A/R and M/O General pooled accommodation

Amount

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm (One point four millimetre) in both directions with wire of dia 0.63 mm (Zero point sixty three millimetre) all complete With 2nd class teak wood beading 62X19 mm (Sixty two x Nineteen millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm (One millimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre (Fifty grams per litre), of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification Two or more coats on new work with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm (Three hundred x Three hundred millimetre) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (Twenty millimetre) thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm (Three point three kilogram/ square metre) including grouting the joints with white cement and matching pigments etc., complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram/ square metre) including grouting the joints with white cement and matching pigments etc., complete size of tile 600x600mm (Six hundred x Six hundred millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (Zero point ninety litre/ Ten square metre) over an under coat of primer applied @0.75 ltr/10sqm (Zero point seventy five litre/Ten square metre) of approved brand and manufacture with in all leads and lift of materials and as per direction of Engineer-in-charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (Zero point ninety litre/ Ten square metre) over an under coat of primer applied @ 0.80 ltr/10 sqm (Zero point eighty litre/ Ten square metre) of approved brand and manufacture with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm (One hundred ten millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS: 15801, UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply, including all PP-R plain & brass threaded polypropylene random fitting, i/c fixing the pipe with clamps at 1.00 m (One point zero metre) spacing. This includes the cost of cutting chases and making good the same including testing of joints complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre (Ten litre) low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (Forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15mm (Fifteen millimetre) dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm (Five hundred fifty x Four hundred millimetre) with a 15 mm (Fifteen millimetre) CP Brass single hole basin mixer with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing CP Brass waste for wash basin or sink (32mm (Thirty two millimeter) dia) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm (One hundred thirty eight millimetre), breadth 102mm (One hundred two millimetre), height of 75mm (Seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms (One hundred six grams) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing brass bib cock of approved quality 15 mm (Fifteen millimetre) nominal bore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing unplasticised P.V.C. connection pipe with brass unions: 45 cm (Forty five centimetre) length 15 mm (Fifteen millimetre) nominal bore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 100mm (One hundred millimetre) dia chromium plated grating of superior quality for floor, gully or nahani trap with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm (Fifteen millimetre) nominal bore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 300x16 mm (Three hundred x Sixteen millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing oxidised M.S. tower bolts (barrel type) with necessary screws etc. complete 150x10 mm (One hundred fifty x ten millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 9mm (Nine millimeter) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary Frosted Glass 3mm (Three millimetre) thick with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete with in all leads and lift of materials and as per direction of Engineer-in-charge. 110 mm (One hundred ten millimetre)

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete with in all leads and lift of materials and as per direction of Engineer-in-charge. 110 mm (One hundred ten millimetre)

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesiveetc. complete with in all leads and lift of materials and as per direction of Engineer-in-charge. 110 mm (One hundred ten millimetre)

Providing and fixing PVC offset 45* ISI marked including fixing with approved adhesiveetc. Complete with in all leads and lift of materials and as per direction of Engineer-in-charge. 110 mm (One hundred ten millimetre)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 50x12 mm (Fifty x Twelve millimetre) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (Forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required 610x460 mm (Six hundred ten x Four hundred sixty millimetre) bowl depth 200 with in all leads and lift of materials and as per direction of Engineer-in-charge.

NEERAJ SHARMA