COMPREHENSIVE MAINT OF MISC STRUCTURAL REPAIR DAMPNESS LEAKAGE SEEPAGE ROOF TREATMENT FLOORING REPAIRS TO COLUMNS FINS FACIA RAINWATER PIPES FLOORING PLASTERING PLINTH PROTECTION INTERNAL WS LINE WCS WHB PVC DOORS WATER TANKS AND INTERNAL ELECTRIFIC

Amount

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and directed.

All as per item No. 01 above but 20mm dia complete all as specified and directed.

All as per item No. 01 above but 25mm dia complete all as specified and directed.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and as directed.

All as per item No. 04 above but 20mm dia complete all as specified and directed.

All as per item No. 04 above but 25mm dia complete all as specified and directed.

Refixing of serviceable GI pipe 15mm bore obtained from item No.01 above after cleaning complete all as specified and directed.

Refixing of serviceable GI pipe 20mm bore obtained from item No.02 above after cleaning complete all as specified and directed.

Refixing of serviceable GI pipe 25mm bore obtained from item No.03 above after cleaning complete all as specified and directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Refixing of shutters in same opening of any description exceeding 1 Sqm each with old serviceable builders hard ware articles / with new builders hard ware articles if any complete all as specified and as directed. (Note : (i) New builders hard ware articles shall be measured and paid separately under “Supply only item. (ii) Old serviceable shutter obtained from item No 12 shall be reused).

Supply and fix 2nd class hard wood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Materials and labour for treating back of chowkhats etc with tar or coal tar black paint, area tarred exceeding 0.10 sqm but not exceeding 0.50 sqm each complete all as specified and as directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix 35mm thick 2nd class Hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed.

Taking down old unservicebale steel window/ventilators frame with shutter of any description complete all as specified and directed.

Supply and fix factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face, with particle board core, supplying and fixing in frame at site as per specification and drawing complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.

Supply ,fabricated and fixing with premium plus High Density Moisture Resistant (HDMR)premium board ,one side decorative lamination and other side balancing white,100% termite proof,18mm thick heavy density,exterior grade cutting, fabricating and suitable fixing for kitchen cabinets and shelves of any size darwers openable leaf complete including fixing only accessories such as Italian stainless steel hinges,handles,magnets as required etc complete all as speified and directed as under:- (a) Stainless steel handle fancy type 100mm size. (b) Stainless steel hinge Italian pattern suitable for cabinet and shelves opening/closing operation. (c) Magnet of suitable size fixed for cabinet leafs, drawers. Make: Century Ply board . Note :- The rate includes BWP Ply board and all connecting items mentioned aboveand the design and pattern should be approved by GE.

Supply only stainless steel handle fancy type 100mm size and complete all as specified and directed.

Supply only stainless steel hinge Italian pattern suitable for cabinet and shelves opening/closing operation and complete all as specified and directed.

Supply only magnet catchers suitable size for cabinet leafs and drawers and complete all as specified and directed.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified and as directed.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.

Supply and fix 100 mm size stainless steel butt hinges, medium weight fixed with cadmium plated screws complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix steel windows with side hung double shutters (both glazed and gauged shutters) in single frame including box type hinges with steel handle, and steel peg stay, complete with glazing bars for glazed shutter, dovetailed or welded including taking down old rusted unserviceable steel window with glass panes/wire mesh/grill/guard bar and all fittings complete all as specified and as directed.

Supply and fix steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, flush butt welded etc including taking down old windows with glass panes, grill/guard bar etc and all fittings complete all as specified and as directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beadings in square n exc 0.5 sq. m in each pane fixed to wooden frame complete all as specified and as directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane fixed to steel frame complete all as specified and as directed.

Supply and fix 3mm thick frosted glass ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed to steel frame complete all as specified and as directed.

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work complete all as specified and as directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing each pane fixed to steel frame(fixed with oil putty and clips)/wooden frame(fixed with Iind cl hard wood beads) including hacking out old broken glass from metal frmae/wooden frame complete all as specified and as directed.

Supply and fix 3mm thick frosted glass, ordinary quality and glazing in each pane fixed to steel frame(fixed with oil putty and clips)/wooden frame(fixed with Iind cl hard wood beads) including hacking out old broken glass from metal frmae/wooden frame complete all as specified and as directed.

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.

Supply and fix aluminium powder coated glazed or gauged shutter for sliding window(2 or 3 track) with aluminium channel section weighing not less than 0.55 kg per sqm including aluminium channel,including all necessary fittings such as rollar, joining cleats, glazing clips, rubber packing aluminium screw as required etc complete all as specified and as directed. (Note:Wiremess/ glass shall be measured and paid separately)

Supply and fix powder coated aluminium frame for doors, windows, ventilators (including 2/3 track) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fix 4mm thick sheet glass ordinary quality, glazing with aluminium beads in square/rectangular exceeding 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and as directed.

Supply and fix in repair 25mm dia powder coated aluminium curtain rod fancy type (length from 0.90m to 1.5m) with fancy type end side brackets and fancy type hanging brackets complete all as specified and as directed.

Material and labour for 2nd class hard wood , wrought, bullnosed, splayed, chamfered or rounded on one edge or face fillets, rectangular, square or triangular in section exceeding 6sqcm and not exceeding 13 sqcm, secured with screws including taking out old damaged fillets complete all as specified and as directed.

Supply and fix in repair 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repair angular stop cock of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and as directed.

Supply and fix in repair pillar cock of 15mm bore, cast copper alloy with capstan heads fancy type, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

Supply and fix in repair 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and as directed.

Supply and fix in repair 15mm bore Bib tap (Minimum weight 90gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix health faucet (ABS body) with 8mm dia 1 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix chromium plated two ways bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix in repair chormium plated wall mixer with connecting legs,for fixing in 15 mm dia pipe complete all as specified and directed.

Supply and fix in repair chormium plated mixer with connecting legs,for fixing in 15 mm dia pipes over wash hand basin complete all as specified and directed.

Supply and fix in repair chromium plated shower arm 400x25x25mm square shape for wall mounted shower with flange for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix in repair chormium plated shower 105mm dia round shape single flow with air effect (ABS body and face plate chrome plated with rubit cleaning system) for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix glass shelf 600mm long complete all as specified and as directed.

Supply and fix toilet paper holder with flap recessed type (stainless steel) complete all as specified and as directed.

Suply and fix in repairs stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 X 460 mm with bowl size 405x355x178mm or 410x357x178mm complete all as specified and as directed. (Model No.BSSBSD-52 of Blue Star/SBSD 05 of Joyna/ Equivalent)

Supply and fix in reapir vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed.

Supply and fix in repair Vitreous china EWC 'P' or 'S' Trap of size 400x365x540mm, white including Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for EWC (excl flushing cistern and flush pipe) complete all as specified and as directed.

Supply and fix in repairs vitreous China wash basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), 15mm bore PTMT pillar tap,chain and plug and porcelain stopper etc. complete all as specified and as directed.

Supply and fix in repair Brass chromium plated Tubular Towel Rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified and as directed.

Supply and fix in repairs PVC connection 15mm size with PTMT nuts of length 600 complete all as specified and as directed.

S & F in repairs Rotational moulded polyethylene water storage tanks multi-layered (cylinderical vertical with closed top) 1000 Ltr Capacity, hoisted and fixed in position complete all as specified and directed.

All as per item No.71 above but 500 Ltr capacity complete all as specified and directed.

Supply and fix in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

Supply and fixing in repair Gun-metal, globe or gate valves size 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair 100mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed.

Dismantling of old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed.

Roughnening surface of old concrete floor by picking ,sweeping clean and washing down with water to remove dust ,etc complete all as specified and directed.

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles (300x200) x7mm thick in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness below or above ground level complete all as specified and as directed.

Material and labour for 75mm thick PCC type D2 (1:4:8) (using 40mm garded stone aggragate) as in sub base of floors etc complete all as specified and as directed.

Material and labour for (300x300) x25 mm thick PCC designer Pre-polished tiles (Factory make and approved size) as in floors, set & jointed in neat cement slurry and pointed in coloured cement with pigment over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing liquid admixture for concrete and mortar (Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE)

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation and applying 1.50mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Material and labour for 40mm thick PCC 1:2:4 type B1 (using 20mm graded aggregate) as in floors complete all as specified and as directed.

Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/ plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand and finished the surface fair and even complete all as specified & directed.

Supply and fix in repairs UPVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip and including taking down existing rain water pipes complete all as specified and as directed.

Supply and fix UPVC bend/shoe 110mm dia complete all as specified and as directed.

Dismantling wall and ceiling board ( fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc. complete all as specified and directed.

Supply and fix Anodised aluminium snap grid frame work size of grid 605mmx605mm for false ceiling including GI hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as per manufacturers instruction complete all as specified and directed.

Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed.

Dismantling wrought iron for mild steel work for any description not otherwise provided for complete all as specified and directed.

Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed.

Dismantling Asbestos cement / Transluscent ( Corrugated , semicorrugated etc.) sheets as in Roof covering , wall , ridge , hips valleys and flashings etc for the building structures not exceeding 10 m height from the average ground level complete all as specified and as directed .

Supply and fix of pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Supply and fix of pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Demolition of reinforced cement concrete of roofs, floors , staircases, landing, chajjas and similar suspended works in ground floors beams(reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type A1 1:1.5:3 (20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type A1 1:1.5:3 (20mm graded stone aggregate) as in chajja , complete all as specified and directed.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed.

Material and labour for TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.

Material and labour for TMT bar or twisted bars upto 10mm dia as in stirrups cut to lenth bent to shape required including cranking ,bending etc and lapping ,welding as directed to the existing one complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)to all as specified and directed.

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cemen t(1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for providing cement concrete in foundations (1:2:4) type B2 (nominal mix using 40 mm graded stone aggregate) filling and mass concrete for securing/ fixing of fencing post/ strut in under water including necessary formwork and dewatering as required at site complete all as specified and directed.

Demolition of cement concrete of any description and in any position provided as in roof padding, roof curb etc including debris/retrieved materials disposed off out of MoD land as directed and complete all as specified and as directed. Note: - (a) Demolition to roof treatment should be done carefully . (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department.

Material and Labour for providing plain cement concrete 1:2:4,type B1 using 20mm graded aggregate as in roof padding over RCC slab,laid in slope as per requirement, mixed with integral water proofing liquid admixture as per manufacture's instructions complete all as specified and as directed. Note :- (i) Average thichness of PCC shall be 50 mm (ii) Integral water proofing liquid admixture shall be measured and paid seperately under appropriate item here in after.

Material and Labour for water proofing treatment with APP based standared membrane over PCC padding of roof with the following courses of treatment :- (a) Apply bituminous primer (IS-3384)@0.40kg/Ltr per sqm of the surface area,as per including cleaning the surfaces and all as specified. (Make of primer:-Pibial primer of TEXA or equivalent product of BITUMAT/BITUNIL/SIKA) (b) Apply APP plastomeric bitumen based water proofing membrane polyester reinforced (4 KG /Sqm)with 10 cm over laps and torch bonded at joints including surfacepreparation before and after application of treatment as per manufactures instruction complete all as specified and as directed.(Make of APP Membrane to Moply FP 4 kg mineral of TEXA/WP Shield 103 PM of SIKA or Eqiui valent material of BITUNIL/ BITUMAT.)

Taking down/ dismantling loose/ damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling,louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and as directed.

Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 120 above by wire brush including scrapping & cleaning with emery paper or by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etc and washing down with water as required complete all as specified and as directed.

M&L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/ specification. The bonding agent shall have minimum compressive strength of 40 Mpa and complete all as specified and directed by Engr-in-charge. ( Make : SIKA/FOSROC or any other equivalent as approved by GE )

Supply and application of Epoxy Zinc rich primer on the prepared steel surface by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5 Mpa complete all as specified and directed. ( Make : SIKA/FOSROC or any other equivalent as approved by GE )

M&L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-50 to the effected beam, column etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as spd and dir by Engr-in-charge.( Make : SIKA/FOSROC or any other equivalent as approved by GE )

Supply, mixing and application two component structural grade polymer modified reinstatement mortar, where local spalling has taken place or shuttering is not possible . The mortar can be applyied in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12 Mpa in 1 day and 45 Mpa in 28 days. Minimum flexural strength should be 8 Mpa in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24 Mpa. Minimum tensile strength 3.5 Mpa, minimium flexural strength 6.5 Mpa complete all as specified and directed. ( Make : SIKA/FOSROC or any other equivalent as approved by GE )

Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed.

M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.

M&L for use and waste of formwork to sides of sides and soffits of beams, lintels, floors etc. for rough finished concrete surfaces complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside to store in safe custody or for taking credit including making good of the disturbed surfaces, complete all as specified and directed.

Material and labour for point wiring (surface type) with PVC insulated FRLS(Fire Retardant Low Smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty)double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified and as directed.

All as per item No 130 above but for One 3/5pin 6 Amp Socket outlet on the same board with other switches complete all as specified and as directed.

All as per item No 130 above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and as directed.

All as per item No 130 above but for One call bell point controlled by one bell push switch complete all as specified as directed.

All as per item No 130 above but for one light point controlled by two 2 way switch complete all as specified and as directed.

Material and labour for point wiring (surface type) with PVC insulated FRLS (Fire Retardant Low Smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing caping (medium duty) double lock type, size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified and as directed.

Supply and fix switch piano flush button 6 Amp single pole, one way complete all as specified and as directed .

Supply and fix Switch socket combination 5 Pin, 6 Amp flush type complete all as specified and as directed..

Supply and fix socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.

Supply and fix switch socket combination 5A/16 Amp 5 pin flush type with complete all as specified and as directed.

Supply and fixing switch flush type, 6 Amps, single pole, two way complete all as specified and directed

Supply and fix lamp holder insulated body with back plate for angle/batten fittings complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and directed.

Chases cutting in brick / stone / concrete surfaces gitrh, exc 10 cms and not exc 20 cms for concealed wiring and the like, making the surface good to match the existing in CM 1:3, etc complete all as specified and directed.

Supply and fix bell push, flush type 6 Amps complete all as specified and as directed.

Supply and fix electronic fan regulator stepped type flush type AC 240 volt complete all as specified and as directed.

Supply and fix call bell, AC, 230 volt, single pole including taking down old unserviceable call bell complete all as specified and as directed.

Material and labour for sub-main wiring (Surface type) with two FRLS run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC casing capping of adequate size with fittings and accessories as required at site and taking down old sub main wiring with casing caping complete all as specified and as directed. (Note(i):Three run of 4.0sqmm copper conductor+One run PVC casing capping shall measured as one unit i.e RM)

Material and labour for sub-main wiring (Concealed type) with FRLS two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site and taking down old sub main wiring with casing caping complete all as specified and as directed. (Note(i):Three run of 4.0sqmm copper conductor+One run PVC conduit shall measured as one unit i.e RM) -(ii): Chases cutting shall be measured and paid separately this item)

Material and labour for sub-main wiring (Concealed type) with FRLS two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site all and taking down old sub main wiring with conduit as specified and as directed. (Note :(i) Three run of 6.0sqmm copper conductor+One run PVC conduit shall measured as one unit i.e RM) -(ii): Chases cutting shall be measured and paid separately this item)

Material and labour for sub-main wiring (surface type) with FRLS two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC casing caping including taking down old sub main wiring with casing caping all as specified and as directed. (Note:Three run of 6.0sqmm copper conductor+One run run Cassing-N-capping shall measured as one unit i.e RM)

Supply and fix powder coated sheet metal enclosure single pole & neutral for DBs (Double door) 4 way with 200 amps rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable enclosure one complete all as specified as directed.

All as per item No 151 here in above but for 8 way SPN DB complete all as specified and directed.

All as per item No 151 here in above but for 12 way SPN DB complete all as specified and directed.

Supply and fix of 4 way vertical type TPN DB in double door suitable for four pole MCCB as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed. Make: Havells Cat No. DHDLVDRWGOFO04/ LTVD04N of L&T/ INDOASIAN Cat No. 811888/ Equivalent Model of Makes specified in PS her-in-after.

Supply and fix MCCB four pole 63 amps, 240 volts, 16 KA, with all incoming / outgoing connections suitable for fix 4 way vertical type TPN DB in double door twith proper size of aluminium lugs complete all as specified as directed Make: Havells Cat No. IHLGNF0063 / INDOASIAN Cat No. 830006/ Equivalent Model of Makes specified in PS her-in-after.

Supply and fix sheet metal enclosure /TPN DBs (Double door) 4 way with 200 amps rated busbar suitable for MCB including taking down old unserviceable enclosure one complete all as specified as directed.

Supply and fix MCB triple pole & neutral 63 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections suitable for 4 way type TPN DB in double door (itrm no 36) with proper size of aluminium lugs complete all as specified as directed . Make Havells Cat No. DHMGCTNF063/ INDOASIAN Cat No. 811220/ Equivalent Model of Makes specified in PS her-in-after.

Supply and fix in repair, MCB triple pole & neutral 63 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections suitable for 4 way type TPN DB in double door (itrm no 36) twith proper size of aluminium lugs complete all as specified as directed . Make Havells Cat No. DHMGCTNF063/ INDOASIAN Cat No. 811220/ Equivalent Model of Makes specified in PS her-in-after.

Supply and fix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed.

Supply and fix, in repair, MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified and directed.

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified and directed.

Supply and fix in repair, MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified and directed.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I including taking down old earthing complete all as specified and directed.

Supply and fix GI wire as earth continuity conductor including taking down old unserviceable earth wire complete all as specified and as directed.

Supply and fix GI pipe 15 mm bore (dia), light-grade for protection of earth electrode including taking down old unserviceable GI pipe complete all as directed and as specified.

Supplying & fixing LED tube light fitting, 1 x 18 watt, 4 feet, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible cable copper conductor including taking down old unserceable light fitting complete all as specified and directed.

Supply and fixing LED building security light fitting 35 watt energy saving versatile pressure die-cast aluminium IP65 building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete including taking down old unserviceable light fitting complete all as specified and directed.

Supply and fix LED post top lantern with post top made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP 65 protection including 40 Watt LED lamp with all accessories and fixing in existing post including taking out old unserviceable/broken light fittings complete all as specified and as directed.

Material and labour for point wiring (concealed type) with PVC insulated FRLS(Fire reatrdant low smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way modular switch complete all as specified and directed. Note :(i)Cost of cutting of wall, if any, for housing of modular GI box and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of modular GI box of suitable module and suitable outer & inner combined cover plate shall be deemed to be included in the qouted rate.

All as per item No 169 here-in-above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches complete all as specified and directed.

All as per item No 169 here-in-above but for one 3/5 pin 6 Amps socket outlet on the independent board complete all as specified and directed.

All as per item No 169 here in above but for One call bell point control by one bell push switch complete all as specified as directed complete all as specified and directed.

All as per item No 169 here in above but for one light point controlled by two 2 way switch complete all as specified and as directed complete all as specified and directed.

Material and labour for point wiring (Concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified and directed. Note :(i) Cost of cutting of wall for housing of modular GI box, conduit and making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of modular GI box of suitable module and suitable outer & inner combined cover plate shall be deemed to be included in the qouted rate.

Supply and fix modular switch 1 way, 6 A, 1 module including modular white cover plate with frame complete all as specified and directed.

Supply and fix modular switch 1 way, 16A, 1 module including modular white cover plate with frame all as specified and as directed.

Supply and fix socket 6A 2/3 pin combined 2 module including modular white cover plate with frame all as specified and as directed.

Supply and fix socket 6A/16A, 2/3 pin combined 2 module including modular white cover plate with frame all as specified and as directed.

Supply and fix modular switch 2 way, 6 A, 1 module including modular white cover plate with frame complete all as specified and directed.

Supply and fix fan regulator modular type 120 W, 2 module complete all as specified and directed.

Supply & Fix Bell push switch designer modular type 1 module complete all as specified and directed.

Supply and fixing sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug socket and plug top 20 Amp complete with one single pole MCB 20 Amp complete all as specified and directed.

Taking down Geysers of any make/ model / type / capacity after disconnecting all electrical and water supply line for repair/ replacement of parts and components, refixing in old position after repair/replacement complete all as specified and as directed. Note:- i) The unit rate quoted is deemed to include for the labour element involved in replacing the spares as mentioned herein below. (ii) The spares replaced shall be measured and paid as supply only items herein below. (iii) The spares shall suit the exisiting makes of geyser or as per existing make of spares, as approved by the GE. Existing makes of Geyser:- Bajaj, Peon

Supply only Apparatus assembly plate ( 8/9 hole) for Geyser of 25 Ltrs / 50 Ltrs capacity (as per existing sample) complete all as specified and directed.

Supply only Thermostat straight stem type complete all as specified and directed. Make : Bajaj/ Elcon/Girish/EGO.

Supply only Heating Element 1500 watt suitable for Geyser of 25 Ltrs capacity Triangular/Round type complete all as specified and directed. Make : Bajaj / Rex/as per existing make

Supply only Indicating (Red/Green) lamp LED type (square/Round) button type for Geyser of 25/50 Ltrs capacity complete all as specified and directed.

Supply only PVC flexible cold water inlet pipe 15 mm dia 600 mm long complete all as specified and directed. Make : Make:- Prince / supreme / Prayag /Polytuf /. M/S Sak Plast Pvt Ltd.

All as per item No. 188 here-in-before but Hot water pipe ( Inlet wiremess type) complete all as specified and directed.

Supply and fix in repair of Chromium plated stop cock 15mm bore including taking out U/S cast copper alloy stop cock complete all as specified and as directed. Make:- Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) / Prayag. .

Supply and fix in replacement of round type 3 core incoming copper cable of size 2.5 sqmm for 25/50 Ltrs capacity Gyser complete all as specified and as directed. Make : Finolex / Havells / Plaza / Polycab / RR Kabel / HPL / C&S / Mescab.

Taking down carefully Ceiling Fans of any make, model and capacity from their existing places for servicing i. e. lubricating / Greasing and for rewinding / painting by dismantling the same and keep the blades, canopy, splitpin and other parts and components in safe custody and hanging / fitting on it's previous position after repair /rewinding / painting / replacement of spares etc complete all as specified and directed. Note:- i) The unit rate quoted is deemed to include for the labour element involved in replacing the spares as mentioned herein below. (ii) The spares replaced shall be measured and paid as supply only items herein below. (iii) The spares shall suit the exisiting makes of geyser or as per existing make of spares, as approved by the GE. (iv) Rewinding and painting shall be measured and paid separately. Existing makes :- Bajaj, Khaitan, Usha, Himadri

All as per item No.192 above but Exhaust fan,any make, Model and size complete all as specified and directed. Existing makes :- Orison, Garg Udyog

All as per item No.192 above , but wall mounted,any make, Model and size complete all as specified and directed. Existing makes :-Bajaj

Supply only GM Bush for ceiling fan 1200/1400 mm sweep complete all as specified and directed.

Supply only GM Bush for Exhaust Fan 230/300/350/450 mm sweep complete all as specified and directed.

Supply only Ball bearing (cat No. 6201) for ceiling Fan/Exhaust Fan complete all as specified and directed. Make:- SKF / NBC / Any other reputed make as approved by the GE,

All as per item No. 197 here-in-before but cat No. 6202 complete all as specified and directed.

All as per item No. 197 here-in-before but cat No. 6203 complete all as specified and directed.

Supply and fix in replacement capacitor 2.5 mfd, 220 volts complete all as specified and directed. Make:-Tipcon /Universal / Usha / Bajaj / CG /

All as per item No. 200 here-in-before but 3.0/4.0 mfd complete all as specified and directed.(Make:Tipcon/Universal)

Supply and fix in replacement of louver shutter for 300 mm sweep exhaust fan made of MS sheet folded type complete all as specified and directed. Make:- Orison, Garg Udyog

All as per item No. 202 here-in-above but for 450 mm sweep exhaust fan complete all as specified and directed. Make:- Orison, Garg Udyog

Material and labour for painting by spraying with synthetic enamel paint, first quality,glossy finish, to Ceiling Fans,any make, Model and size,including Blades/Down rods/ Canopy/Stand, Casing/ Cage and all accessories after preparation of surfce including thoroughly rubbing /cleaning old rusted spot complete all as specified and as directed. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.

All as per item No. 204 above but fo Exhaust Fans,any make, Model and size complete all as specified and directed.

All as per item No. 204 above but for wall mounted Fans,any make, Model and size complete all as specified and directed.

Material and labour for Rewinding of ceiling fans armature of 1200 mm/1400 mm sweep of any make & Model with replacing the burntout winding by new super enameled high grade copper wire of existing gauge and number of turns and all insulating materials including heat vernishing and testingcomplete all as specified and directed. Make of wire -Finolex / KEI / Havells / ICC / Devidayal / KEI / HPL / C&S / RR Kabel..

All as per item No. 207 here-in-before but for exhaust fan 230mm/ 300mm sweep, single phase, 230 volts complete all as specified and directed.

All as per item No. 207 here-in-before but for exhaust fan 450 mm sweep, single phase, 230 volts complete all as specified and directed.

All as per item No. 207 here-in-before but for wall mounted fans single phase, 230 volts complete all as specified and directed.

Supply and fix in replacement fan blades for exhaust fan of 300 mm sweep as per existing make and type complete all as specified and directed.

All as per item No. 211 here-in-before but for exhaust fan of 450 mm sweep complete all as specified and directed.

Material and labour in replacement of incoming twin core copper flexible wire of size 14/0.0076 from ceiling rose to ceiling fan / exhaust fans complete all as specified and directed.

Supply and fix in replacement 3 pin plug top 5 Ampsl fans complete all as specified and directed. Make : Anchor / Havells / Crabtree / C&S / HPL / Cona / Bajaj.

Supply and fix in replacement 3 pin plug top 15 Amps complete all as specified and directed. Make : Anchor / Havells / Crabtree / C&S / HPL / Cona / Bajaj.

Supplying & fixing LED tube light fitting of 2 feet long but replacing of the FTL fitting of 20 watt with energy saving LED luminarries fitting of 10 Watt including taking down old LED fitting complete all as specified and as directed.(Make : Bajaj / Havells / Century LED )

Material and labour for taking down Window type Air Conditioner of 1.5 TR ,cleaning by water , thoroughly, cleaning by caustic and re-washing with plain water, Servicing. greasing, vacuuming, taking out defective parts / spares, replacing of spares required, and connecting all electrical and gas pipe connection, and refixing at same location with proper arrest of leakage and commissioning , etc complete, all as directed by the Engr-in-Charge. Existing Makes:- LG / Videocon / Voltas / Samsung / Blue Star. Notes:- (i) The spares listed herein after shall be measured and paid as supply only. The spares supplied shall be of existing make, or shall suit the existing make of spare, duly approved by the GE. (ii) The labour element involved in replacing the spares is deemed to include in the quoted rate. (iii) Filling of gas shall be measured and paid seperately, under supply only. (iv) Cost of any other spares / minor spares, not specified here in after, and the spares like nut bolts washers etc shall be deemed to be included in the unit rate quoted. (v) Rewinding shall be measured and paid separately under relevant items. (vi) The decission of GE shall be final and binding. (vii) The contractor shall take cognizance of the above aspects and quote the unit rate.

All as per item No. 217 above but for split type AC of 1.5 ton capacity complete all as specified and directed.

Supply only hermitically sealed rotary compressor unit including leak testing vacumising pressure tesing complete suitable for window type AC of capacity 1.5 TR complete with refrigerator complete all as specified and directed. Make of compressor:-Tecom / Sriram / Kirloskar / LG / Voltas). Make of Existing AC:- LG / Videocon / Voltas / Samsung / Blue Star.

All as per item No. 219 above but for split type AC 1.5 TR complete all as specified and directed.

Rewinding of blower motor with super enameled copper conductor for 1.5 TR Window / Split type AC (Gauge and size of conductor as per existing one) including heat vernishing and replacing the all insulating materials and bush / bearing complete all as specified and directed. Make of winding wire:- KEI / Finolex / RR Kabel / HPL / ICC / Devidayal / Polycab.

Rewinding of condensing fan motor with super enameled copper conductor for 1.5 TR Window / Split type AC (Gauge and size of conductor as per existing one) including heat vernishing and replacing the all insulating materials and bush / bearing complete all as specified and directed. Make of winding wire:- KEI / Finolex / RR Kabel / HPL / ICC / Devidayal / Polycab.

Supply and filling of Gas charging with R-22 refrigerant by detecting and rectifying leaks on condensor, evaporator and pipe lines by brazing /welding with the same by making it. confirm with N2 pressure testing and flushing the system with liquid nytrozen, dehydration and evacuation the system including replacement of drier and capilliary tube all as directed and specified for window type AC/split type AC of capacity 1.5 TR complete all as specified and directed.

Supply only starting capacitor for Window / Split type AC 1.5 TR capacity 50-120 mfd 440 volts, etc complete all as specified and directed. Make : Universal / Usha / Sarada / Asian.

Supply only running capacitor 50-120 mfd 440 volts for window / Split type AC 1.5 TR capacity, etc complete all as specified & directed. Make : Universal / Usha / Sarada /Asian.

Supply and fix in replacement of electronic PCB / sensor board for window type AC 1.5 TR capacity as per existing Make / Model of AC LG/Samsung/Videocon complete all as specified and directed.

Supply and fix in replacement of electronic PCB / sensor boardr for split type AC Indoor unit, 1.5 TR capacity Make Samsung/LG/voltas complete all as specified and directed.

S & F in repair Copper Condensor,Window AC 1.5 TR connected to Aluminium Fins, complete all as specified and directed.

All as per item No. 228 above, but for Split type AC of capacity 1.50TR complete all as specified and directed.

Kanta International

RADHA ENTERPRISE

CHOWDHURY SMALL INDUSTRIES

PUJA ELECTRICALS

S C ROY AND CO

SEN ELECTRIC WORKS

KAY BEE ASSOCIATES