Loading
Loading…
Loading…
Tender Value
₹3.6 L
EMD Value
₹4,500
Closing Date
14 Oct 2026, 5:00 pm6d left
ACE Govindpur area
GM office, Bilbera sonardih
Repair and maintenance of Haulage room and bike stand at 1 seam NAKC colliery office under Govindpur Area
2026_BCCL_366506_1
BCCL/AR III/GM/ACE/E-NIT/ 26-27/96/4188-4213
Open Tender
Civil Works - Others
Percentage
28 days
Govindpur area
Please refer Tender documents.
2 documents required · 2 mandatory
₹4,500
5 Oct 2026
5 Oct 2026
16 Oct 2026
5 Oct 2026
14 Oct 2026
5 Oct 2026
5 Oct 2026 - 14 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | Civil work | - | - | - | - |
| 3 | 12 mm cement plaster of mix :
1:6 (1 cement: 6 fine sand) | 55.43 | m2 | 222 | ₹12,305.46 |
| 4 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer
applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. sqm 70.8
Old work (one or more coats @ 2.20 kg/10 sqm) complete | 82.16 | m2 | 46.4 | ₹3,812.22 |
| 5 | White washing with lime to give an even shade :
Old work (one or more coats) | 89.59 | m2 | 8.95 | ₹801.83 |
| 6 | Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in
superstructure above plinth level up to floor five level in :
Cement mortar 1:6 (1 cement : 6 coarse sand) | 2.95 | m3 | 6,190.9 | ₹18,263.16 |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture of required
colour to give an even shade :
One or more coats on old work | 4.5 | m2 | 68.3 | ₹307.35 |
| 8 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7
microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.
Sheet should have protective guard film of 25 microns minimum to avoid scratches during
transportation and should be supplied in single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size
(5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved
surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and
shape wherever required. | 241.26 | m2 | 546.2 | ₹1,31,776.21 |
| 9 | P/F 25 mm ps flooring 1:2:4 | 135.3 | m2 | 325.23 | ₹44,003.62 |
| 10 | Removing white or colour wash by scrapping and sand papering and preparing the surface
smooth including necessary repairs to scratches etc. complete | 26.88 | m2 | 12.05 | ₹323.9 |
| 11 | Demolishing brick work manually/ by mechanical means including stacking of serviceable
material and disposal of unserviceable material within 50 metres lead as per direction of
Engineer-in-charge in cement mortar | 18.6 | m3 | 1,232.8 | ₹22,930.08 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.60 MB
BOQ_379441.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .