SPECIAL REPAIRS TO MCPOs CPOs MARRIED ACCOMMODATION BLDG No P13 AND SERVANT QUARTERS BLDG 236 UNDER GE I NAVY JAMNAGAR

Amount

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of debris to a distance exceeding 500 mts and depositing where directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick above or below ground level and removal of debris to a distance exceeding 500 mts and depositing where directed.

Demolition of cement reinforced concrete of any descritpion and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition)and removal of debris to a distance exc 500 mtr but not exc 2 km and depositing where directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of debris to a distance exceeding 500 mts and depositing where directed.

Demolition and breaking up old broken drain pipes (Salt glazed ware, AC, CI, Vent pipe or Reinforced concrete) of 100/110 mm bore including accessories set in cement mortar and removal of debris to a distance exceeding 500 mts and depositing where directed.

Demolition and breaking up old broken drain pipes (Salt glazed ware, AC, CI, Vent pipe or Reinforced concrete) of 75 mm bore including accessories set in cement mortar and removal of debris to a distance exceeding 500 mts and depositing where directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) of 150 mm internal dia set in cement mortar including bedding and haunching.

Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of debris to a distance exceeding 500 mts and depositing where directed.

Dismantling of AC Corrugated or semi corrugated sheet etc any thickness including ridges as in roof covering and stacking at site where directed and removal of debris to a distance not exceeding 500 mtr and depositing where directed complete all as directed.

Dismantling boarding, any descrition fixed in any position with nails complete all as directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.

All as per item 11 here-in-above but exceeding 1.5 Sqm but not exceeding 4 Sqm each

Taking down shutter of any description n.exc 1 Sqm each and stacking at site where directed.

All as per item 13 here-in-above but exceeding 1 Sqm but not exceeding 2 Sqm each

Cutting holes in brick works of size not exc half brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required including making good as per its original specification with out any extra cost complete all as directed.

M&L pre-cast PCC 1:3:6 type C1 (using 20 mm graded granite aggregate) as in block masonry with factory made solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified.

Providing precast ce- ment concrete Type B1 1:2 :4 using 20 mm graded crushed stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry),string courses, copings. kneelers, apex stones, pier caps, columns, posts , boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets,etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match Set in cement mortar 1:4 complete all as directed.

M&L for RCC 1:11/2:3, type A1 (using 20 mm graded granite stone aggregate) as in landing, canopies, Chajjas, deck slabs and in shelves and the like. Note: Reinforcement shall be measured and paid separately.

Use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges fair finished of concrete flat complete all as directed.

Use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges rough finished surfaces complete all as directed.

Supply only Integral Water Proofing Compound (ISI Marked)of Make : CICO , Acco Proof , Impermo , Aqua flex as approved.

Cutting chases in brick/ stone wall, pinning in, making good to facing where required and pointing in CM 1:3 to ends of edges of landing, steps, cills, lintels etc and cutting chases not exceeding 10 cm girth for concealed water tubing and making good cutting as per its original specfication complete all as directed.

S&F Second class hard wood factory made kiln - seasoned, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed in position complete all as directed.

S&F 35 mm thick second class hard wood factory made plain framed panelled door shutter (any number of panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12mm thick veneered particle boards with commercial veneering on both face the size of rail and style as per IS - 1003 (Part I) kiln seasoned and chemically pressure treated and fixed to chowkats complete all as directed.

S &F 35 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a) supplied and fitted to chowkats.

All as per item No 37 here-in-above but divided into squares, with plain chamfered or rounded, mitred and ribeted sash bars any numbers as in window shutter 30 mm thick all as specified in SSR Part I Sec 8 Clause 8.24 (b).

S&F factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per Specification & drawing.

S&F 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balacing white lamination, fixed with screws to timber frame work including external teak wood lipping, 6mm thick fixed with nails complete all as directed.

S&F 19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work including external teak wood lipping, 6mm thick fixed with nails complete all as directed.

S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.

S&F small fittings such as brackets of any type latch and hinge block, shaped door window stops and the like in second class hard wood article not exc 200 cu.cm each.

S & F 150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S & F 200 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S&F 75 mm size butt hinges, medium weight cold rolled mild steel and fixed .

S&F 100 mm size butt hinges, medium weight cold rolled mild steel and fixed .

S&F 100 mm size butt hinges, medium weight cold rolled stainless steel and fixed .

S&F 100 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S&F 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S&F 125 mm size aluminium alloy handles (ISI Marked) cast type anodised and fixed.

S & F 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 300 mm size mild steel ordinary rat tail rod pattern springs in-cluding roller and roller plate complete all as directed.

S&F 75 mm size double legged with rubber shoe floor door stopper of aluminium alloy body fixed in floor complete all as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (when open) 30 mm

S&F 100 mm hasp and staple, safety type of aluminium, anodised, including bolts to hinge type, fixed with screws complete all as specified.

S&F gate and shutter, hooks and eyes, aluminium plate type II, 150 mm size.

S&F in repairs magnet lock for kitchen cabinet complete.

S&F 20 mm dia stainless steel, curtain rods with brackets, stops, rollers and finials complete all as directed.

S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed.Make : Prayag Cat No BA -20 or equivalent as approved.

S&F XPM design aluminium alloy wire mesh, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples along with wooden beads.

S&F in repair XPM design aluminium alloy wire mesh, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples along with wooden beads.

S&F mild steel bands, straps, supports or stays for rainwater, hold fasts; wall ties; and similar small articles steel conforming to Fe-290 Gde-E-165.

M&L framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F mild steel work in framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165.

S & F 10 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All same as per item No. 54 here-in-above but 6 to 8mm dia bar - do -

S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frames for sliding windows (three track) and ventilator shutters including frames, glazing clips, cleats etc including jointing cleat for fixing complete all as directed.

S&F anodised aluminium powder coated (thickness or powder coating not less than 50 micron) for doors, windows and ventilator shutters, with or without sash bars, aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws for fixing glass etc. complete all as directed. Note: Glass shall be measured and paid separately.

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed in roof, wall etc., fixed with L-type or J-type or cranked hook bolts in lieu of screw.

Taking down any type of treatment in any descriptions i.e over roof slab , parapat , chimney etc and in any height upto three storey Bldg height including cleaning of surface with wire brushes and water removing of unsolvent materials and depositing of the same as directed at a distance not exceeding 50m and provide the treatment by under mentioned stages :- (i) provide cement slurry @ 3kg /Sqm to the finished surface (ii) 10 mm thick screed bed/ bedding layer in CM 1:3 mixed with Water Proofing Compound (WPC) as per manufacturer instructions including finishing the surface fair and even on RCC roof/ parapet (iii) Once bedding layer of concrete is completely dried provide PCC 40 mm thick 1:2:4 type B1 to entire surface as directed. (iv) apply oil bound bituminous primer @ 0.30 Kg/Sqm & Provide 4mm thick APP modified water proofing polymeric membrane weighing not less than 4.00 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160 gms/Sqm rolled by torch application over including minimum lap 75 mm on longitudinal direction & 100 mm on the traverse direction by thermo-fused torch flame application method and finally finished the top surface with two coats of thermal resistant paint complete all as specified and as directed. Note: (i) The quoted rate is deemed to be inclusive of taking down & removal of debris , 10 mm thick 1:3 screed, WPC , 40 mm thick PCC & APP treatment complete treatment. (ii) The work shall be carried out only through manufacturer or their authorised applicator and a written guarantee for work shall be submitted by the manufacturer for the effectiveness of WPT

M&L for 75 mm thick plain cement conctere 1:3:6, type C1 using 20 mm graded crushed stone aggregate as in plinth protection, hard standing finished the surface even and smooth using extra cement complete all as directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in floor and finished the surface suitable to receive floor tiles complete all as directed.

M&L 18-20 mm thick granite slab (of any quality) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin counter and like set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M & L non-skid coloured ceramic tiles of size 600x600x 9 to 10 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified.

All same as per item No. 63 here - in - above but as in dado & skirting with 10 mm thick 1 : 4 cement mortar screed - do -

M & L non-skid coloured ceramic tiles of size 300x300x7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified.

All same as per item No. 66 here - in - above but as in dado & skirting with 10 mm thick 1 : 4 cement mortar screed - do -

M&L glazed ceramic coloured tiles of size 600x300x7 to 8 mm thick, on verticals surfaces, set and jointed inneat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed. (Note for item Nos 63 to 68 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Colour of tiles shall be got appproved before incorporation in the work)

Rounding to edges of marble, granite slabs of any type on one edge, such as in steps, cooking platform, and other similar situations.

M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with WPC as per manufacturer instruction , and finished the surface even and smooth without using extra cement) complete all as specified and directed. (Note : WPC measured and paid separately).

M&L for rendering 15 mm thick in CM 1:6 on stone or block masonry surfaces or surface other than fair faces brick work, finished even and smooth without using extra cement complete all as specified.

M&L for rendering 10 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces on ceiling, chhajjas, facia of chhaja, finished fair and even complete all as specified.

M&L Three coats of white wash on newly plastered surface of wall after necessary preparation of surface complete all as directed.

M&L Three coats of white wash on newly plastered surface of ceiling after necessary preparation of surface complete all as directed.

M&L preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or unplastered surfaces) and applying one coat of white wash complete all as directed.

M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a 3 mm thick white cement based wall care birla putty complete all as specified.

M&L complete removal of existing treatment and preparing old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a 3 mm thick cement based wall care putty complete all as specified.

M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of 1 mm thick white cement based wall care putty complete all as specified.

M&L complete removal of existing treatment by scrapping and preparing old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a two coats of thin layer of cement based wall care putty complete all as directed.

M&L preparing newly plastered or unplastered surfaces of exterior walls and applying two coats of antifungal exterior emulsion weather proof paint (Apex) over a coat of alkali resistant primer complete all as specified.

M&L complete removal of existing treatment and preparing old plastered or unplastered surfaces of exterior walls and applying two coats of antifungal exterior emulsion weather proof paint (Apex ) over a coat of alkali resistant primer and 0.5 mm thick wall putty as approved complete all as specified.

Hacking out old broken glass (any thickness) and size from wooden frame glazed with putty or fixed with wooden beads and removal of debris to a distance n.exc 50 mtr and depositing where directed.

Hacking out old broken glass (any thickness) and size from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones and removal of debris to a distance n.exc 50 mtr and depositing where directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

S&F 4mm thick figured glass, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

M & L Two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed.

M&L for one coat of first quality synthetic enamel paint of any description over 10 cm in width or girth on old painted wooden surface after necessary preparation of surface complete all as directed.

M & L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as directed.

M&L for one coat of first quality synthetic enamel paint of any description over 10 cm in width or girth on old painted steel surface after necessary preparation of surface complete all as directed.

Taking up or down 15 mm bore steel tubing including connections, including cleaning for re-fixing or removal to store.

Taking up or down 20 mm bore steel tubing including connections, including cleaning for re-fixing or removal to store.

M & L for 15 mm bore galvanised iron water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors complete all as directed.

M & L for 20 mm bore galvanised iron water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors complete all as directed.

S&F in repairs 15 mm bore bib taps, fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed. Make: Prayag 7808 or equvalent in approved make.

S&F in repairs 15 mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down highpressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as directed. Make: Prayag Cat No. 7802

S&F in repairs 15 mm bore two way bib taps, chromium plated, with 1.2 mtr brass flexible tube and wall hook mounted type for EWC. Make : Prayag Cat No 7812 or equivalent as approved.

S&F in repairs 15 mm bore stop valve fancy type, cast copper alloy, chromium plated, with long shank and cup (concealed type) screwed down high pressure with cruntch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified. Make: Prayag Cat No. 7818 or equivalent in approved make.

S&F in repairs 15 mm bore angle stop valve with cup, fancy type, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as directed. Make: Prayag Cat No. BS 65 or equivalent in approved make.

S&F in repairs brass chromium plated shower rose 125 mm dia with or wihout swivel joint, any size, including fixing to steel pipe or union.Make : Prayag Cat No 7812 or equivalent as approved.

S&F in repairs CP brass soap dish, fixed to walls with CP brass screws complete. Make: Prayag Cat No BA 05 or equivalent in approved makes

S&F in repairs PVC connection 15mm bore and 45cm long with two Nos of brass check nuts and washers complete all as directed.

S&F in repairs Gun metal gate or gate valves with iron wheel head screwed box and both ends for iron pipe for 15 mm bore of pipe or union complete all as directed.

S&F in repairs Gun metal gate or gate valves with iron wheel head screwed box and both ends for iron pipe for 20 mm bore of pipe or union complete all as directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as directed.

S & F 75 mm bore size PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as directed.

S & F 110 mm bore size PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as directed.

S&F PVC (SWR) Vent cowl 75 mm bore size fixed complete all as directed.

S&F PVC (SWR) Vent cowl 110 mm bore size fixed complete all as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F SWG gully trap size 150 x 150 square or round monted type 'S' setting and jointed with solvent cement complete all as directed.

S&F in repairs 75 mm dia of outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as directed.

S&F 75 mm diameter of outlet PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as directed.

S&F in repairs 550 mm x 400 mm size white flat back, vitreous china wash hand basin including cutting for and pinning ends of brackets or erecting stand, waste coupling & waste pipe complete all as directed. Make : Prayag Cat No 4642 or equivalent as approved.

S&F in repairs 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or 32 mm dia PVC connection pipe complete all as directed. Make : Prayag Cat No 501 or equivalent as approved.

S & F in repairs Vitreous china squatting pan "Orissa pattern" long pan of size 580 x 440 mm white with integral foot rest but (excluding flushing cistern and flush pipe ) including connection to trap and flushing pipe anti syphonic pipe etc including trap set in and necessary lean cement concrete complete all as directed.

S & F in repair Vitreous china wash down water closet pan (Pedestal pattern) white (ETWC) complete including plastic water closet seat cover with brass screws, but excluding flushing cistern and flush pipe complete.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 50 cm long complete all as specified and directed. Make : Prayag Cat No BEA 45 or equivalent as approved.

S&F corner glass shelf with 01 racks complete

Taking down any type & size of damaged sink & S&F new sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 510mm x 430mm bowl size 430mm x 380mm x 203mm complete all as directed. Make : Prayag Cat No 1218D or equivalent as approved.

Taking down any type & size of damaged sink and S&F new sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 405mm x 354mm x 203mm complete all as directed .Make : Prayag Cat No 1239d or equivalent of Jayna , Nirali, Franke, Parryware, Neelkanth, Diamond

S&F in repairs corrosion resistant Stainless Steel rack of size 30''x42''x10'', made of 0.80 mm thick stainless steel sheet, wall mounted type complete all as directed. Make: Bharat Glosssy finish SS Kitchen Rack 30x42- KR 30x42 or equivalent in Jayna, Nirali, Franke, Parryware, Neelkanth, Diamond.

S&F in repairs kitchen plate rack made out of stainless steel 0.50 mm thick sheet with partitions and rack 800 x 250x 900 mm with shape and pattern as per sample kept in sample room of GE Office complete all as directed.

Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site and S&F new 500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer (ISI Marked) colour white both inside and outside with top cover including PVC float valve high pressure suitable for 20 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.

Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site and S&F new 1000 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer (ISI Marked) colour white both inside and outside with top cover including PVC float valve high pressure suitable for 20 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.

M&L 150 mm internal dia. salt glazed stone ware drain pipes laid in trenches and jointed in CM 1:3 as specified.

M & L for concrete bed in PCC 1:3:6 type C2 using 40 mm graded stone aggregrate to 150 mm bore drain pipes including packing and haunching completely surrondings of the pipe after they are laid and tested complete all as specified and directed. .

M&L forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A'

S&F Providing Kitchen cabinet with shutter complete in required sizes made out of 18 mm thick one side decorative lamination & other side white balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters and panels made out of 18 mm thick one side decorative laminated PVC sheet all brackets 5.5 mm screws etc. All the edges shall be covered with 2 mm thick edge bonding tape of 90 degree edge bend finish as per make and specification mentioned as per drawing and specification approved by Engineer-in-Charge complete all as specified.

All same as per Sl No. 131 here-in-above, but both sides white lamination.

S&F stainless steel L hinges.

S&F stainless steel handles 100 mm long fabricated type, bright polished decorative type fixed with brass screws.

S&F magnetic catcher

E&M WORKS: Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody for re-use at site and making good disturbed surfaces of walls, floors, etc to match with the existing surface complete all as directed.

M & L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including PVC rigid non metalic conduit /casing and caping with all fittings such as internal bend, end caps etc fixed on the surface of wall, ceiling, roof, steel structure etc. by means of suitable fixing accessories, with GI pressed steel / PVC box suitable for modular switches sunken boxes (with earth dolly) covered with logic modular PVC sheet cover for fixing of switches, sockets etc including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:- NOTE: - Switch and socket to be measured and paid for separately. (a) One light point controlled by one 5/6 amps one way switch.

(b) One Socket outlet, three/five pin, 6 Amp, controlled by one 5/6 amps one way switch or switch/socket combination 6 amps, 5 pin on same board with other switches, sockets, fan regulators, etc.

(c) One Socket outlet, three/five pin, 6 Amp, controlled by one 5/6 amps one way switch or switch/socket combination 6 amps, 5 pin on independent board.

All as per item No. 139 here-in-above but with 2.5 Sqmm cables for one 16Amps , 6-Pin socket outlet point on independent board .

S&F in repairs switch modular type single pole one way 6 Amp with all accessories complete all as directed. Make: Legrand Cat No. 6755 01 or equivalent in Philips / Crabtree / ABB / Havells

S&F in repairs switch modular type single pole one way 16 Amp with all accessories complete all as directed. Make: Legrand Cat No. 6755 11 or equivalent in Philips / Crabtree / ABB / Havells

S&F in repairs socket outlet 3 Pin 6 Amp modular type all accessories complete all as directed. Make: Legrand Cat No. 6755 52 or equivalent in Philips / Crabtree / ABB / Havells

S&F in repairs socket outlet multipurpose 2/3 Pin for 6 / 16 Amp modular type with all accessories complete all as directed. Make: Legrand Cat No. 6755 55 or equivalent in Philips / Crabtree / ABB / Havells

S&F bell push 6 Amp modular type with all accessories complete all as directed. Make: Legrand Cat No. 6755 04 or equivalent in Philips / Crabtree / ABB / Havells

S&F bell AC 230 Volt Ding Dong type, single pole, multi music type complete all as directed.

S & F Ceiling rose surface bakelite White / Ivory / Urea finish 50 mm dia three terminals including supply and fix PVC square mounting block complete all as specified and directed.

S&F TV socket outlet, 1 Module. Make: Legrand Cat No. 6755 46 or equivalent in Philips / Crabtree / ABB / Havells

S&F RJ 11 Telephone socket, 1 module. Make: Legrand Cat No. 6755 41 or equivalent in Philips / Crabtree / ABB / Havells

S&F 20mm dia non metalic PVC conduit exclusive of boxes (Junction/ terminal) but inclusive all tees, bends, elbows, reducers and fixing accessories such as couplers lock, nut, saddles, pipe hooks etc. complete.

S&F metal flush boxes concealed for mounting concealed for TV/ Telephone socket etc including logic modular plates and surrounds of suitable size.. Make: Legrand Cat No. 6890 60 or equivalent in Philips / Crabtree / ABB / Havells

Taking down existing light fittings fixed in any description and S&F new 20/22/24 Watt wall mounted 4 ft glaze LED batten CCT(K) 6500 high quality design aluminium extruded with decortive and caps fixed as per manufacturers instructions and making necessary electrical connections and testing on completion complete all as directed. Make: Jaquar Cat No. LGLZ01X024XC 24 W CCT 6500 / Bajaj / Crompton / Philips / Wipro/ Havells.

Taking down existing light fittings fixed in any description and S&F new 10 Watt wall mounted 2 ft glaze LED batten CCT(K) 6500 high quality design aluminium extruded with decortive and caps fixed as per manufacturers instructions and making necessary electrical connections and testing on completion complete all as directed. Make: Jaquar Cat No. LGLZ01X010XC 10 W CCT 6500 / Bajaj / Crompton / Philips / Wipro

Taking down existing street light fittings of any type and S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium roadway luminaire with high power LED as light source of power 25W, IP 66, system luminous efficacy >85 Lm/ W, life 50,000 hrs, zero maintenance including all light fittings etc. and connection from ceiling rose to light fitting by using two core 1.5 sq mm copper conductor cable complete all as specified. Make: Jaquar LSRT01S025XC or an equivalent specifications in Osram / Schreder / Bajaj BCLST 25W

S&F 32 mm bore GI light grade pipe 1 m length with suitable bend bracket for street light fittings holded by saddles, etc. include all accessories to fix on corner of the building including two coats of synthetic enamel paint over a coat of red oxide primer complete.

S&F step type eletronic fan regulator modular type 120 W 2 module complete.Make Legarnd Cat No : 6730 29 or equuivalent as approved.

S&F 1200 mm sweep, 5 star rating ceiling fan with all accessories 230 V, SP with provision of 3 core cable from ceiling rose to fan complete in fan hook by using 10 mm dia MS bar shaped, fixed to slab reinforcement by cutting, chipping the slab concrete up to reinforcement level, same is filled, making good in CM 1:3 or PCC 1:2:4, including taking down old fan complete all as specified. Make: Orient Model No. New Bahar 1200mm WHITE CF or equivalent in Havells/Khaitan/ Usha/ Bajaj) Note: Old ceiling fan shall be deposited in the AGE E/M store yard.

S&F 300 mm sweep metal body exhaust fan AC single phase 230/240 V including taking down existing exaust fan and deposit same at AGE E/M Store complete. Make: Bajaj Model No. Bahar 300 mm Metalic Grey or equivalent in Khaitan / Usha / Havells

S&F in repairs epoxy powder coated sheet with metal door enclosures with 2 mm thick CRCA sheet for and including MCB DB TPN 4 way, 240 V with 200 Amp rated bus bar with double door locking system complete. Make: Legrand Cat No 6077 15 / Havells / L&T

S&F in repairs epoxy powder coated sheet with metal door enclosures with 2 mm thick CRCA sheet for and including MCB DB SPN 8 way, 240 V with 200 Amp rated bus bar with double door locking system complete. Make: Legrand Cat No. 6077 11 / Havells / L&T / ABB

S&F in repairs MCB SP 6 to 32 amp, 50 Hz, AC supply, 10 kA. Make: Legrand Cat No. 4085 87 to 4085 95 / Havells / L&T / ABB

S&F in repairs MCB SPN 10 to 32 Amp 240 V 50 Hz AC supply, 10 kA. Make: Legrand Cat No. 4086 14 to 4086 17 / Havells / L&T / ABB

S&F in repairs MCB TPN 63 Amp, 240 V, 50 Hz, AC supply. Make: Legrand Cat No. 4086 81 to 4086 83 / Havells / L&T / ABB

Taking down old existing sub main wiring and M&L for sub main wiring with 2 run single core 6 Sq.mm PVC insulated unsheathed copper multistranded conductor 1100 Volts grade drawing into and including PVC heavy duty casing and capping with PVC coated copper earth conductor 6 Sq.mm one run complete. Note: 2 run of 6 Sq.mm cable one run 6 Sq.mm earth wire with casing capping considered as one unit.

Taking up or down exingting cable and Supply and lay cable in trenches or fixing on wall or pole XLPE cable insulated screened PVC beded GI steel strip or wire armoured electric power cable (heavy duty) with standard aluminium conductor 1100 volt grade cross sectional area 25 Sqmm 4 core making necessary connection & testing on completion all as directed.

All as per item No. 165 here in above, but cross-sectional area 16 Sqmm, 2 core.

S&F 40 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2, fixed to wall, ceilings or in floors etc. complete as directed.

M&L for earthing complete with galvanized steel earth plate as electrode 600x600x6 mm buried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth not less than 1.5 m below ground level connected using galvanized iron earth lead wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of GI earth lead wire protected by Gl light grade pipe 15 mm bore, including provision of concrete pit of PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) with 40 mm thick cover of RCC 1:2:4 reinforced with 8 mm dia TMT bars reinforced at 100 mm C/C both ways and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 2 m long placed on top edge of earth plate, char coal and common salt filling test point made out of 40x8 mm flange with fixing arrangement, funnel, wire mesh and earth work in any type of soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 m all as per electrical Plate No. 3 of SSR Part I and connected to earth test point, including taking down existing earthing complete all as specified including testing on completion.

S&F 25 ltr storage capacity Electric water heater 5 star rating, glass liner inner tank, plastic outer body PUF insulation, operating on single phase, 230 V, AC supply testing on completion as per manufacturers instructions including taking down existing water heater fixed in any postion and depositing the same to AGE E/M store yard complete all as specified. Make: Bajaj Caldia or equivalent in Recold / Jaquar

Taking down an electric meter in poly carbonate body with LCD display in class single phase ISI marked of rating 10 to 60 Amps as per IS 13779 with optical port and box deposit same at AGE E/M Store complete all as directed.

Taking down and refixing an electric meter in poly carbonate body with LCD display in class single phase ISI marked of rating 10 to 60 Amps as per IS 13779 with optical port and box after repair work complete all as directed.

Taking down and refixing the same after repair work LED batten light fitting complete all as directed.

Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth for foundation of drain, man hole, laying of cables, stay etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in soft / loose soil.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and directed.

Removing excavated surplus soil to a distance exceeding 1 km but not exceeding 1.5 km and depositing where directed .at a level not exceeding 1.5 M above the starting point complete all as directed.

Jyoti Refrigeration

M/s. Vimal Enterprise

Amar Constructions

Vraj and Vaj Construction

S t modi

ruturajconstruction