Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC 676301 | MALAPPURAM | KERALA | 676301 | L1 | Accepted-AOC Accepted Vide Resolution of VAttamkulam GP | |
| 2 | L2₹1.6 L+₹6,188 (4.14%)Rejected-AOC | L2 | Rejected-AOC Higher rate and hence not admitted |
Tender Value
₹1.5 L
EMD Value
₹3,634
Closing Date
19 Mar 2024, 6:00 pmClosed
Assistant Engineer
LIDEW Vattamkulam GP
Annual Plan_Vattamkulam GP _Proj_No_SO239_24_Kattil DWSS_General Electrical Work
2024_LSGD_668519_1
ET5/AE/LIDEW/VTKM/2023-24
Open Tender
Electrical Works
Item Rate
180 days
LIDEW Vattamkulam GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹3,634
Yes
9 Oct 2024
11 Mar 2024
20 Mar 2024
11 Mar 2024
19 Mar 2024
11 Mar 2024
Amount
Electrification
90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)
90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board
OD381363/2023-2024:Supply and fixing phase indication lamp (led) blue on existing board and giving connection
OD381364/2023-2024:Supply and fixing phase indication lamp (led) red/yellow on existing board and giving connection
OD404712/2023-2024:Supply and fixing 32A TPN SDF with sheet steel enclosure and HRC fuses on existing board and giving connection as required
2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
OD404862/2023-2024:Supply and fixing L&T make MUG-6 DOL starter,relay range,9-14 A ,cat NO,SS97756 COVO consisting of volt meter,/ ammeter/single phasing cum dry run preventor etc suitable for 5 HP submersible motor pumpset on existing board and giving connection as required
90.14.24.17:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.
OD404925/2023-2024:Supply and providing digital multi function meter to readV,A,F,3phase accuracy class 0.5 in the existing panal board and giving connection as required
OD409226/2023-2024:Supply and providing 50/5 A,75/5 A,5 VA accuracy class 3 tape wound metering CT and giving connection as required,
OD404920/2023-2024:Supply and fixing TPMCB sheet steel enclosure on surface and giving connection as required
OD404711/2023-2024:Supply and fixing 6/10 A DPMCB on existing board and giving connection as required
2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
OD404919/2023-2024:Supply and fixing dust and vermin proof 3phase syntex meter board GSMB 6535 as required
OD404918/2023-2024:Supply and providing32A HRC fuse link with base and giving connection in the existing meter board
OD404917/2023-2024:Supply and providing 32A neutral link mounted on DMC/SMC base and giving connection in the existing meter board
5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
OD404923/2023-2024:Supply and fixing 2*25*5 mmGI strip test joint for earthing
OD404924/2023-2024:Supply and fixing25mm*3mm GI Strip earth lead from test joint to earth plate
OD404922/2023-2024:Supply and providing superior quality brass bolt with hexagonal/square head ,nut and washers for the following size etc as required 25*6 mm
90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm
90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm
90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm
1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm
90.6.6.2:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.2.50 sq mm
90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)
90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)
90.12.24.2:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.4 sq mm
OD404916/2023-2024:Supply and providing pvc reducer 63/ 50mm
OD404921/2023-2024:Supply and providing pvc socket ( FTA) 50mm
OD413281/2023-2024:Supply and providing ISI marked 50 mm PVC Pipe(10 kg/cm2) as delivery pipe
OD413279/2023-2024:Supply and providing 50mm pvc bend on delivery pipe as required
OD413280/2023-2024:Supply and providing 50mm PVC UNION on delivery pipe as required
90.17.8.4:Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :50 mm
OD413889/2023-2024:Supply and providing 50mm brass non return valve as required
OD413883/2023-2024:Charges for preparation of KSEB Test report for submitting to the concerned KSEB Section office
OD381369/2023-2024:Supply and providing suitable iron clamp with nut and bolt at top of the well
OD413958/2023-2024:Supply , installation testing and commissioning of new 5HP borewell submersible motor pumpset suitable for 150mm borewell with 5HP,3phase,50Hz ,380/415V, 2800rpm, 70/118/143 MT head, 9600/7200/5200 liter/hour discharge HRF 19/25 TEXMO or equivalent make of CRI/DECCAN/KIRLOSKER /V GUARD delivery size of 50mm or nearest using chain pully block trpole ,leackproof materials as required and suspended on existing rope including fixing GI/column pipe as delivery pipe ,lowering upto bottom of well at required water level with necessary supports at both ends of motorpumpset ,giving all electrical connections and conducting trial run at full load satisfactorily
OD414483/2023-2024:Supply and providing polymer braided twisted cord twin rope string (12mm) for hanging motor pump set
OD414789/2023-2024:Supply and providing 50mm gate valve (brass) on delivery pipe as required
OD414790/2023-2024:Supply ,and laying good quality HD PE pipe(ISI marked) 50mm and giving connection using leack proof materials as required
OD416192/2023-2024:Supply and providing HD Collar 40/50mm
FAHADU M
Bidder Name
AK ELECTRICALS
FAHADU M
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1039419.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .