Kerala

AOC

Works

Civil Works - Buildings

347/25-26Poovathussery Subcentre Maintenance ward-13

Local Self Government Department

Parakkadavu | Ernakulam, Kerala

Amount: ₹4.9 LCloses: 16 Oct 2025Closed

Timeline

Published9 Oct 2025
Closed16 Oct 2025
Awarded15 May 2026

Bids

Item Rate

3 Bids15 May 2026

#	Company	Amount	Rank	Status
1	POLYVARGHESE L1₹4.7 LAccepted-AOC	₹4.7 L	L1	Accepted-AOC L1
2	K O POLY Rejected-Technical	-	-	Rejected-Technical L3
3	S P thomas Rejected-Technical	-	-	Rejected-Technical L2

BoQ Comparative

Line Items (18)

Sl No	Description	Qty	Unit	S P thomas L3	POLYVARGHESE L1	K O POLY L2
1.00Aluminum Work
1.00	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	0.17	cum	7,713.54 ₹1,272.73	7,405 ₹1,221.83 Lowest	7,712.77 ₹1,272.61
1.00	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	2.4	sqm	369.76 ₹887.42	354.97 ₹851.93 Lowest	369.72 ₹887.33
1.00	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	2.4	sqm	80.85 ₹194.04	77.62 ₹186.29 Lowest	80.84 ₹194.02
1.00	13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)	2.4	sqm	122.44 ₹293.86	1,194.24 ₹2,866.18	122.43 ₹293.83 Lowest
1.00	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	506.92	kg	584.72 ₹2,96,406.26	561.33 ₹2,84,549.4 Lowest	584.66 ₹2,96,375.85
1.01	21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)	54	kg	708.24 ₹38,244.96	640.25 ₹34,573.5 Lowest	708.17 ₹38,241.18
1.01	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	37.02	sqm	1,278.82 ₹47,341.92	1,227.67 ₹45,448.34 Lowest	1,278.69 ₹47,337.1
1.01	OD187369/2025-2026:Providing and fixing 3 mm thick Hylam sheet both side laminated in panelling fixed in aluminum doors,<br>windows shutters and partition frames with C.P. brass stainless steel screws etc. complete as per<br>architectural drawings and directions of Engineer - in- Charge.<br>laminated Hylam sheet with decorative lamination on both sides	29.7	sqm	1,366.07 ₹40,565.45	1,440 ₹42,760.8	1,365.93 ₹40,561.29 Lowest
1.01	17.7.4:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap	1	each	2,106.24 ₹2,106.24	1,935.36 ₹1,935.36 Lowest	2,106.03 ₹2,106.03

Tender Value

₹4.9 L

EMD Value

₹12,263

Closing Date

16 Oct 2025, 5:00 pmClosed

Tender Inviting Organisation

Name

Asst.Engineer

Address

Asst.Engineer, LSGD,Parakkadavu GP

Work Description

Maintenance

Tender Information

Tender ID

2025_LSGD_806929_1

Reference Number

24/AE/LSGD/PKDV/2025-26

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

180 days

Location

Parakkadavu

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredScanned copy of Duly filled and signed bid submission form (.pdf)

Requiredcopy of Preliminary agreement duly filled and signed by the contractor (.pdf)

RequiredScanned attested copy of contractors registration certificate and GST registration certificate (.pdf)

RequiredScanned copy of Affidavit duly filled and signed by the contractor. (.pdf)

RequiredScanned copy of Duly filled and signed requisition form for epayment and format for Integrity Pact (.pdf)

RequiredSBD duly digitally signed by contractor (.pdf)

RequiredTender Schedule (should be rounded to two decimals, others will be rejected) (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,085

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹12,263

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

15 May 2026

Published

9 Oct 2025

Bid Opening

18 Oct 2025

Download Starts

9 Oct 2025

Download Ends

16 Oct 2025

Submission Starts

9 Oct 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1346207.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

AFFIDAVIT.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

POLYVARGHESE

L1₹4.7 LAccepted-AOC

K O POLY

Rejected-Technical

S P thomas

Rejected-Technical

Sl No	Description	Qty	Unit	S P thomas L3	POLYVARGHESE L1	K O POLY L2
1.00Aluminum Work
1.00	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	0.17	cum	7,713.54 ₹1,272.73	7,405 ₹1,221.83 Lowest	7,712.77 ₹1,272.61
1.00	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	2.4	sqm	369.76 ₹887.42	354.97 ₹851.93 Lowest	369.72 ₹887.33
1.00	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	2.4	sqm	80.85 ₹194.04	77.62 ₹186.29 Lowest	80.84 ₹194.02
1.00	13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)	2.4	sqm	122.44 ₹293.86	1,194.24 ₹2,866.18	122.43 ₹293.83 Lowest
1.00	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	506.92	kg	584.72 ₹2,96,406.26	561.33 ₹2,84,549.4 Lowest	584.66 ₹2,96,375.85
1.01	21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)	54	kg	708.24 ₹38,244.96	640.25 ₹34,573.5 Lowest	708.17 ₹38,241.18
1.01	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	37.02	sqm	1,278.82 ₹47,341.92	1,227.67 ₹45,448.34 Lowest	1,278.69 ₹47,337.1
1.01	OD187369/2025-2026:Providing and fixing 3 mm thick Hylam sheet both side laminated in panelling fixed in aluminum doors,<br>windows shutters and partition frames with C.P. brass stainless steel screws etc. complete as per<br>architectural drawings and directions of Engineer - in- Charge.<br>laminated Hylam sheet with decorative lamination on both sides	29.7	sqm	1,366.07 ₹40,565.45	1,440 ₹42,760.8	1,365.93 ₹40,561.29 Lowest
1.01	17.7.4:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap	1	each	2,106.24 ₹2,106.24	1,935.36 ₹1,935.36 Lowest	2,106.03 ₹2,106.03

Sl No

Description

Qty

Unit

S P thomas

POLYVARGHESE

K O POLY

1.00Aluminum Work

1.00

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

0.17

cum

7,713.54

₹1,272.73

7,405

₹1,221.83

Lowest

7,712.77

₹1,272.61

1.00

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

2.4

sqm

369.76

₹887.42

354.97

₹851.93

Lowest

369.72

₹887.33

1.00

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

2.4

sqm

80.85

₹194.04

77.62

₹186.29

Lowest

80.84

₹194.02

1.00

13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

2.4

sqm

122.44

₹293.86

1,194.24

₹2,866.18

122.43

₹293.83

Lowest

1.00

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

506.92

584.72

₹2,96,406.26

561.33

₹2,84,549.4

Lowest

584.66

₹2,96,375.85

1.01

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

708.24

₹38,244.96

640.25

₹34,573.5

Lowest

708.17

₹38,241.18

1.01

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

37.02

sqm

1,278.82

₹47,341.92

1,227.67

₹45,448.34

Lowest

1,278.69

₹47,337.1

1.01

OD187369/2025-2026:Providing and fixing 3 mm thick Hylam sheet both side laminated in panelling fixed in aluminum doors,<br>windows shutters and partition frames with C.P. brass stainless steel screws etc. complete as per<br>architectural drawings and directions of Engineer - in- Charge.<br>laminated Hylam sheet with decorative lamination on both sides

29.7

sqm

1,366.07

₹40,565.45

1,440

₹42,760.8

1,365.93

₹40,561.29

Lowest

1.01

17.7.4:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

each

2,106.24

₹2,106.24

1,935.36

₹1,935.36

Lowest

2,106.03

₹2,106.03