Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹93.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹9.8 L+₹41,800.96 (4.45%)Rejected-AOC | L2 | Rejected-AOC 2ND LOWEST |
Tender Value
₹11.0 L
EMD Value
₹27,535
Closing Date
20 Oct 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Exe. Engr(Agri)Csez(po), kakkanad
O/o Assistant Exe. Engr(Agri)Csez(po), kakkanad
District Panchayath-2022-23 Renovation and allied works of Polyhouses at SSF Okkal, Ernakulam District.
2022_AGRI_515402_1
AE(3)410-3/22
Open Tender
Civil Works - Others
Item Rate
300 days
SSF OKKAL
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,600
₹27,535
7 Jan 2023
12 Oct 2022
22 Oct 2022
12 Oct 2022
20 Oct 2022
12 Oct 2022
Amount
Appendix-1-Repair of rain shelter at Tunnel Area
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
od4303/2022_2023 : Supplying and laying black weed mat using Ground Cover; Widely used For Agriculture farms and home garden to restrain the grass growing
Appendix-2-Front sales counter
od3772/2022_2023 : Dismantling re-fixing of existing tubular section of steel work manually / by mechanical means in built up sections for completing the work as per directions of Engineer -in-Charge.
od3765/2022_2023 : Supplying and fixing UV stabilized Polyethylene film 200 micron thick, IR blocking, Anti drip/ fog diffused multilayer, on the G.I. truss work with aluminium locking profile and zig zag spring galvanised with hex washer etc. complete but excluding the cost of aluminium locking profile and zig zag spring.
10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
Appendix-3-Rainshelter 1
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
od3774/2022_2023 : Supplying and fixing UV stabilized Polyethylene film 200 micron thick, IR blocking, Anti drip/ fog diffused multilayer, on the G.I. truss work with aluminium locking profile and zig zag spring galvanised with hex washer etc. complete but excluding the cost of aluminium locking profile and zig zag spring.
od3761/2022_2023 : Supplying and laying (HDPE coated) black weed mat using Ground Cover; Widely used For Agriculture farms and home garden to restrain the grass growing etc., to complete as per direction of Site Engineer.
od3762/2022_2023 : Supplying fixing and laying 50-75% (UV Stabilized) shade net on the movable shade net screening with aluminium strip channels or PVC coated zig zag springs/PVC coated handing hucks/rings with out damaging shade net with manual rolling systems including all frame work and necessary fittings at user comfortable height
Appendix-4-Rain Shelter - 2
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
od3776/2022_2023 : Supplying fixing and laying 50-75% shade net on the movable shade net screening with aluminium strip channels or PVC coated zig zag springs/PVC coated handing hucks/rings with out damaging shade net with manual rolling systems including all frame work and necessary fittings at user comfortable height
od3777/2022_2023 : Supplying and laying black weed mat using Ground Cover; Widely used For Agriculture farms and home garden to restrain the grass growing
Appendix-5-Slab
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
Appendix-6-Block-1-Vegetable Seedlings shed
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Appendix-7-Poly House-No.1- Fruit Plants
15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
15.19 : Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.
15.20 : Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metes.
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop
14.31.3 : Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete:100 mm
50.18.9.4.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2
50.18.9.5.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2
50.18.9.6.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2
18.62.4 : Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P / H.P.H.D plastic ball.40 mm nominal bore, 206 mm long, weighing not less than 690 gms
18.62.5 : Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P / H.P.H.D plastic ball.50 mm nominal bore, 242 mm long weighing not less than 1240 gms.
18.19.2.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):32 mm nominal boreHorizontal
od4405/2022_2023 : Supply and Installing LLDPE 16mm Drip Lateral Pipes, including Grommet, Take off, End holder etc., to complete as per the direction of Engineer in charge.
od4406/2022_2023 : Supplying and fixing of four way fogger emitters 5 to25 LPH leak proof snap fit joint ,fine droplets of average 90 microns, counter weight operating pressure 22psi
od4421/2022_2023 : Supplying and fitting micro jet/ sprinkler with 1 to 2 m wetted diameter and average discharge of 8-24 Iph and 0.30m length of LLDPE 5 mm micro hose/tube. And necessary fittings etc., to complete as per the direction of site in charge
od4506/2022_2023 : Supplying and fixing UV stabilized Polyethylene film 200 micron thick, IR blocking, Anti drip/ fog diffused multilayer, on the G.I. truss work with aluminium locking profile and zig zag spring galvanised with hex washer etc. complete but excluding the cost of aluminium locking profile and zig zag spring.
od4456/2022_2023 : Supplying and fixing Anti insect net/Mono insect net of 40 meah-100-120 GSM including wastage 5%, Size: 2.5 Mtr.,3 Mtr,4.2 Mtr, with aluminium locking profile and zig zag spring galvanised with hex washer etc. complete but excluding the cost of aluminium locking profile and zig zag spring.
od4457/2022_2023 : Supplying fixing and laying 50% to 75% shade net on the movable shade net screening with aluminium strip channels or PVC coated zig zag springs with out damaging shadenet with manual rolling systems including all frame work and necessary fittings at user comfortable height
od4458/2022_2023 : Supplying and laying black weed mat using Ground Cover; Widely used For Agriculture farms and home garden to restrain the grass growing
National Biotech
Bidder Name
National Biotech
ATTUPURAM CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_739096.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .