angle suspenders from roof and treating the plaster of Paris sheets with thin layer of POP with gypsum binder, sanding the surfaces till smooth surfaces is obtained and finally applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting of any gauge and any thickness including naintal or similar pattern AC sheet roof coverings, etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

Dismantling structural steel work of any description and in any position including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F Roof trusses (framed) trusses purlins and fastening (etc.,angle, channel,tubular section,round pipe) or flat section including distance pieces, MS plates/ gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L 35 mm thick (measured solid) Precast cement concrete louvers/jallies,jafri wall with PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) including moulding and fixing of any type and set in CM (1:4) complete all as specified and directed.

M&L Preparation of old kerb stone surfaces and applying two coats of synthetic enamel paint over and including a coat of primer complete all as specified and directed.

S & F 2mm thick Fibre glass reinforced translucent plain sheeting with side lap fixed with coach screw and washer in roof, wall,gate etc complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L Framed work such as grills, gratings, Gates etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and ornamental and intricate design conforming to Fe.290.Gde-E-165 complete all as specified and directed.