Repairs to Jan Seva Kendra at Mamlatdar office at Jodia (Full Renovation of Jan Seva Kendra & Toilet Block, Repairs to Door and Windows, Inside Paint, Plumbing and Other Misc. Work).

Name of Work :- Repairs to Janseva kendra at Mamlatdar Office at Jodia. ( Full renovation of

Jan Seva Kendra & Toilet Block, Repairs to door and windows , Inside Paint,Plumbing and

Other Misc Work.)

BILL OF QUANTITIES

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

1 Dismentaling tiled of stone floors laid in 266.00 Sqm. 50.27

mortar including stacking of serviceable

materilas and disposal of unserviceable

materials with all lead and lift.

2 Dismentling doors, windows, ventilators etc. 17.00 No. 196.65

(wood or steel) shutters including

chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them

within all lead and lift.(i) Not exceeding

3 Dismantling santtary fittings like wash basin 30.00 No. 424.09

. W.C. pan Indian and European type,

flushing tank etc. including stacking the

materials with all lead and lift.

4 Dismentling C.I. pipes G.S.W.pipes abd A.C. 60.00 Rmt. 78.49

rain water pipes with fittings and clamps

including stacking the materials with all lead

and lift ( for any dia, of pipe)

5 Removing and scraping of old deteriorated 755.00 Sqm. 20.36

Plaster of any thickness from wall / RCC

member including stacking of serviceable

material and disposal of unserviceable from

site of work with all lead.

6 Brick work using common burnt clay 4.00 Cum. 4568.40

building bricks having crushing strength not

less than 35 kg./Sq.Cm. in Super structure in

Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional

7 Providing 10mm thick cement plaster in 193.00 Sqm. 124.83

single coat on brick concrete walls for

interior plastering upto floor two level and

finished even smooth in (i) Cement Mortar

1:4 (1-Cement:4-sand)

8 Providing 15mm thick cement plaster in 326.00 Sqm. 225.28

single coat on brick concrete walls for

interior plastering upto floor two level and

finished even smooth in (i) Cement Mortar

1:3 (1-Cement:3-sand) with two coats of

putty and two coats of primer of approved

9 20mm thick sand faced cement plaster on 407.00 Sqm. 323.21

walls on height 10 metres above ground

level consisting of 12mm thick backing coat

of C.M. 1:3 (1-Cement:3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-Cement:1-

sand) etc. complete.

1 of 10 DTP of Mamlatdar Office Jodiya 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

10 Providing 20mm thick water proof cement 57.0 Sqm. 327.24

plaster for sunk in single coat on brick

concrete wall for interior plastering upto

floor two level finished even and smooth (ii)

Cement Mortar 1:3 (1-Cement:3-sand) and

mixing water proofing materials of approved

brand and manufacture in cement mortar in

proportion recommended by the

manufacturer for all floors.

11 Filling in foundation and plinth with brick 23.00 Sqm. 625.47

Bats Chhara in layers of 20cm. thickness

including watering, remming and

consolidating etc. complete

12 Providing and laying white glazed tiles 6mm 91.00 Sqm. 964.47

thick in flooring treads of steps and landing

laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement

13 Providing and laying coloured glazed tiles of 295.00 Sqm. 1523.66

the size 300 mm x 200 mm x 8 mm / 300 mm x

450 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster

1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry

14 Providing and laying Vitrified tiles 8 to 10 9.00 Sqm. 1120.36

mm thick , 24'' x 24'' in flooring treads of

steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in

15 Providing and fixing 18mm thick black 35.00 Sqm. 3109.79

granite stone in Jambs & sills for door over

10mm (Average) thick base of cement

mortar 1:3 (1-cement : 3-coarse sand) laid

over and jointed with grey cement slurry

including rubbing and polishing etc.

16 Providing & supplying Curtain of Vertical 17.00 Sqm. 1858.40

blinds with thread, with necessary fittings,

fixtures and fastening etc. complete as per

approved & as directed by Engineer in

17 Repairs to Damaged alluminium section 18.00 Sqm. 707.00

Door window including replacing necessary

spares, such as screw. nuts, bolts, handles,

hinges, rubber lining, packing sheets etc.

and making the door window fuctional &

good looking, but excluding cost of glass,

door closer winding spring mosquitoes nets

etc. cost of all tools, plants, labour etc

including) (C) Alluminium section window

2 of 10 DTP of Mamlatdar Office Jodiya 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

18 Repairs to doors and windows shutters incl. 29.00 Sqm. 684.78

repairing of broken components of teak

wood and providing missing components of

teak wood includi1g providing necessary

missing S. S . fixtures and fastenings and

touching with oil painting to match with

existing colour etc. Comp

19 Providing and fixing of 28mm thick fiber 16.00 Sqm. 1560.32

glass shutter with 1.5 to 2.0mm thick fire

extinguishing grade FRP skin in depressed

panel design having extra reinforcement on

sides and edges and in Gel coat finish. The

core of the shutter is to be filled up with

injected fire extinguishing grade

polyurethane foam done in situ along with

embedded wodden pieces for stiffening and

also for taking hinges and fixtures. The

whole shutter is to be waterproof,

weatherproof, termite proof and resitance to

mild acid / Alkali, Rates are to be inclusive of

S. / S. hinges with necessary screws and

alluminium fixtures and fastening.

20 Providing and fixing 35mm thick flush door 15.00 Sqm. 4432.89

of standard quality with both side laminated

including all heavy type S.S. fixture &

fastenings etc complete.

21 Providing & laying both side POLISHED 33.00 Sqm. 843.35

KOTAH STONE SHELVES to C.B. with

making the grooves in the walls and fixing

the kotah stone finishing the same with

cement mortar 1:2 etc. complete.

22 Making Frame type cupboard of 18mm thick 24.00 Sqm. 4181.40

water proof plywood shutter with 1.00 mm

lamination for outside and inside 0.8mm

lamination for cupboard incl. necessary

hydraulic type SS hinges, fixtures and

fastening and locking arrangement

23 Providing and fixing 5mm thick glass mirror 3.50 Sqm. 2544.19

machine cut belveled edge mounted on wall

with special type wall touch SS mirror

bracket fixing with necessary plugs.

24 Water proofing of leakage terrace by using 1025.00 Sqm. 172.71

necessary approved water proofing

chemicals including cleaning of terrace

(with all labour and materials)

3 of 10 DTP of Mamlatdar Office Jodiya 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

25 Providing and laying machine cut free 17.00 Sqm. 1415.01

edges, machine polished Kota stone { single

piece not more than 1.50 mt} of even grade

18 mm (Average) thick for steps and riser as

per design incl. rounded front edge & 1 cm

nosing in trade of steps laid on 20 mm thick

cement mortar 1:6 (1 –cement : 6 coarse

sand ) on treads & 10 mm thick Cement

mortar 1:3 for risers, jointed with grey

cement slurry including rubbing and

polishing etc. complete

26 Providing and fixing Kotah slab partition 9.00 Sqm. 1212.46

(18mm thick) incl. making in groove in wall

and fixed with cement mortar 1:3 (1-cement :

3- coarse sand and jointed with grey cement

slurry including polishing both side with

single pieces as per size of partition and

moulding the edge etc. complete.

27 Providing laying and jointing in true line and 37.00 Rmt. 72.64

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

28 Providing laying and jointing in true line and 14.00 Rmt. 91.83

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

29 Providing laying and jointing in true line and 112.00 Rmt. 148.11

level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help Of clamp at every two

metre CIC or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost Of all

30 Providing laying and jointing in true line and 70.00 Rmt. 195.66

level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help Of clamp at every two

metre CIC or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost Of all

4 of 10 DTP of Mamlatdar Office Jodiya 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

31 Providing, laying and jointing in true line and 115.00 Rmt. 897.78

level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe

line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement

including cost of all materials.

32 Providing, laying and jointing in true line and 22.00 Rmt. 834.38

level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe

line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement

including cost of all materials.

33 Providing and fixing to wall ceiling and floor 13.50 Rmt. 280.23

10.0 Kg. F/Cm2 working pressure polythene

pipes of the following outside Dia. Low

densidy, complete with special falnge

compression type fittings, wall clipsetc.

including making good the wall ceiling and

34 Providing and fixing PVC SWR Nahni Trap IS 12.00 No. 588.26

14735 for drain with jali of the following

nominal diameter of self cleansing design

with C.I. Scrwed down or hinged grating

including the cost of cutting and making

good the walls. (B) 75mm diameter

35 Providing and fixing Butterfly valves IS 2.00 No. 1919.00

13095 with ISI mark PN 1.6 of aprroved

brand & follwing internal dia including fixing

in pipe lines etc.complete (A) 50 mm Dia

36 Providing and fixing Gun metal check or non 3.00 No. 420.63

return fullway wheel valve. (C) 25mm dia.

5 of 10 DTP of Mamlatdar Office Jodiya 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

37 Providing and fixing wash down water closet 2.00 No. 10027.28

(European type WC pan) Cera or equivalent

quality with PVC seat cover inlet & outlet

gasket, CI chair brackets including

concealed type flush cock of Jaquar or

equivalent quality with jet spray etc.

38 Providing and fixing wash down water closet 2.00 No. 1689.73

(European type W.C.Pan / Anglo Indian) with

integral "P" or "S" traps including jointing

the trap with soil pipe in canal mortar 1:1 (1-

Cement:1-fine sand) providign and fixing

seat cover W.C.) 32mm dia galvanized steel

tube flush pipe etc. comp.

39 Providing and fixing water closet closet 6.00 No. 1978.59

squatting pan (Indian type W.C.pan / Orrissa

pan) size 580mm including Foot rest G.I.

inlet connection & C.P. Brass Flush cock of

25mm dia. etc. comp.

40 Providing and fixing flat back wash basin of 10.00 No. 2363.40

550 x 400mm size including C.I. or M.S.

brackets fixing in wall C.P. brass work of

32mm dia,,. fisher union of 32mm, pillar cock

of 15mm dia, PVC waste pipe, PVC

connection, brass stopcock of 15mm dia

41 Providing and fixing Brass Chromium plated 18.00 No. 186.82

screw down bib tap of 15 mm size.

42 Providing erecting and fixing Tripal layer ISI 3000.00 Ltr. 12.52

water tank of required capacity each with all

necessary fittings , tank cover and as

required connection etc. complete on

43 Constructing brick masonry chamber for 6.00 No. 3660.75

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg.

) (R.C.C. top slabe with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside

dimensions 500mm x 700 mm and 450mm

deep for pipe line with one or two inlets

44 Providing and fixing Flat back long pattrn 13.00 No. 1432.18

stall type urinal of approved quality

including connecting inlet connection and

PVC waste coupline and concealed waste

pipe etc comp with earthenware of size

670x335x365 mm er equivalend.

6 of 10 DTP of Mamlatdar Office Jodiya 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

45 Re-fixing existing Pre cast rubber Dye inter 140.00 Sqm. 465.61

locking concrete Block 60mm thick with

grade of concrete M-200 pnumatic

compressed by mechanically pressed and

as required missing or broken block as

same existing shape and size as per existing

design of existing flooring including

required qty of sand for leveling and filling

the joint with sand in proper line and level

etc complete as per EIC.

46 Cleaning of manholes by removing sludege, 10.00 No. 696.90

dirt, waste etc from the manhole and making

it clean, fuctional including disposing of the

waste, making the work site clean & fixing

the existing manhole cover as directed upto

Manhole volume 0.50 to 1.00 cum

47 Cleaning of Blocked drainage line 100mm to 37.00 Rmt. 126.25

150mm dia / size and making it clean,

fuctional (Only labour work)

48 Wall painting (two coats) with plastic 1284.00 Sqm. 86.37

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and

sand papered smooth.

49 Wall painting (two coats) with plastic 775.00 Sqm. 92.03

emulsion paint of approved brand and

manufacture on undecorated Ceilings and

sloping roofs surface to give an even shade

including throughly brushing the surface

free from mortar droppings and other

foreign matter and sand papered smooth.

50 Painting one coat (excluding priming coat) 422.00 Sqm. 117.55

on previously painted steel and other metal

surface with enamel paint brushing to give

an even shade including cleaning the

surface of all dirt, dust and other foreign

matter. for every subsequent coat of paint

51 Finishing wall with weather proof exterior 407.00 Sqm. 122.13

emulsion paint on wall surface (two coats) to

give an required shape aeven shade after

throguhly brushing the surface to remove all

dirt, and remains of loose powdered

materials etc.comp.

7 of 10 DTP of Mamlatdar Office Jodiya 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

52 Open type storage rack:-Providing and 10.00 No. 4413.70

fixing open type storage rack of size 1500 x

380 x 2130 mm size with 5 compartments

Nos. of shelves 0.90 mm thick with

adjustable arrangement and manufactured

with sloped angle 40 x 40 x 2 mm thick. The

rates shall be essamballed with G.I. bolts,

nuts and washers all material shall be with

10 tank anti-rast treated and as directed by

Engineer-in-charge.

53 Providing and fixing SS THREE SEATER 10.00 No. 11882.65

BENCH It should be made up of black

powder coated rectangular M.S.ERW tube

0.014 cm size. It should be chrome plated

made of cold rolled steel with 0.12 ±

cm thinkness. It should be powder-coated

perforated shell made from cold rolled M.S.

sheet (DIN1623 Partl ST-12 Grade) 0.14 ±

0.013 cm thickness.The Side Bar should be

made of Chrome plated solid steel 3.0 ±

cm x 1.2 ± 0.3 cm with fluting and plastic

inserts. The Shell should be assembled on

the Cross Beam with help of M8 Bolts (Per

Seat - 8 nos. Seat to Bracket and 4nos.

Bracket to Cross Beam). Overall Dimensions

Seat Height - 40.0cm, Height - 67.5 cm,

Width & Depth of Chair as - Width-163.0cm

and Depth-57.0 cm.

54 Supplying of Med. Back Rev. Chair Upholstered with 6.00 No. 5342.90

Leatherette seat made up of 12 mm +/- 1 mm thick hot

pressed Mr grad plywood and back in two Pieces - 12 mm

Rear Back and 6 mm inner Back. Moulded polyurethane foam

used in making seat with moulded density 45+/- 2 kg/m ³.

Back is made out of 32 Density Block Foam covered with

mm thick 32 density foam sheet (Block foam).Spine bracket

made of M.S plate 8 mm Thickness connecting back with

mechanism. Armrest top is soft touch polyurethane moulded

of 250 to 300 density insert in chrome finish pipe having

unique "BIRD BEAK"shape. The mechanism of the chair have

following features: 360⁰ revolving type 3.5mm Thk CRCA seat

plate with 4mm thk CRCA channel plate synchro Mechanism,

Tilt tension adjustable, Single position locking , Plastic

component inside the mechanism of Grade - MI 3530 and

Epoxy Powder coated 70 Microns with tested 1.2 lacs cycles

as per BIFMA Standard The chair provided with pneumatic

height adjustment which have have stroke of 100 mm +/-

mm.The five leg Base is made up of 38mm dia x 1.2mm thick

tubular with 3.15 mm thick centre hub CRC fabricated

chrome finish. It have be fitted with 50 mm dia Twin wheel

castor . The size of the base have be - 660 +/- 1 mm

pitchcentre-diameter. Load test as per BIFMA

compliance.The twin wheel castors have be made of Nylon

injection moulded in black colour.Overall dimensions of

Chair have be, Width of Chair - 630 mm, Depth of chair

mm as measured from base below. Height of back from

ground - min 950 to max 1050 mm. Seat height -min 470 mm

to max 570 mm. Dimensions tolerance / variations have be

within +/- 10 mm and directed by EIC

8 of 10 DTP of Mamlatdar Office Jodiya 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

55 Repairs to partition by repairing or 11.00 Sqm. 1393.80

replacing necessary componet like glass

and hand rest componet and including

making it good & fuctional (Rate includes all

the labour materials tools etc.)

56 Providing and fixing Sign board on 4mm 2.10 Sqm. 3467.33

thick transparent Acrycle sheet and letter

with sticker sheet including fixing etc

57 Clearing and grubbing road land including 0.15 Hect. 28455.09

uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to

300 mm removal of stumps of trees cut

earlier and disposal of unserviceable

materials (C) By mechanical means in area

of light jungle

58 Structural steel work ( Confirming to IS 4923- 625.00 Kg. 131.82

1997) riveted, bolted or welded in builtup for

all type sections, in framed work, including

cutting, hoisting, fixing in position and

applying a priming coat of approved steel

primer all complete as per the structural

designs and directions of Engineer in

Column ( 122 x 61 x 3.6mm )

59 Providing and fixing Colour coated 25.00 Sqm. 542.37

corrugated /semi corrugated Galvalume

sheet 0.50 mm thick roofing fixed with GI "J"

or "L" hooks bolts and nets 8mm dia with

bitumen washing filled with white lead

complete excluding cost of purlins, rafters

Total Rs. Rs.2479259.16

Note: Fix Deduction of Credit of Dismental Materials Rs.11800.00 will be deduct from 1st RA bill.

Amount of my tender work out as under

I / We am/are willing to carry out the work at ………………………………………….. % above / below Percent [should be

written in figures and words] of the estimated rates mantioned above. Amount of my/our tender works out as under

Estimated Amount Put to tender: Estimated Amount Put to tender:

Deduct % below Add % above

Net Rs. Net Rs.

In words : In words :

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Dhrol (R & B) Sub Division Jamnagar (R & B) Division,

Dhrol. Jamnagar.

9 of 10 DTP of Mamlatdar Office Jodiya 12-25

Sr. No. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

and reference to book of specifications)

1) The work shall be carried out as per Public Works Department Hand Book, I.S. Specification

and other specification of the Division or as Directed.

2) All the columns in Schedule should be filled in INK and the total of the entries in the last column

should be strike out by the Contractor under his Signature.

3) Rates should include clearance of site (Prior to commencement of work and its close) in all

respect and good for work under all conditions of site moisture weather etc.

4) The Contractor shall exhibit the details of works, Tenders amount and specification as per

Govt. Circular No. TD 32772 N. Dt. 26-4-78 and as per G.R. No. TNC-9-24-C, Dt. 18-11-91, as

directed by Engineer-in-Charge of the works, on board at site of the work.

5) Contractor shall even "NIL" percentage, if no deduction is offered.

6) Testing of materials shall be as per statement attached with the specification. The material

shall be tested in GERI Bill for the testing shall be paid by the Executive Engineer and 1% of

amount put to tender after deducting the cost of materials to be supplied by Department as per

SCHEDULE 'A' at the sanctioned estimate rates from the Contractor in Running Bills. (As per

G.R.No. (R&B) TNC-1085/4/C Dt. 20-12-91 and modified ide (R&B) Deptt. Circular No.

7) For R.C.C. Item where there is change of grade mix or charge as per actual mix design the

difference of cement consumption shall be deducted from rate of original item at the rate of

star rate mentioned in the tender.

8) 1% L.C. shall be deducted from the bill as per agreement.

9) GST will be paid extra as per Govt. Emendment.

10) GST and Income tax will be deducted at source while making payment of bills

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Dhrol (R & B) Sub Division Jamnagar (R & B) Division,

Dhrol. Jamnagar.

10 of 10 DTP of Mamlatdar Office Jodiya 12-25