Providing additional decorative lighting systems to MIG flight area

Amount

WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

MV CABLE LAYING

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Removing:Upto 35 sq. mm

MV CABLE JOINTING & END TERMINATION

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 16 sq. mm (28mm)

POLE ERECTION

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Providing pole foundation for 2-4 Meter decorative garden pole of steel fabrication with 4Nos of 10mm and 7Nos of 8mm steel bars with 300x300mm rectangle shape centring works and Erection with size of 400mmx 400mmx850mm length including with M-20 concrete 150mm projection from the ground level including required excavation etc. as required.

Dismantling of bollard light fitting with GI cable looping box including demolishing of concrete (which is erected 300-400mm length of RCC) with necessary arrangement etc. as required.

Erection of GI round cable looping box with necessary M20 concreate size of 300mmx350mm depth etc. as required. (the above dismantled cable looping box has to be erected in the different areas).

MISC. CIVIL ITEMS

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

FIRE DETECTION AND ALARM SYSTEM

Manufacturing, Supply and Installation of Octagonal /GI type wall street light bracket made of approved type and design with 500 mm overhanging from street light pole painting & not less than 9 Kg with one coat of Anti-corrosive Primer and two or more coats of automobile grade metallic paint of approved brand and shade, etc as reqd.

Supply of double brackets 500mm height and 1000mm long in each side for pole having top 70mm A/F etc as required.

SUPPLY OF GARDEN LIGHT POLE

Supply and installation of decorative garden post with height of 2440mm and dia 60.3mm and bottom dia 139.7mm including base plate with the size of 200mmx200mmx 8mm thick. 4 elongated hole (38x19) to suit for M16 bolt at CC of 140mm & cable entry hole 70mm and 4Nos of 300mm length “J” type bolt with 2Nos of plain washer & 2Nos of M16Nuts each with necessary elmax connector block and internal wiring etc. as required. (K-Lite: KP-4280)

Supplying of Cables.

Supplying of following size ISI marked PVC insulated and PVC sheathed aluminium grade w i t h a r m o u r e d a s r e q u i r e d . (Make:Finolex,Gloster,Polycab and Havells with 18 months warranty from the date of supply)

4x16 sq mm

Supply of Light Fixtures with Lamps

Supply and fixing of outdoor decorative light fittings LED/MH/CFL post top made in cast aluminium spigot housing with decorative clear acrylic diffuser and IP65 protection. ( Make: Bajaj/Phlips/Crompton)

30W LED post top luminaries die cast aluminium spigot base with aluminium alloy with size of dia 514mm x height 380mm with IP54 protections and necessary connections etc. as required. (Make: K-Lite 4976 Avira, Philips, Bajaj)

Supply, installation, testing and commissioning of 12W 4way spot type (CDB) LED outdoor type wall light with IP44 and CRI 80 class I protection with necessary arrangement etc. as required.

Supplying and fixing street light luminaire with die cast aluminum housing and toughened glass cover with min IP65 protection , with the LED Type fixtures of following Wattage complete with all accessories and drivers, LN6 heat sink minimum 5kVA surge protection low power LEDs with driving current less than 350mA etc. on existing brackets on street light poles including connection & loop earthing with 3 core 1.5 sqmm flexible PVC insulated PVC round sheathed copper conductor cable from street light box to fitting, testing and commissioning etc. as required. (with 5 years manufacturer's warranty) (Make: Havells,

LED 45W white colour lamp.

Cable adaptor box.

Supplying and fixing of adaptor box size : 400mm x 450mm x 300mm deep etc.,as required.

POWERTECH ENTERPRISES

POWER ELECTRICAL WORKS

Power Point