Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹28.9 L+₹17,794.50 (0.62%)Rejected-AOC ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L2 | Rejected-AOC Not being L1 | |
| 3 | L3₹29.9 L+₹1.2 L (4.22%)Rejected-AOC | L3 | Rejected-AOC Not being L1 | |
| 4 | L4₹30.1 L+₹1.3 L (4.64%)Rejected-AOC | L4 | Rejected-AOC Not being L1 | |
| 5 | L5₹30.3 L+₹1.5 L (5.30%)Rejected-AOC ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L5 | Rejected-AOC Not being L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
19 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ND VISAKHAPATNAM
Garrison Engineer Naval Depot Industrial Estate Post 104 Area Visakhapatnam 530007
CERTAIN BR REPAIRS AND PERIODICAL SERVICES AT M PETA UNDER AGE BR I OF GE ND VISAKHAPATNAM
2023_MES_606552_1
8286GEND
Open Tender
Civil Works
Item Rate
240 days
VISAKHAPATNAM
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE ND VISAKHAPATNAM
₹60,000
2 Feb 2024
28 Jun 2023
24 Jul 2023
28 Jun 2023
19 Jul 2023
12 Jul 2023
Amount
The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:- Tenderers/bidders are advised to visit the site and see the buildings themselves and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage.
Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work, removing debris & rubbish to a distance not exc 100m complete all as specified and directed.
M&L for RCC Design Mix M-30 (using 20 mm graded crushed stone aggregrate) in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs andd in shelves complete all as specified and directed
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200m thick (Horizontal or sloping), rough finished surfaces complete all as specified and directed.
M&L for Mild steel TMT bars 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
M&L for Mild steel TMT bars 6 mm to 8 mm dia, as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified and directed.
M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand brushing scrubing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy FOSROC and NITOBOND adehessive on complete exposed surfaces of concrete and provide guniting in two layers over steel welded mesh 2 mm dia of wire and total aperture 75 mm, thickness of gunite n.exc 25 mm thick (average thickness) using cement mortar 1 :3 cement mixed with polycrete admixture @ 2 % by wight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper Geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs,chajjas,fins,facias ,parapets ,columns and beams etc complete including necessary scaffolding ,shuttering necessary chased to brick work or RCC members at any height upto 3th floor buildings incl removing of small trees shrubs etc all as specified(Note: steel welded mesh to be welded with the existing reinforcement. The cost of welded meshis to be welded with the existing re-inforcement is deemed to be included in the quoted rate complete all as specified and directed.
M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand brushing scrubing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy FOSROC and NITOBOND adhesive or (equivalent make from list of makes as approved by GE) on complete exposed surfaces of concrete and provide guniting in two layers over steel welded mesh 2 mm dia of wire and total aperture 75 mm, thickness of gunite average thick ness exc 25 mm but not exc 50mm (average thickness) using cement mortar 1 :3 cement mixed with polycrete admixture @ 2 % by wight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper Geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs,chajjas,fins,facias ,parapets ,columns and beams etc complete including necessary scaffolding ,shuttering necessary chased to brick work or RCC members at any height upto 3th floor buildings incl removing of small trees shrubs etc all as specified (Note: steel welded mesh to be welded with the existing reinforcement. The cost of welded meshis to be welded with the existing re-inforcement is deemed to be included in the quoted rate complete all as specified and directed.
Running Welding including additional reinforcement with the existing rods of high strength corrosion resistant TMT bars 6 to 9 mm dia and over cut to length bent to shape complete all as specified and directed.
Running Welding including additional reinforcement with the existing rods of high strength corrosion resistant TMT bars 9 to 20 mm dia and over cut to length bent to shape complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 m and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed..
M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and directed..
Taking down of cement plaster of any description on brick or stone walls , ceiling , chajja , roof projection etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed..
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and directed..
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and fair without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions Note:- WPC shall be measured and paid separately).
M&L for Rendering 5 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja , roof projection, shelve etc and finished even and smooth without using extra cement complete all as specified and directed.
Prepration of surface by using vaccume based hand held or long handle sander machine and applying two coats of oil bound distemper over a coat of suitable primer by using auto roller or airless sprayer machine complete all as specified and directed
Prepration of new plastered wall surfaces by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying two coats of exterior weather proof (100% acryllic paint) over a coat of suitable primer by using auto roller or airless sprayer machiner complete all as specified and directed
Preparing newly plastered surfaces of walls by using vaccume based hand held or long handle sander machine and applying Three coats of white wash by using auto roller complete all as specified and directed .
Supply only liquid water proofing compound of approved quality complete all as specified and directed..
M&L Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) by using auto roller or airless sprayer machine complete all as specified and as directed.
Complete removal of existing treatment on wall and prepration of wall surface by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of exterior weather proof (100% acryllic paint) over a coat of suitable primer by using auto roller or airless sprayer machiner complete all as specified and directed
Prepration of old decorated surfaces of wall by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying one coat of exterior weather proof (100% acryllic paint) by using auto roller or airless sprayer machiner complete all as specified and directed
Complete removal of existing treatment on wall and prepration of surface by using vaccume based hand held or long handle sander machine and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of oil bound distemper over a coat of suitable primer by using auto roller or airless sprayer machiner complete all as specified and directed
Preparing old surfaces of wall by using vaccume based hand held or long handle sander machine and applying one coat of oil bound distemper by using Auto roller or Airless sprayer machine complete all as specified and directed .
Preparing old decorated surfaces of ceilings by using vaccume based hand held or long handle sander machine and applying two coats of white wash complete all as specified and directed .
Preparing old decorated surfaces of ceilings by using vaccume based hand held or long handle sander machine and applying one coat of white wash complete all as specified and directed .
M&L Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) by using auto roller or airless sprayer machine complete all as specified and as directed.
M&L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint by using auto roller or airless sprayer machine complete all as specified and as directed.
Preparing old decorated surfaces of walls by using vaccume based hand held or long handle sander machine and applying one coat of white wash complete all as specified and directed .
Preparing old decorated platered surfaces of walls by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying one coat of cement based paint by using auto roller or airless sprayer machine complete all as specified and directed .
M & L for Writing letters or figures (Block.Roman, Italic or Indian) not exceeding 30 cm high complete all as specified and directed
M & L for Writing Stops, commas, short lines, dashes,hyphens, circle, brackets, etc complete all as specified and directed.
Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and directed.
M & L for 50mm thick plain cement concrete type B1, (1:2:4) (using 20 mm graded stone crushed stone aggregate) in flooring/plinth protection including finishing the surface even and smooth without using extra cement complete all as specified and directed..
M&L for 100 mm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) for sub base of flooring /hard standing including finishing the surface even and rough to receive the topping layer complete all as specified and directed..
M & L for 25 mm thick PCC (1:2:4), type B1 (Using 20 mm graded crushed stone aggregate) as in flooring, rough finish surfaces for receving top layer complete all as specified and directed..
M & L for 25 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded crushed stone aggregate) as in flooring, finish even and smooth without using extra cement complete all as specified and directed
Dismentling of floor hearth or wall tiling of any description including cement mortar bedding (but not backing),removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:4) for backing of tiles complete all as specified and directed..
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match complete all as specified and directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and over and including 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match complete all as specified and directed..
M & L for Coloured Glazed ceramic tiles 300 x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement morter (1:4) complete all as specified and directed.
M&L Cement concrete tiles 300 cm x 300 cm x20mm thick, machine pressed with grey cement and pigment, set, jointed and poin ted in net cement shurry in floors, and cut and polished over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed
M & L for ATT along the external wall below concrete or masonry spron using chemical emulsion @ 2.25 ltrs per liners metre incl drilling and plugging holes etc in apron complete all as specified and directed.
M & L for Anti Termite Treatment of soil under existing floors using emulsion @ one litres per hole 300mm apart including drilling and plugging 12mm dia holes with cement mortor 1:2 (1cement : 2sand) to match the existing floors complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed..
S&F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.
S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.
S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
SAI SRINIVAS CONSTRUCTIONS
M/s Sai Venkata Durga Constructions
HUSSAIN ENGINEERING WORKS
PRASAD INFRAS
ESWAR CONSTRUCTIONS
RAJASHEKHAR ENTERPRISES
SRI SAI KRISHNA ENGINEERING WORKS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .