Karnataka

Active

Works

Other Works

AME to Electrical Section of Munirabad Camp and Colony for the Year 2025-26 (CAT-II-A)

Karnataka Neeravari Nigam Limited

KNNL Division TR Div No 1 Munirabad | Koppal, Karnataka

Amount: ₹2.5 LCloses: 15 Jun 2026

Tender Value

₹2.5 L

EMD Value

₹3,200

Closing Date

15 Jun 2026, 9:30 pm

Tender Inviting Organisation

Name

Karnataka Neeravari Nigam Limited

Work Description

AME to Electrical Section of Munirabad Camp and Colony for the Year 2025-26 (CAT-IIA)

Tender Information

Tender ID

293079

Reference Number

KNNL/2025-26/OW/WORK_INDENT4182/CALL-2

Tender Type

Reserved

Product Category

Other Works

Location

KNNL Division TR Div No 1 Munirabad

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredA copy of KPWD Class-IV & above registration

RequiredCAT-II-A Category Contractors should upload a scan copy of Caste Certificate Issued from competent Authority

RequiredCAT-II-A Category Contractors should upload a copy of Domicile certificate

RequiredA valid copy of the GST Certificate

RequiredCopy of the Income tax returns ITR-V filed for the Financial year for the year 2024-25 Assessment year 2025-26

RequiredEmployees Provident Fund EPF registration certificate

RequiredBID CAPACITY Assessed available tender capacity AXNX5-B

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The intending bidders are advised to visit the site of work to understand the very nature of work, methodology, technicalities, work preparedness etc., before submission of their tenders

Modification to the release of APS conditions of contract: If the percentage quoted by the contractor for the work is below 90% of the estimated amount put to tender or recast amount put to tender of the Department, then the contractor shall furnish an additional performance security in the form of Bank Guarantee for an amount equivalent to the difference between the cost as per quoted percentage and 90% of the estimated amount put to tender or recast amount put to tender. In case of contractor quoted rates above 125% of the estimated rates, then the amount over and above 125% will be held during the progress of work. The additional performance security will be released proportionately to the bill amount till the contractor achieves progress of the entire cost of the work as per the agreement

The necessary certificates/documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to their e-tender documents. The Original certificates/documents shall be produced on or before stipulated date and time for verification

If any of the dates mentioned above happens to be a general holiday, the next working day is valid

Further information can be obtained from the office of the Executive Engineer, No.1, T.R Division, Munirabad during office hours email id trdmrb at gmail.com

Conditional tenders will be rejected and E.M.D. will be forfeited. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever

Corrigendum will be published in the web site for all modifications/corrections if any

The intending bidders should note that, if any of lands either in part/parts or whole required for the work is not acquired by the Nigam/Department it shall be the responsibility of the bidder to take possession of such land and start the work by consent of the land owners before commencement of work at no extra cost to the Nigam/Department and no claim whatsoever relating to non availability of land is acceptable

The contractor should mention their recent correct postal address and e-mail address in the declaration form

All materials like sand, Jelly, Stones, Wood / Rubble steel, cement etc., required for the above work should be procured by the contractor only

The contractor/firm shall send the authorization letter of their representatives duly attested by their signature

The Tender processing charges paid by the bidders are non-refundable, even if their tenders are cancelled

Incomplete tender documents will be summarily rejected

As per the Karnataka building and other construction Workers Welfare Cess Act 1996 , 1% of the bill amount will be deducted from each bill

1Tenders will be opened on the due date in presence of the contractor or their authorized agents

The contractor / Firm / Company should adhere to the accepted action plan submitted by them under any circumstances, without linking to the pending bill payment of the work

Typo-graphical errors (if any) will not be the ground for any claims by the Contractor

Maintenance period or the defect liability period for this works is 12 months from the date of completion of work

EMD of the unsuccessful bidders will be refunded only after the acceptance of tenders by the Competent Authority

Technical Criteria

Capabilities of Vendor

A copy of KPWD Class-IV & above registration

PWD Registration Certificate (Class I/II/III/IV)

CAT-II(A) Category Contractors should upload a scan copy of Caste Certificate Issued from competent Authority.

Others -- CASTE CERTIFICATE

CAT-II(A) Category Contractors should upload a copy of Domicile certificate

Others -- DOMICILE CERTIFICATE

A valid copy of the GST Certificate

GST Registration

Employees Provident Fund (EPF) registration certificate

Valid EPF Certificate

Financial Status

Copy of the Income tax returns (ITR-V) filed for the Financial year for the year 2024-25 (Assessment year 2025-26)

ITR Filed Copy (Mentioning PAN)

Others

BID CAPACITY Assessed available tender capacity (AXNX5-B)

Others -- BID CAPACITY

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹3,200

Important Dates

Last Activity

2 Jun 2026

Published

2 Jun 2026

Bid Opening

16 Jun 2026

Download Ends

8 Jun 2026

BOQ Preview

•

Name of work :- AME to Electrical Section of Munirabad Camp and Colony for the Year 2025-26

•

It.No Item of work UNIT QUANTITY RATE AMOUNT

•

1 Supplying of ......feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 2' - 9/10 W Each 20.00 551.00 11020.00

•

2 Supplying of ......feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W Each 12.00 690.00 8280.00

•

3 Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. 6 Amps bell push No 12.00 70.00 840.00

•

4 Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. Electronic stepped regulator. No 10.00 281.00 2810.00

•

5 Supplying wall mounting fan suitable to operate at single-phase230v AC. supply.400 mm Sweep Each 5.00 3212.00 16060.00

•

6 Supplying of…TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 Volts with hermetically sealed inverter compressor with air cooled condenser, latest R410A / R-32 refrigerant fan motor, start & run capacitors, relay & over load protector internal unit, with one indoor & one outdoor unit. The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. 5 star 1 ton capacity Each 2.00 47557.00 95114.00

•

7 Rewinding a … mm ceiling fan/after using necessary gauge annealed and insulated copper wire with necessary insulating, separators vibration arresting shellac, etc including replacement of bearings if any transportation to and from the spot to workshop inclusive of releasing the refixing. 1200MM Each 10.00 765.00 7650.00

•

8 Rewinding a … mm ceiling fan/after using necessary gauge annealed and insulated copper wire with necessary insulating, separators vibration arresting shellac, etc including replacement of bearings if any transportation to and from the spot to workshop inclusive of releasing the refixing. 1400MM Each 8.00 798.00 6384.00

•

9 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.. Each 3.00 15895.00 47685.00

•

10 Supplying & filling refrigerant latest R-410 / R-32 for air conditioning equipment's. Which includes the labour & Nitrogen gas for pressure and leak testing. Kg 23.00 579.00 13317.00

•

11 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W Each 5.00 1671.00 8355.00

•

12 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned No 6.00 5992.00 35952.00

•

TOTAL 253,467.00 GST @ 18% Round off Total

•

Executive Engineer 761280.46

•

KNNL, No-1 T. R. Division 137,031.00

•

Munirabad 898311.46

•

Name of work :- AME to Electrical Section of Munirabad Camp and Colony for the Year 2025-26

•

It.No Item of work UNIT QUANTITY RATE AMOUNT

•

1 Supplying of ......feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70 percent lumen maintenance with CRI greater than 80. Power Input: 220 -240V at 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 2 feet -9/10 W Each 20.00 551.00 11020.00

•

2 Supplying of ......feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70 percent lumen maintenance with CRI greater than 80. Power Input: 220 -240V at 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4 feet -20/22 W Each 12.00 690.00 8280.00

•

3 Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. 6 Amps bell push No 12.00 70.00 840.00

•

4 Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. Electronic stepped regulator. No 10.00 281.00 2810.00

•

5 Supplying wall mounting fan suitable to operate at single-phase230v AC. supply.400 mm Sweep Each 5.00 3212.00 16060.00

•

6 Supplying of…TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 Volts with hermetically sealed inverter compressor with air cooled condenser, latest R410A/R-32 refrigerant fan motor, start & run capacitors, relay & over load protector internal unit, with one indoor & one outdoor unit. The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. 5 star 1 ton capacity Each 2.00 47557.00 95114.00

•

7 Rewinding a ..mm ceiling fan/after using necessary gauge annealed and insulated copper wire with necessary insulating, separators vibration arresting shellac, etc including replacement of bearings if any transportation to and from the spot to workshop inclusive of releasing the refixing. 1200MM Each 10.00 765.00 7650.00

•

8 Rewinding a …mm ceiling fan/after using necessary gauge annealed and insulated copper wire with necessary insulating, separators vibration arresting shellac, etc including replacement of bearings if any transportation to and from the spot to workshop inclusive of releasing the refixing. 1400MM Each 8.00 798.00 6384.00

•

9 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. Each 3.00 15895.00 47685.00

•

10 Supplying & filling refrigerant latest R-410/R-32 for air conditioning equipments. Which includes the labour & Nitrogen gas for pressure and leak testing. Kg 23.00 579.00 13317.00

•

11 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70 percent lumen maintenance with CRI greater than 80. Power Input 220-240V at 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED square or round down light 15-18W Each 5.00 1671.00 8355.00

•

12 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001 2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned No 6.00 5992.00 35952.00

•

TOTAL 253,467.00 GST @ 18% Round off Total

•

Executive Engineer 761280.46

•

KNNL, No-1 T. R. Division 137,031.00

•

Munirabad 898311.46

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Tender Notification Call-2.docx

Others - TENDER NOTIFICATION • 0.04 MB

kw-1 CAT-IIA Electrical installation.doc

Tender Document • 1.07 MB

Schedule B-AME of Electrical installation.xlsx

Others - SCHEDULE B • 0.02 MB

Ready to Participate?

Download all tender documents and submit your bid