Repairs to Dixal Store at Kaparada Ta. Kaparada Dist. Valsad ( Repairing work)

Sr. Description of Item Quantity Unit Rate Amount

1 Anti-Termite System:Providing and laying of permanent piping 94.00 Sqmt 134.33

technology anti-termite treatment before flooring work by installing

LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm

1.D. with inbuilt pressure compensation chip every 30 cm interval in

the tube, having working pressure of 2 Kg/cm2 and release rate of

1.9 Itr/hour fixed by P-clips and nails. The LLDP pipe shall be

installed at the entire periphery of the building and at internal network

of building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr.

c/c distance (adjusted as per building layout ) & Ends of loop pass

through a PVC elbow of minimum 32 mm ID at junction box of wall

and floor level, entering into a steel reinforced grooved flexible pipe

of minimum 22 mm ID leading into junction box and the loops shall

terminate in junction boxes & test every junction during injecting

chemicals for termite control treatment. The anti termite chemical

Imidacloprid 30.5% SC mix as per IS-6313 (part III) shall be injected

by the pressure pump diluted with water @ 10.5 ml/5 ltr of water at

the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit

approved line plan for piping system and junction boxes dully

approved by Engineer-in-Charge with bond of 5 year warranty.(i)Anti

Termite chemical injected area (Chemical injecting incl. labour cost)

2 Removing dry or oil bound distemper by a washing and scraping and 395.00 Sqmt 11.30

sand papering the wall surface smooth including necessary repairs to

scratches complete.

3 Dismentaling tiled of stone floors laid in mortar including stacking of 140.00 Sqmt 48.21

serviceable materilas and disposal of unserviceable materials with all

4 Dismantling sanitary fittings like wash basin . W.C. pan Indian and 4.00 No 405.65

European type, flushing tank etc. including stacking the materials with

all lead and lift

5 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 15.00 No 187.71

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

6 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) 133.00 Sqmt 1404.64

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc.

complete for light shade

7 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in 12.00 Sqmt 1141.45

skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

8 Providing and laying antiskid ceramic tiles 30 x 30 cm size 6 mm thick 14.00 Sqmt 970.07

in flooring treads of steps and landing laid on a bed of 12 mm thick

cement mortar 1:3(1-cement:3-coarse sand)finishing with flush

pointing in white cement

9 Providing and laying glazed tiles tiles size 30 x 45 cm 6 mm thick in 76.00 Sqmt 1441.22

skirting risers of steps and dedo on 10 mm thick cement plaster 1:3

(1-cement:3coarse sand) and jointed with colour cement slurry

10 Providing 20 mm thick double coat mala cement plaster on interior 62.00 Sqmt 278.54

brick / concrete work for plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing, 10x10 mm grooves etc. complete. For Ground Floor

11 Providing 15mm thick cement plaster in single coat on Rough 137.00 Sqmt 171.80

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar 1:3

(1-cement:3-sand)

12 Applying two coats of Acrylic lapy (putty) & two coats of primer of 269.00 Sqmt 40.59

approved brand and manufacture on new wall surface to give an

even shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered smooth.

13 Wall painting (two coats) with plastic emulsion paint of approved 269.00 Sqmt 52.19

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

14 Painting (two coats) with plastic emulsion paint of approved brand 269.00 Sqmt 85.76

and manufacture on undecorated ceiling surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

15 Wall Painting (Two coats) with weather proof acraylic emulsion paint 62.00 Sqmt 114.53

of approved brand and manufacture and of required shade on

exterior wall surface to give an even shade over and including

primery coat with Alkaly resistance primer of approved brand after

thoroughly brushing surface to remove all dust and remains of loose

powdered material etc. copm. for all height

16 Providing and fixing mirror polished 18 mm thick Green Marble stone 38.00 Sqmt 2004.85

with full round edge and polished of approved quality in clading on sill

and around the doors/ windows/ ventilation with 12 mm thick cement

mortor CM (1:4) and fixing with cement slurry & adhesive including

moulding of exposed edges as directed by engineering in charge etc.

17 Providing and fixing 3 shutter 3 track window having extruded 20.00 Sqmt 2420.97

aluminum Colour anodized section frame main outer size 95mm x

24.10mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal two track

member size 92mm x 31.75mm x 1.50mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.07 Kg/mt with

sliding shutters of horizontal member size 40 mmx18mm x1.29mm @

wt.of 0.547 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm

@ wt.of 0.547Kg/mt, Beading clip 19mmx 17.30mmx0.90mm @ wt. of

0.124 Kg/mt with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

18 Providing and fixing standared extruded of alluminium section of size 2.00 Sqmt 1175.56

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

19 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick ( 11.90 Sqmt 2372.49

Fiber Glass with PUF Injection ) FRP depress panel Single or Double

shutter having extra reinforcement on sides & edges in Gel coat

finish.The core of the both shutter & frame is to be filed up with

injected fire retradat grade polyurethene foam done in situ along with

embeded wooden pieces for stiffening & also taking hinges &

fintures.The whole FRP frame & single or double shutter is to be

waterproof, weatherproof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary

screws & alluminum fixtures & fastenings & fartener sleeve.Colour

and Shade approved by Engineer-In-Charge.

20 Providinfg and fixing Safty grills of required pattern for windows/ Door 410.00 Kg 2181.60

using necessary 16x16 mm M.S. Square bar, M.S flats and other

structural steel at required spacing including cutting, welding and

fabriction etc. including one coat of primer of approved quality and

two coats of oil painting as per detail drawing etc complete.

21 Providing erecting and fixing double coated Syntex PVC. (ISI) water 4000.00 Litre 3.95

tank of required capacity each with all necessary fittings and

connection etc. complete on terrace.

22 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 55.00 Rmt 195.67

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

23 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 30.00 Rmt 148.12

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

24 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 7.00 Rmt 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

25 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 35.00 Rmt 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

26 Providing, laying and jointing in true line and level 110 diametre 20.00 Rmt 836.73

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

27 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 4.00 No 571.08

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

28 Providing and fixing wash down water closet (European type W C 2.00 No 3001.72

pan) with integral P and S trap including jointing the trap with soil pipe

in cement mortar 1:1 (1 cement five sand) including providing and

fixing plastic seat cover for wash down WC with CP brass hinges and

rubber buffers back plastic seat and including providing and fixing

PVC flushing tank with a pair of C I or MS bracket with complete

fitting such as lead valve siphon 15 mm dia brass ball valve with

polythene float CP brass handle unions and couplings for connection

with inlet out let and over flow pipes 40 mm dia porcelain enameled

flush bend including cutting holes in walls and making good the same

connection the flush bend with cistern and closet vitreous china.

29 Providing and fixing brass screw down stop tap.(A) 15mm dia. 4.00 No 205.83

30 Providing and fixing ball cock of approved. quality as directed.(A) 2.00 No 189.84

Copper Metal (ii) 50mm dia.

31 Providing and fixing washbasin with single hole for pillar tap with C.I. 2.00 No 1670.26

or M.S. brackets painted white including Rubber plug, sutting holes

and making good the same but excluding fittings and also including

rate of C.P. brass waste for washbasin or sink (A) 32mm dia. and

M.I. fisher union for washbasin or sink. (A) 32mm dia.; (A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white

32 Providing and fixing 600mm x 450mm bevelled edge mirrror of 2.00 No 833.73

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P. brass screws and washers.

33 Providing and fixing C.P. brass towel rail comlete with C.P. brass 2.00 No 603.19

brackets fixed to wooden plugs with C.P. brass scews (B) 600mm x

34 Providing and fixing screw down bib taps of following size.(A) Brass 2.00 No 214.81

screw down bib tap polished bright. (i) 20mm dia.

35 Providing and fixing pillar tap, capstan head, screw down high 2.00 No 308.73

pressure with screws, shanks and back nuts. (i) 15mm dia.

36 Providing and fixing chromium plated brass half trun flush cock of 2.00 No 263.77

approved quality including fixing in pipe line etc. complete (ii) 25mm

37 Providing and fixing S.W. gully trap with C.I. grating brick masonry 2.00 No 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight (i) Square mouth traps (B) 150mm

x 100mm size P or R type

38 Constructing brick masonry chamber for underground C.I. Inspection 3.00 No 3933.95

C.I. Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover

500mmx 700mm intenal dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete (i) Inside

dimensions 500mmx 700mm and 450mm deep for single pipe line.

39 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 140.00 Sq.Mt. 686.90

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

Deputy Executive Engineer, Executive Engineer

Dharampur (R&B) Sub Division Valsad (R&B) Division

Dharampur Valsad

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent should be

written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

*Estimated amount *Estimated amount

Put to tender Rs…1676148.04 Put to tender Rs…1676148.04

Deduct ……. % below Rs……………… Add ……. % Avove Rs…………..….

Net Rs. ……………… Total Rs. ………….…

In words ………………….…………………… In words ………………….

*( please strike out whichever is not applicable)

An Amount of 1760/- (Rupees ) shall be recovered from the 1st RA Bill of this work towards salvage value of dismentalled /

Diversion material likely to be available from dismentalling the Dismentaling of stone flooring irrespective of the

dismentalled quantity actuallly received on site.

All works shall be carried out as public works department Handbook and other

specification of Division or as directed.

All the columns in schedule should be filled in ink or ballpen and the total of the

entries in last column should be struck by the contractor under his signature.

Rate quated include clearance of site (Prior commencement of work and at its close)

in all respects and hold good for work under all conditions,site moisture, weather etc.

The Contractor shall exhibit a board with detailed specification and details of work

as directed by the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

To be continued on additional sheet,if found necessary.

Deputy Executive Engineer, Executive Engineer

Signature of the contractor Dharampur (R&B) Sub Division Valsad (R&B) Division

ÀùËÿëÀËßÞí çèí Dharampur Valsad