Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹8.1 Laccepted-aoc | accepted-aoc |
Tender Value
₹8.1 L
EMD Value
₹8,200
Closing Date
26 May 2026, 3:10 pmClosed
SRI BOYAKONDA GANGAMMA DEVASTHANAM
Chittor
Providing G.I.Sheet shed and Flooring Tiles and other works to Nithya Annadana satram relating to Sri Boyakonda Gangamma Temple at Diguvapalli (V),Chowdepalli(M),Chittoor(D).
931961
E/39/2026-1 dt 09-05-2026
OPEN - NCB
Civil Works
ANNAMAYYA
1 document required · 1 mandatory
₹288
₹8,200
10 Jun 2026
12 May 2026
12 May 2026
Supply and fixing of CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS aluminum glazed partitions using 10 MM CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS and 5 mm thick plain glass to full height. Using with LAM to a height of 0.91 meter at bottom panel and remaining height with glass and aluminum sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution.
Earth work excavation for foundations (Mechanical Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and 1m additional lift charges over the initial depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)
Drilling of holes with 20mm rods inserting to hard rock including cost and conveyance of all materials and labour charges etc complete.As per AP SSR S.No1011 of item code BMS-W.77
Grouting the holes with neat cement slurry excluding cost of steel including cost and conveyance of all materials and labour charges etc complete.As per AP SSR S.No1011 of item code MAT-00514 (20mm dia)
VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering shuttering : a) For Fotings
b) For Pedestals
Providing High Yield Strength Deformed (HYSD) (Fe 415/500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work in all floors.( APSS No.126)
Supply and fixing structural steel, base plates, Vertical posts , Frames, Trusses, purlins, including fabrication and fitting etc., complete A) Foundation Base Plates 12''x12''x12mm thick considaring Weight 14.15 kgs/1plate
B) Foundation Rods 1M Lenth 16mm thick considering Weight 1.58kgs/1Rod
C)Columns Pipes 5'' Sqaure Pipe with 5mm thick pipe , considering Weight 18.86 kgs/1Rmt
D) Truess Pipes and purlins 50x50x3.2 mm Square Pipe / considaring Weight 3.70 kgs/1Rmt A) 2 inch Horizontal pipes
B) 2 inch vertical pipes
Supply of century wells or equivalent pre-painted Galvalume trapezodial profile roofing sheets with 0.50 mm thickness, coating : Alu - Zinc coating AZ150 GSM. Tensile strength : 550 MPA, paint coating : Regular Modified polyester painting : painting Thickness (Top) 18 to 20 Microns, (Bottom) 5 to 7 Microns sheet width : 1,020 length : maximum 12 Meters with Regular Range Colours.
Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre to new iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
Supply of high strength Cement Concrete terrazzo/pre-polished/ chequered Step tiles with edge rounded and grooved conforming to IS: 13801 using aggregates, cement, pigments of any premium colour, design and of 25 mm thickness set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)
Supplying and fixing of Rolling shuter made of 80x1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accesssories etc., complete for finished item of work as per special spn. 1108
Supply & application of one coat deco orient base & two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
1 gi sheets.doc
TENDER_DOCUMENT • 0.55 MB
schedule.xls
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .