Nandghar

Name of work : Constructing Anganwadi At Village

BILL OF QUANTITIES

Item Description of Item (With brief specification and reference to Quantity Unit Rate Amount

No. book of Specification)

1 Excavation for foundation upto 1.5 m depth including 49.80 Cum. 203.83

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

2 Providing and laying cement concrete 1:4:8 (1 cement : 4 13.00 Cum. 2826.99

coarse sand : 8 B.T. machine crushed stone aggregates 40 mm

nominal size) and curing etc. complete excluding cost of form

work in foundation and plinth.

3 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 12.30 Cum. 4499.55

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in (A) Foundations, footings,

base of columns and

4 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 1.40 Cum. 7699.23

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Columns up to Plinth level.

5 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 5.10 Cum. 4408.65

using B.T. stone aggregate & curing complete including the

cost of form work but excluding the cost of reinforcement for

R.C.C. work in Ground Beam.

6 Filling available excavated earth (excluding rock) in trenches. 22.30 Cum. 130.39

plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidating each deposited layer by ramming and

7 Brick work using common burnt clay building bricks having 9.15 Cum. 4051.78

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)

8 Filling in foundation and plinth with murrum or selected soil 24.60 Cum. 282.02

in layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

9 Filling in plinth with sand under floors including watering 10.80 Cum. 424.90

ramming, consolidating and dressing complete

10 Carring out plinth treatment to post construction / existing 52.00 Sqmt 56.63

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As

Per 6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Item Description of Item (With brief specification andPage

2 to Quantity Unit Rate Amount

No. book of Specification)

11 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 3.85 Cum. 3631.49

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

and curing complete excluding cost of formwork in (A)

Foundation and Plinth

12 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 1.90 Cum. 7699.23

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in

Columns for all floor level.

13 Brick work using common burnt clay building bricks having 21.75 Cum. 4320.08

crushing strength not less than 35 kg/Sq.Cm. in

superstructure above plinth level upto floor two level in

Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional

brick etc. complete

14 Providing and laying cement concrete 1:3:6 (1-Cement : 3- 4.25 Cum. 3153.22

coarse sand : 6- B.T. machine crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

15 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 1.80 Cum. 6907.39

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Lintels for all floor level.

16 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 5.10 Cum. 6095.35

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Beams for all floor level.

17 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 6.50 Cum. 6392.29

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Slab for all floor level.

18 Providing TMT Bar FE 500D reinforcement for R.C.C. work 2850.00 Kg. 76.21

including bending, binding and placing in position complete

upto floor two level

19 Providing and fixing both sides polished machine cut kota 12.50 Sqmt. 615.09

stone shelves / partition of single piece (maximum 150 cm)

mm thick embedded into wall with groove in cement mortar

1:2 (1 cement : 2 fine sand), including racking and finishing

smooth the surface, including joined with grey cement,

rubbing, cutting the stone as and where required etc.

20 Providing 15mm thick cement plaster in single coat on Rough 126.00 Sqmt. 234.33

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) including finishing with

a floating coat of neat cement slurry for Ground Floor

Item Description of Item (With brief specification andPage

3 to Quantity Unit Rate Amount

No. book of Specification)

21 Providing 10 mm thick cement plaster in single coat on brick / 43.00 Sqmt. 211.74

concrete on ceilings and sofits of stairs for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) including finishing with

a floating coat of neat cement slurry Ground Floor

22 Providing 20mm thick cement plaster in single coat on single 180.00 Sqmt. 256.60

or half brick walls for interior plastering upto floor two level

and finished even and smooth in (i) Cement mortar 1:4 (1-

cement:4-sand) including finishing with a floating coat of neat

cement slurry for Ground Floor

23 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 65.30 Sqmt. 1204.20

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and

jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for light

24 Providing and laying Ceramic tiles 6mm thick in skrting risers 27.00 Sqmt. 975.13

of steps and dedo on 10mm thick cement plaster 1:3 (1-cement

: 3-coarse sand) and jointed with white cement slurry

25 Providing and laying Ceramic tiles 6mm thick in flooring 1.80 Sqmt. 944.91

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1- cement : 3-coarse sand ) finishing with

flush pointing in white cement.

26 Providing and fixing 18 mm thick mirror polished Granite 15.80 Sqmt. 2183.62

stone of machine cut & full round edge and polished of

approved quality in cladding on sill and around the Doors /

windows / ventilation with 20 mm thick cement plaster 1:3

and jointed with white / matching pigment cement slurry &

adhesive, including polishing & moulding of exposed edges

etc. complete for all floor level as directed by Engineer-in-

27 Constructing a Sandwich type cooking platform of 60 cm 3.80 Sqmt. 5436.83

width and 70 cm height resting with Granite polished stone

top and 100 mm height faces in exposed faces with 18 mm

thick of polished Granite stone of approved colour and quality

on 25 mm x 2 No polished Kota stone sandwich supports,

polished kota stone shelves and fixing stone using cement

mortar 1:2 (1 cement : 2 fine sand) for sandwich and fitting at

bottom & edges with water proof rigid adhesives, including

mocking necessary grooves in walls, polishing and making

edges etc. complete as directed by Engineer-in-charge. (Only

top clear area of platform shall be measured and paid

Item Description of Item (With brief specification andPage

4 to Quantity Unit Rate Amount

No. book of Specification)

28 Providing and fixing Stainless steel kitchen sink Glossy ASIS 1.00 No. 1173.78

304 grade and 1 mm thick with over all size 510 x 432 x 33 and

bowl size 455 x 368 x 190 mm of approved brand as directed

by Engineer-in-charge with all fittings like C.I. or M.S.

brackets painted white / or fixing on stone base, including

cutting holes and making good the same, 32 mm dia Brass

waste and M.I. fisher union fitting, including all necessary

fittings etc. complete.

29 Providing and fixing standared extruded of alluminium 0.40 Sqmt. 1175.56

section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/Rmt

with colour anodized alluminium frame for ventilation with

mm thick frosted glass as details etc complete for Ventilation

30 Providing and fixing extruded colour anodized aluminium 6.40 Sqmt. 3171.40

three track sliding window having aluminium section having

outer frame for bottom member of size 92.00 x 31.75 x

mm size weight of 1.07 KG / Rmt and outer frame for top

and sides members size 92.00 x 31.75 x 1.50 mm size weight

of 1.06 KG / Rmt, for shutters using top and bottom size 40 x

18 x 1.29 mm size weight 0.456 KG / Rmt & interlock member

size 40 x 18 x 1.29 mm size weight 0.456 KG / Rmt & handle

member size 40 x 18 x 1.29 mm size weight 0.456 KG / Rmt

with 5 mm thick transparent bronze colour tinted float glass

for shutter and fixing wire net shutter of Stainless Steel wire of

304- grade of IS Gauge designation 85-G with wire of 0-56 mm

diameter as a third sliding shutter with necessary fixtures and

fastening like rubber gasket and transparent silicon sealant

glass fixing to frame etc. complete as per drawing and

instruction of Engineer-in-charge.

31 Providing and fixing 35 mm thick shutter for door having 4.40 Sqmt. 4116.76

factory made solid core, melamine faced, three layered resin

flushed door of approved brand and manufacture, with 1 mm

thick decorative laminated sheet on both side with 6 mm thick

and 35 mm x 35 mm specially shaped moulded teak wood

beading fixed around the door with necessary fixtures and

fastenings like S.S. butt hinges, S.S. Aldrop, S.S. Handle size

cm long, stopper, door closers arrow type etc. complete as per

detail colour & pattern approved by Engineer- in-charge.

32 Providing and fixing M.S. plain Grills (Safety Grill) / Shutter 609.80 Kg. 101.48

of required pattern to wooden frames of window / Door etc.

with M.S. flats at required spacing and frame all-round square

or round bars with round handed bolts and nuts or by screws,

including primer coat of approved quality and two coats of oil

Item Description of Item (With brief specification andPage

5 to Quantity Unit Rate Amount

No. book of Specification)

33 Applying two coats of putty & two coats of primer of 126.00 Sqmt. 40.59

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and

sand papered smooth.

34 Wall painting (two coats) with plastic emulsion paint of 126.00 Sqmt. 78.90

approved brand and manufacture on undecorated wall

surface to give an even shade including thoroughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

35 Wall painting (two coats) with plastic emulsion paint of 43.00 Sqmt. 84.16

approved brand and manufacture on ceiling and sloping roofs

to give an even shade including thoroughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth.

36 Finishing wall with weather proof exterior emulsion paint on 180.00 Sqmt. 114.53

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials etc. complete

37 Providing and laying water proofing treatment on terrace 46.10 Sqmt. 1072.29

with broken China mosaic tiles flooring over average 40 mm

C.C. 1:2:4 bedding for maintaining slope for plain and curve

surface & 12 mm to 20 mm of broken piece of ceramic /

glazed tiles (one for more colour as directed) to be laid over

cement mortar bedding of C. M. 1:3 (1 cement : 3 sand) contain

one KG of water proofing materials per bag of OPC at plain or

/ and slops and to be tempered to bring mortar ceramic up to

surface with using white cement and colour pigment,

including rounding of junctions and extending them up to

cm along the wall and curing with bends any patterns or

design as per drawing and cleaning by using oxalic acid etc.

38 Providing and fixing water closet squatting pan (Indian type 1.00 No. 1394.81

W.C. pan) size 580 mm (Including 'P' or 'S' trap, foot rests and

excluding earthwork, bed concrete) Including providing and

fixing 100 mm size “P” or “S” trap for water closet squatting

pan including jointing the trap with the pan and soil in cement

mortar 1:1 (1 cement : 1 coarse sand) including P & F in

cement mortar 1:3 (1 cement : 3 coarse sand) A pair of white

vitreous china 250 mm x 130 mm x 30 mm foot rest for long

pattern squatting pan water closet, including P & F G.I. inlet

connection for flush pipe with W.C. pan (A) Vitreous china -

(i) Long pattern-white colour.

Item Description of Item (With brief specification andPage

6 to Quantity Unit Rate Amount

No. book of Specification)

39 Providing and fixing Wash basin with single hole for pillar 1.00 No. 2075.55

tape with C.I. or M.S. brackets painted white including cutting

holes and making good the same but excluding fittings. (A)

vitreous china : (ii) Flat back wash basin 550 mm x 400 mm

size, (i) in white colour, including fixing 32 mm dia C.P. Brass

waste pipe, 32 mm dia M. I. Fisher union, 15 mm dia stop tap

and 15 mm dia capstan head pillar tap, screw down high

pressure with screws shanks and back nuts & inlet & outlet

connections for wash basin etc. complete.

40 Providing erecting and fixing double coated ISI water tank of 1000.00 Ltr. 3.95

required capacity each with all necessary fittings and

connection etc. complete on terrace

41 Providing and fixing screw down bib taps of following size.(B) 3.00 No. 186.83

Brass chromium plated screws down Bib Tap. (i) 15mm dia.

42 Providing and fixing concealed Cock of premium make with 1.00 No. 808.00

necessary other materials and piping connections etc.

complete as directed by Engineer-in-charge.

43 Providing and fixing Angle Cock of premium make with 2.00 No. 606.00

necessary other materials and piping connections etc.

complete as directed by Engineer-in-charge.

44 Providing and fixing C.P. brass towel rail complete with C.P. 1.00 No. 603.19

brass brackets fixed to wooden plugs with C.P. brass

screws.(B) 600mm x 20mm size.

45 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 1.00 No. 558.36

100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I scread down or hinged

grating including the cost of cutting and making good the

46 Providing and fixing 600mm x 450mm bevelled edge mirror of 1.00 No. 833.73

superior glass mounted on 6mm thick A.C. sheet or plywood

sheet and fixing to wooden plug with C.P. brass screws and

47 Constructing brick masonry chamber for underground C.I. 1.00 No. 3660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm and 450mm

deep for pipe line with one or two inlets.

48 Providing and fixing S.W. gully trap with C.I. grating brick 2.00 No. 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i) Square

mouth traps.(B) 150mm x 100mm size P or R type

Item Description of Item (With brief specification andPage

7 to Quantity Unit Rate Amount

No. book of Specification)

49 Providing and Fixing PVC Spigot and Socket Soil waste and 15.00 Rmt. 277.43

Ventilating Pipe of the following nominal size 75 mm dia.

50 Providing and Fixing P.V.C. Spigot and Socket Soil waste and 10.00 Rmt. 336.24

Ventilating Pipe of the following nominal size 110 mm dia.

51 Providing and fixing M.S. fan clamps type 1 of 4.00 No. 125.99

16 mm. dia M.S. bar bent to shape with hooked ends to R.C.C.

slabs during laying including painting the exposed portion of

the loops all as per standard design complete.

52 Providing laying and jointing in true line and level 15mm dia. 30.00 Rmt. 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

53 Providing laying and jointing in true line and level 25mm dia. 20.00 Rmt. 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

54 Providing Sock well of inside Dimension 3.00 mt. Deep & 2.00 1.00 No. 41849.55

mt. Dia. Incl. Excavation, honey comb masonary work in C.M.

1:6 incl. Covering the top with slab and providing mainhole

cover incl. Providing vatas and curing etc. complete..

55 Constg Septic tank Including Excavation, B.B.C.C. 1:5:10, with 1.00 No. 23273.43

brick masonarry wall in C;M 1:6 finished with Cement plaster

in C;M; 1:3 incl. partition with half brick masonary.Etc

56 Bala concept drawings on walls as per the instruction of 1.00 Job 34340.00

Engineer in charge

57 Supplying and fixing slide, seesaw and swing combo set as 1.00 Job 30300.00

per the instruction of Engineer in charge.

58 Demolition including stacking of all serviceable materials and 1.00 Job 18079.00

disposal of all unserviceable materials with all lead and lift.

Item Description of Item (With brief specification andPage

8 to Quantity Unit Rate Amount

No. book of Specification)

59 Point wiring for Light / Fan / Bell / Primary Point with 2-1.5 8.00 Point 299.97

Sq.mm & earth wire of 1.5 Sq.mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in /

flushed on wall /ceiling, complete with 6A Tissino Type ISI

marked flush type switch / bell push and accessories erected

on Metal / PVC Box covered with 3 mm thick PC

(Polycarbonate)

/ Acrylic sheet with necessary Lamp holder / ceiling rose /

H.D. Connector as directed. (c) with oval conduit /pvc casing

capping double lock type

60 Point wiring for independent PLUG with following size mains 5.00 Point 336.33

earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in /flushed on

wall/ceiling , complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity connection

erected on Metal / PVC box covered with 3 mm thick

PC(Polycarbonet) / Acrylic sheet. (h) with oval conduit /pvc

casing capping double lock type

61 Mains with ISI marked electrolyte stranded copper conductor, 45.00 Rmt. 66.66

Non PVC Zero Halogen free fire retardant insulated copper

conductor, insulated wire (HFFR) conforms to IS-694, erected

in existing pipe with 1.5sq. mm copper conductor of same

specifications for earth continuity of following size. [i] 3 wire

62 Supplying & erecting earth pit of minimum bore dia.150mm 1.00 No. 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043- 1987 made of corrosion free

G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications. (a) For Electrical Installation up to 440V

in normal soil Length of pipe - 1 Mtr Back filling compound -

Nos Bag of 15 Kg.

63 Providing & Erecting following Shockproof tissino type 2.00 No. 31.31

accessories erected on 3 mm thick PC (Polycarbonate) sheet in

PVC/ Metal Box. erected on wall/ ceiling. (1) One no Single

pole 6 A Switch / Bell push

64 Providing & Erecting following Shockproof tissino type 2.00 No. 47.47

accessories erected on 3 mm thick PC (Polycarbonate) sheet in

PVC/ Metal Box. erected on wall/ ceiling. (3) One no Single

pole 16 A Switch

65 Providing & Erecting following Shockproof tissino type 2.00 No. 219.17

accessories erected on 3 mm thick PC (Polycarbonate) sheet in

PVC/ Metal Box. erected on wall/ ceiling. (14) Electronic

Hum free EME Socket Type Steps Fan Regulator

Item Description of Item (With brief specification andPage

9 to Quantity Unit Rate Amount

No. book of Specification)

66 Providing & erecting Switch board for Computer or electric 2.00 No. 332.29

apparatus consisting of following items in single board erected

on PVC / Metal board with 3 mm thick PC (Polycarbonate) /

Acrylic sheet erected as directed 1 no. 6A/16A universal plug-

switch combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug

67 Providing & erecting 240 V MCB double pole switch for motor 1.00 No. 330.27

& inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(B) 40 Amp. Cat.III

68 Providing and erecting Sheet Steel powder coated MCB 1.00 No. 702.96

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, confirming to IS

13032 and BS 5486-1986 without MCB to house appropriate

nos. of MCBs. (The DBs should be used of same company of

MCB to be used) (A,a,iii)) Single phase 8 way single door

69 Supplying & erecting 5 stage single reverse osmosis water 1.00 No. 15620.66

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

40 psi inline type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH capacity &

erected as directed [B] 25 Ltr / Hr with 30 Ltr. Storage Tank

70 Supplying and erecting LED indoor fittings with LEDs of 2.00 No. 535.30

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(A)

Tube Light with integral driver (v) 36-40 Watts, Surge-2 KV, IP-

20, conventional 4 feet Cat-lll

71 Supplying and erecting led lamps with following wattage 3.00 No. 404.00

capacity of 220 to 240 voltage, minimum 15000 burning hours

life, 500 V in built-surge protection,Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP

holder (v) 21 to 30 watts Cat III

72 Providing and erecting Approved make Ceiling fan with 2.00 No. 1596.81

double ball bearing ISI mark with condenser

A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected

on existing hook or clamp with earthing. [Make shall be

approved by Engineer in charge]

Item Description of Item (With brief specification andPage

10 to Quantity Unit Rate Amount

No. book of Specification)

73 Approved make ELCBs / RCCBs conforming to IS: 12640 and 1.00 No. 1722.05

having sensitivity of 30 mA and Short Circuit withstand

capacity of 6 KA and suitable for operation on single phase

240 V. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed (ii)

40Amps. DP Cat-II

74 Providing & erecting open well type horizontal mono block 1.00 No. 7934.56

pump set with stainless steel body having following

specification (A) 0.5 H.P. single phase open well motor pump

set having discharge of 115 LPM @ 15 mtr. head suitable for

mm dia. delivery pipe

with control panel Cat. II

75 Providing and Fixing SS 304 Foldable Checking bed having 1.00 No. 6060.00

size 1.50 X 0.60 X 0.75 mm including using of 25mm dia pipe,

SS 2mm thick, matter of 25.4 (1") of

40 density, cover with regine cloth of approved quality etc

completed as directed by Engineer incharge.

76 Providing and Placing IT wood writing table having size 1.50 1.00 No. 12120.00

X 0.75 X 0.75 mt with one side drawer with using of 19mm

thick WP wood, top cover with 1 mm thick wood type

Formica including using of all necessary material & labour etc

completed as directed by Engineer incharge

77 Providing and Fixing of SS 304 Hanger for bag including 10.00 No. 252.50

using all necessary materials like SS rail, screw etc completed

as directed by Engineer Incharge.

78 Providing and Fixing pin cushion display board having size 1.00 No. 606.00

1.20 X 0.75 mt including using of alluminum section frame,

18mm thick WB plywood, nevy blue Cushion cloth pin etc

completed as directed by Engineer Incharge.

79 Providing and fixing PVC modular kitchen cabinet consisting 2.50 Sqmt. 6565.00

of base and wall units, made from high quality rigid PVC

boards (minimum 15–18 mm thick), including shutters,

shelves, drawers, SS hinges, telescopic channels, handles,

magnetic locks, necessary fittings, cutting, fixing, complete as

per design and direction of Engineer-in-charge.

80 Providing and fixing foldable MS ladder having 0.90mt wide 50.00 Kg. 110.77

& 3.60mt long including rod hinge arrangment at middle with

ladder including one coat of red oxide & two coats of oil paint

etc completed as directed by Engineer incharge.

81 Providing and fixing of hook of 10mm or 12mm dia including 1.00 No. 303.00

drilling hole, fixing of male- female thrade fastner sealing the

same with appoxy compound, finishing the same etc complete

as directed by Engineer incharge.

Item Description of Item (With brief specification andPage

11 to Quantity Unit Rate Amount

No. book of Specification)

82 Providing and fixing medical device & equipment standio 1.00 No. 1414.00

meter height measuring scale 2.10mt long including fixing in

wall with using of all heavy SS screw, rail etc complete as

directed by Engineer incharge.

83 Providing and supplying standard PVC (Polyvinyl chloride) 2.00 No. 1010.00

Chair with handle of approved design and make as directed

by Engineer incharge.

84 Providing and supplying standard PVC (Polyvinyl chloride) 2.00 No. 606.00

Stool having size 3.75 X 0.60 X 0.45mtr of approved make as

directed by Engineer incharge.

85 Providing & fixing ABC type fire extinguisher 4 kg ISI marked 1.00 No. 1515.00

86 Providing LED Screen 1.00 Job 15000.00

87 Excavation for foundation upto 1.5 m depth including sorting 12.60 CuM 117.08

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

88 Brick work using common burnt clay building bricks having 18.90 CuM 4021.02

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement :6 -fine sand)(B)

89 Brick work using common burnt clay building bricks having 12.00 SqM 4289.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement :6 -fine sand)(B)

90 Providing 15mm thick cement plaster in single coat onRough 141.05 SqM 163.85

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

91 Finishing wall with water proofing cement paint of on wall 141.05 SqM 57.44

surfaces (Two coats) to give an approved brand and

manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and

remains of loose powered materials.

Rs. Fifteen Lakhs Twenty Thousands Eight Hundred Thirty Four and Twenty Three

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent ( Should

be written in figures and words ) of the estimated rate mentioned above. Amount of My \ Our tender works

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

Item Description of Item (With brief specification andPage

12 to Quantity Unit Rate Amount

No. book of Specification)

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat (R&B) Division

Patdi Surendranagar