R. R. work to the Type-C (Block 3 to 6,12,14,15) total 42 Nos. Flats at R.H.E. Pilkhana Jalpaiguri with necessary Wood, Cementing, Painting, Flooring Works etc. and allied S and P Works for the Internal and External pipe lines etc. under Siliguri Div

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) (a) Upto area 2.5 Sq.m

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals). (a) Sal : Siliguri.

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

Renewing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete (1:2:4) including cutting of brick work/concrete work as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 125mm Length

Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts), reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item, payment under item 73 will be made once only).

Styles and rails of wooden shutters fitted and fixed complete. (Payment to be made on area of new work only). In Ground Floor: (i) 35mm Thick shutter. (a) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

Panel (made of single plank) of door and window shutters to design as directed: In Ground Floor (Payment to be made on area of exposed new work). (In case of non-supply of single plank penal rate of reduction to a maximum of 30% will be made). (i) 19mm thick panel of 30cm to 45cm width (a) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

Glazed shutters of doors, windows, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. 3mm. Thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but excluding the cost of hinges and other fittings. cost of glass, putty, wooded beads etc.will be paid separately. In ground floor. (i) 35mm thick shutters. (a) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

Easing door and windows.

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) (i) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. (a) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

Shutters of 2/3rd panel and 1/3rd glazed of doors and windows as per design (each panel consisting of a single plank without joint and with ordinary glass of 7.4kg. Per sq.m./3mm thick) fitted with putty bed and teak wood beads and nails including fitting and fixing shutters in position but excluding the cost of glass, putty, teak bead, nails, hinges etc. and other fittings, in ground floor. (i) 35mm thick shutters with 19mm thick panel. (a) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.

(i) 100mm. X 50mm. X 1.25mm.

(ii) 75mm. X 40mm. X 1.12mm.

Iron socket bolt of approved quality fitted and fixed complete.

(a) 150mm long x 10mm dia bolt.

(b) 100mm long x 10mm dia bolt.

Iron door handle of approved quality fitted and fixed complete: (i) 150mm x 5.5mm.

Iron door ring of approved quality fitted and fixed with nut and washer complete. (i) 50mm dia.

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m)

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Taking out M.S. or W.I. Grills from wooden frame including cutting lugs from masonry wall and refitting the same and mending good damages after repairs. (Excluding the cost of necessary repair of damages) or doing any other necessary works.

Easing and oiling W.I. Gate or G.I. Gate.

Repairs to roof cracks with cement and sand mortar (1:4) including cutting grooves and cleaning cracks and grouting the cracks with neat cement before repairs. (Cement 0.63 Kg/Mtr.)

Filling up cracks with cement mortar (1:3) at the junction of the out side wall and drain. (Cement 11.4 Kg/100 Mtr.)

Regrading mouth of down pipe for easy out let of rain water including cement plaster (1:3) including cutting slope and mending damages. (Cement 57.0 Kg/100 Nos)

Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor. (a) Slab Thickness 20 to 25 mm

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile above 0.09 Sq.m (i) Coloured decorative

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colour

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). a) In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength > 1200 N

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

Scraping and removing greasy soot from walls or ceiling of kitchen or similar smoke affected rooms and preparing the surface.

Supplying, fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs.

a) with 50mm iron Butt-hinge i) Local Sal.

b) with 75mm iron Butt-hinge i) Local Sal.

Iron catch hook of approved quality fitted and fixed to shutter and chowkat. (a) 6mm dia x 100mm long.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod) (i) 100 mm grip x 10 mm dia rod.

Taking out old iron higes and fitting, fixing the same with new steel screws.

(a) 50mm. Long butt hinge.

(e) 100mm. Long butt hinge.

Renewing 125mm long wooden buffer block i) With Sal : Siliguri.

M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm)

Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge.

Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge. a) 25 mm thick

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

(1) With 1:6 cement mortar (a) 15 mm thick plaster (i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

(iv) In Third Floor

(b) 20 mm thick plaster (i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

(2) With 1:4 cement mortar (a) 10 mm thick plaster (i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

Renewing throating, nosing or drip course moulding with 15 mm. thick cement plaster (1:4) complete. (Cement 0.7Kg/Mtr.) In ground floor.

Concrete chowkat with rabbet (in sill of door or window) made with cement concrete (1:2:4) and finished with 15 mm. thick cement plaster (1:4) and neat cement punning complete. In ground floor. (i) With rabbet on one side (a) 75mm. x 50mm. or 75mm. x 75mm. sec (Cement 3.7Kg/Mtr.)

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (i) 25 mm. thick

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

White washing including cleaning and smoothening surface thoroughly. All floors : (a) Two coats (to be done on specific instruction).

Colour washing with "ELLA" with a coat of white wash priming including cleaning and smoothening surface thoroughly : (i) Internal (all floors) (a) Two coats

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :

(a) On timber or plastered surface : With super gloss (hi-gloss) - (i) Two coats (with any shade except white)

(b) On steel or other metal surface : With super gloss (hi-gloss) - (i) Two coats (with any shade except white)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

(iv) In Third Floor

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Premium 100% Acrylic Emulsion

(i) In Ground Floor

(ii) In First Floor

(iii) In Second Floor

(iv) In Third Floor

Taking out rain water down pipe.

Dismantling H.C.I. pipe with fittings including melting lead caulked joints. (i) 100 mm

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992

(A) Single Socketed 3 Meter Length (i) 75 mm

(B) Single Socketed 1.8 Meter Length (i) 75 mm

(C) Double Socketed 1.2 Meter Length (i) 75 mm

(D) Double Socketed 0.60 Meter Length (i) 110 mm

Fittings (1) Door Tee (a) 75 mm

(2) Door Bend (T.S.) (a) 110 mm

(3) Cross Tee with Door (a) 110 mm

(4) Vent Cowl (a) 110 mm

(5) W.C. Connector (150 mm long) 125 X 110(W/WC Ring) (a) 75 mm

(6) 110 X 110 P Trap (a) 75 mm

(7) Rubber Ring (a) 75 mm

(8) Pipe Clip (a) 75 mm

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches up to 1.5 metre and refilling the same complete as per direction of the Engineer- in-charge. (Payment will be made on centre line measurement of the total pipeline including specials).

(A) Above ground (a) 75 mm Dia

(b) 110 mm Dia

Foot rest for Indian pattern water closet. (a) Dismantling

Dismantling Indian W.C. including taking out base concrete as necessary.

Dismantling flush pipe of water closet.

Refixing flush pipe of water closet.

Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap (with vent)

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C. (i) Plastic (hallow type) white

Supplying, fitting and fixing low-down cistern parts. (i) Internal fittings for cistern complete of approved make.

Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (i) 600 mm long

Supplying, fitting and fixing bib cock or stop cock. (a) PTMT (Polytetra Bib Cock / Stop Cock (Prayag or equivalent) 15 mm

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (i) 1500 litre capacity

Labour for hoisting plastic water storage tank.

(i) Upto 1500 litre capacity.

Upto 1500 litre capacity. (a) Upto 1st story from G.L. (i) Extra for each additional story

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the center line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made separately) (a) For Exposed Work PVC Pipes

(i) 40 mm dia

(ii) 25 mm dia

(iii) 20 mm dia

Ball Valve

(i) 40 mm dia

(ii) 25 mm dia

(iii) 20 mm dia

Dismantling sink with brackets with or without waste fittings. (i) Above 450 mm and upto 600 mm length

Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only (i) 530 mm X 430 mm x 180 mm

Sub Total

Sub Total + GST 18%

Please Enable Macros to View BoQ information