REPAIR AND REPLACEMENT OF JOINERY PLASTERING PLUMBING AND MISC WORKIN IN ZONE C AREA AND OTHER LOCATION AT MILY STN RAIWALA UNDER AGE(I) RAIWALA

Amount

Taking down chowkhats or frames n.exc 1.50 sqm each, including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing to or from store, or otherwise as directed complete all as specified.

Taking down chowkhats or frames exc 1.50 Sqm but n .exc 4 Sqm each, removing to or from store, including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing to or from store,or otherwise as directed complete all as specified..

Refixing wooden shutters (including taking down) of any description in same opening n.exc 1 Sqm each,removing to or from store.

Refixing wooden shutters (including taking down) of any description in same opening exc 1.00 Sqm but n.exc 2.00 Sqm each,removing to or from store.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old of any description any girth, treating ends of posts, back of chowkhats,etc., area tarred exc 0.10 sqm but n exc 0.50 sqm each treated with tar or coal tar black paint.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old of any description any girth, not otherwise described, and treated with tar or coal tar black paint.

M&L for treating small articles such as stop, covers,gully gratings, hold fasts, end of posts, backs of chowkhats, etc., area tarred n.exc 0.10 sqm each treated with tar or coal tar black paint.

S&F mild steel work as in hlod fast for securing chowkhats etc,including bolts if required; wall ties hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters;knee piece inserts; two way and three way starps, plate washers and similar small article confirming to F-290 Gde-E-165.

S&F for IInd class HW plain, solid, stright chowkhats and frames,wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing to or from store, or otherwise as directed complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm but n.exc 4 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing to or from store, or otherwise as directed complete all as specified.

Taking down shutters of any description not exc 1 sqm each including removing to or from store or otherwise as directed complete all as specified.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each including removing to or from store or otherwise as directed complete all as specified.

Resecuring or easing and adjusting without taking down of shutters of any description n.exc 1.00 sqm each.

Resecuring or easing and adjusting without taking down of shutters of any description .exc 1.00 but n.exc 2.00 sqm each.

M&L for pressed steel frame made of 1.25 mm thick MS sheet of profile 75X50 mm for door and window CB frames with one rebate including lock strike plate, shock absorber, 20mm dia 60 mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar back paint, including hinges, hold fasts/lugs . all as specified and directed

S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS coduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint complete as per IS-4351.

S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (125X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS coduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint complete as per IS-4351.

S&F steel windows with side hung shutters including projecting type hinges, with steel handle & steel peg stay complete with glazing bars dovetailed or welded

S&F steel windows with side hung shutters including projecting type hinges, with steel handle & steel peg stay complete without glazing bars dovetailed or welded

S&F steel ventilator with top hung shutters including higes steel peg stay complete.

S&F framed work such as grills,gratings etc with end of bars shouldered and/ or riveted,or forged into spikes; framed guard bars;barred iron doors;ladders; framed balusters; walk ways;railings; frame work of water tanks and similar work con-forming to Fe-290.Gde-E-165

M&L for PCC (1:3:6) type C0 using 12.5 mm graded crushed stone aggt.as in filling steel frames etc including necessary form work complete all as specified.

M&L for PCC (1:2:4) type B1 with using 20 mm graded crushed stone aggt as in bed block hold fast block all as specified .

S & F 35mm thick IInd class HW factory made, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and styles as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated as per IS-1003 -1987.including moulding beads is provided and planted round the panels botth sides .All as specified and directed .

S&F Factory made 35 mm thick,2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc , size of members of shutters as specified in SSR part-I section 8, clause 8.20 (a) of MES Schedule Part-I ,complete all as specified.

S&F Factory made 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc divided into squares with plain, chamfered or rounded, mitered and rebated sash bars any number, size of members of shutters as specified in clause 8.20(b) of SSR part I and fitted to chowkhats complete all as specified and directed.

S&F 75 mm butt hinges,medium weight,cold rolled mild steel.

S&F100 mm aluminium anodised barrel tower bolts of extuded sec.

S&F100 mm aluminium handels, cast type, anodised.

S&F mild steel butt hinges, 100 mm long, medium weight, cold rolled mild steel, complete all as specified.

S&F in repair mild steel butt hinges, 100 mm long, medium weight, cold rolled mild steel, complete all as specified.

S&F 200 mm aluminium anodised, barrel tower bolts of extruded section.

S&F in repair 200 mm aluminium anodised, barrel tower bolts of extruded section.

S&F 125 mm aluminium handels, cast type anodised.

S&F in repair 125 mm aluminium handels, cast type anodised.

S& F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified.

S&F in repair Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified..

S&F 300 mm,mild steel ordinary rat tail rod pattern springs including roller and roller plate including fabrication to steel frame etc complete all as spcd.

S&F in repair 300 mm,mild steel ordinary rat tail rod pattern springs including roller and roller plate including fabrication to steel frame etc complete all as spcd.

S&F small fittings of 2nd class hard wood (Hollock), (Sheesham wood may be used without financial adjustment ), such as brackets of any type latch and hinge blocks shaped door and and window stops and the likes,including all necessary labours; articles not exc 200cm.cm each and fixed with steel screws in steel frames complete all as specified.

S&F Factory made Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; on either side & as gap insert for top rail;panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement complete all as specified.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face all as specified.

S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified.

S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified. Make: Prayag/Polytuf.

S&Fstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture not more than 1.40 mm and fixed with stainless steel wire staples complete all as specified.

S&F 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work, as in CB shutters,CB shelves, Pelmet Boxes etc external teeak wood lapping if required 6 mm thick fixed with nails all as specified.

S&F in repair 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture not more than 1.40 mm and fixed with stainless steel wire staples complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concret or brick surrounds, glazed with putty or fixed with beads complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. glazed with putty or fixed with beads complete all as specified

S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads in squares n.exc 0.50 Sqm complete all as specified.

S&F 4.00 mm thick figured glass pin headed type, and glazing with oil putty in square n exc 0.50 Sqm in each pane.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of Old wooden surfaces of any description, over 10 cm width or girth,not otherwise describe and applying one coat of synthetic enamel paint.

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint including one coat of redoxide primer complete all as specified

M&L for preparation of old steel surfaces of any description, over 10 cm width or girth not otherwise describedand applying one coats of synthetic enamel paint complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) removing seviceable tiles to store and rubbish off the premises all as directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300X200X7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces walls all as specified.

M & L for Non skid ceramic coloured tiles7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but nexc 0.18 Sqm,in vertical surfaces such as dados, skirting etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces all as specified. .

Demolition of (un -reinforced) cement concrete in ground floor and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specifide.

M&L for joint free Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.11 Sqm but nexc 0.18 sqm,in floor etc. set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 15 mm thick screed bed in cement mortar (1:6) all as specified.

M&L for Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 15 mm thick screed bed in cement mortar (1:6) all as specified..

M&L for 75 mm thick PCC (1:5:10) type E2 withusing 40 mm graded crushed stone aggt as in sub base of floor etc finished cement concrete durfaces rough to receive the floor layer all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B1 with using 20 mm graded stone aggt as in flooring ,including brushig neat cement slurry with 3.0 Kg/Sqm, cement concrete surfaces finished even and smooth without using extra cement all as specified and directed.

Supply only Glass dividing strips 3 mm thick 38 mm width laying in floor etc; complete all as specified.

Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as directed.

Taking down 20 mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as directed.

S&F 15 mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

S&F 20 mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

Fixing only 15 mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

Fixing only 20 mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

S&F as in repair 10ltrs capacity PVC syphonic action type cistern low level white, incl flush pipe inlet ball valve, float and handle and bracket etc, connecting to water pipe, brass CP stove valve, 15 mm PVC connection 450 mm long, complete all as specified & directed.

S&F Vitreous china squatting pan,' Orissa' pattern, size 580x440mm white with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, complete including making good to floor all as specified.

S&F in repairs viterious china wash basin,white flat back,size (450X300) mm including 15 mm brass CP Pillor taps,waste coupling PTMT 32 mm,, brass CP stove valve15 mm, low density polylethylene pipes (LDPE) 32 mm dia 80 cm long, PVC conection 15 mm dia 450 mm long, and bracket complete all as specified.

S&F in repair 15 mm bore Bip tap cast copper alloy fancy type chomium plated with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule.

S&F in repair stop cock 15 mm cast copper alloy facy type cromium plate screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc.

S&F in repairs stove valve 15 mm dia cast copper alloy chromium plated with long shank and cup (Concealed type) screwed down high pressure with cruth or butterfly handle, screwed both end for iron pipe or for unions.

S&F in repair stop cock ,20 mm cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union etc.

S&F in repairs15 ball valves, high pressure of PTMT with epoxy coated aluminium road and high density plastic ball, screwed for iron pipe(Min wt. 142 gms)

S&F in repairs 20 ball valve, high pressure of PTMT with epoxy coated aluminium road and high density plastic ball, screwed for iron pipe(Min wt. 210 gms)

S&F in repairs 15 mm pillor taps, cast copper alloy, with capastan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or'Cold' with long screwed shanks and fly nuts, screwed for iron pipe

Alankar Traders

AMARJEET SINGH AND CO.

A ONE BUILDERS AND ENGINEERS

RAJENDER CONSTRUCTION CO

RAMAN CONSTRUCTION CO.

TARUN ENGINEERING WORKS