E.T.No.-46/2025-26

Amount

Annexure-A (LABOUR CHARGES)

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual..

Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESPO schedule and local approved drawing.

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 11 KV line

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of Cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work

Erection of SP-23 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual

Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual

Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1 cement:4 graded stone20 mm niminal size: 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESPO cnstruction manual

Muffing of poles size 0.45x0.60 cm radius with 1:3:6 (1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement,stone and sand etc

Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store (PCC Single Pole).

Painting of SP-23 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.

Painting of SP-55 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.

Charges of Fixing of triangular type bracket on 11 KV line

Cartage of ST pole SP-23 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 51-70 Km)

Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 51-70 Km)

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 51-70 Km)

Headload cartage of ST Pole SP-23 from road to site (distance 0-1 Km)

Headload cartage of ST Pole SP-55 from road to site (distance 0-1 Km)

Head load cartage of small material (distance 0-1 Km)

Road Cutting with the help of JCB/Pokland and repairing of road after work as per specification of PWD.

Resagging of 11 KV Line as per direction of Engineer in charge.

Fixing of Suspension Clamp with I Hook.

Welding of rusted pole as per direction of Engineer in Charge.

Annexure-B (SUPPLY ITEMS) (As per UPCL Specifications)

Supply of Suspension Clamp with I Hook (Ins.) Clamp with N&B.

Supply of HT Stay Insulator.

Supply of IPC for 120 Sq.mm to 120 Sq.MM

Supply of Bolt & Nuts of size.

Supply of MS Clamp with N&B for Suspension clamp.

Supply of Bracing Clamp for ST Pole with N&B.

Supply of MS Half Clamp for STP SP-55.

M/S J K ELECTRICALS (BID ID -412966)

MANRAJ ELECTRICAL & INFRASTRUCTURE (BID ID -412981)