Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹43.1 L+₹1.5 L (3.63%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹43.5 L+₹1.9 L (4.67%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹43.8 L+₹2.2 L (5.27%)Rejected-Finance MES CHOWPATTI HASIMARA DIST JALPAIGURI WB PIN 735215 | HASIMARA | JALPAIGURI | WEST BENGAL | 735215 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹44.0 L+₹2.4 L (5.77%)Rejected-Finance 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
12 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
DAY TO DAY MAINTENANCE INCL CERTAIN OTHER MISC WORKS, JOINERY AT MD AND OTM ACCN AT HASIMARA MIL STN AND IMTRAT AREA UNDER GE (SOUTH) BINNAGURI
2023_MES_585637_1
8561/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOUCMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (SOUTH) BINNAGURI
₹84,000
Yes
24 Apr 2023
13 Mar 2023
15 Apr 2023
13 Mar 2023
12 Apr 2023
29 Mar 2023
Amount
Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description exc1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed.
Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description not exc 1.00 Sqm each complete all as specified and directed.
M&L Second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed
S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed
S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.
S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (Single /two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Fixing only 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (Single /two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L Second class hard wood 30 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.20 (a) complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L Second class hard wood 30 mm thick factory made glazed and skeleton windows, ventilators shutters, open rebated and prepared to receive glass , gauze etc, divided into square,with plain, chamfered or rounded,mitered and rebated sash bars,any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (b) complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.
S& F butt hinges medium weight, cold rolled mild steel 100mm all as specified and directed.
S&F mild steel barrel tower bolts stove enamelled black with bright bolt 75 mm long complete all as specified and directed.
S&F Mild steel handles cast type anodised of 75mm size complete all as specified and directed.
S&F mild steel handles cast type anodised of 150 mm size complete all as specified and directed.
S&F mild steel barrel tower bolts stove enamelled black with bright bolt 150 mm long complete all as specified and directed.
S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate of 200 mm length of bolt complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Powder coated anodised aluminium window sliding type three track aluminium sections weighing not less than 0.55 Kg per mtr (Two glazed shutter & one wire mess shutter) including necessary jointing cleats, glazing cleats, rubber packing anodised aluminium snap gridding, screws, handle, locking arrangement etc complete and 5.5 mm thick plain or tinted glass complete all as specified. (Make : Jindal/Hindalco/Indal).
S&F powder coated anodised aluminum frame of size 100 x 44 x 1.5 mm thick made of square tubler coated alumunium Section for doors with one or more rebates, jointing cleats for fixing etc and provision of alumunium door shutter (Single/Double shutter) incl. jointing cleats, glazing clips, rubber gasket aluminium anodised snap beading, srews hold fast, floor stopper, locking arrangement, handle of size not less than 200mm, 5.5mm thick tinted glass fixed in panels with miniumum 3 nos aluminium hinges 100mm long for one shutter etc complete all as specified. (Make : Jindal/Hindalco/Indal).
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Dismantling of AC corrugated / semi corrugated sheet as in roof coverings complete all as specified and directed.
S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed.
S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw complete all as specified and directed.
S&F fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with coach screws and washers in roof, wall etc complete all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section as in framed work in any position complete all as specified and directed..
M&L for second class hard wood (SAL) in scantlings clean swan in framed work as in rafter purlines etc complete all as specified and directed.
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 and painted one shop coat of zinc chromate primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and directed.
S&F MS steel Hollow section Square/rectangular as in roof truss ,purlin,rail etc etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 and painted one shop coat of zinc chromate primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and directed.
M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs/ blankets any thickness including cover fillets complete all as specified and directed.
M&L for non Asbestos ,fibre reinforced standard cement board as in celiling ,4mm thick designer board (610mm x 610mm ) & Anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed
All as per item No - 36 here in before but made out of 6mm thick gypsum ceiling board complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L Brick work using Fly Ash bricks with sub class 'B' bricks curved on plan with mean radius not exc 6m with bricks roughly cut to radius or bricks with wedge shaped joints built in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed
M&L for applying two coats of acrylic distemper on newly plastered wall surface including preparation of surface over a coat of 1mm thick Birla wall care putty complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and apply Two coat of white wash complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.
M & L 25 mm thick, PCC 1:2:4, type B-1, (using 20 mm graded stone aggregate) as in floors & finishing the surfaces fair and even with out using extra cement complete as specified and directed.
M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in vertical surface /skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed.
M&L 16-18 mm thick granite stone slab of approved size set and jointed with neat cement slurry over 15mm thick bedding layer in CM (1:6) .
M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 15 mm thick screed bed or bedding layer in CM 1:4 surface finished fair and even for laying floor finishescomplete all as specified and directed.
M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. complete all as specified and directed.
S& F in repairs 5mm thick printed colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed.
Demolition of cement concrete reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.
M&L for RCC (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in slab supported on wall,beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.
Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed
Mild Steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12mm wide with CP brass bracket guard railing 60cm long, complete all as specified.
S&F 12mm thick plywood with commercial finish as in pelmet,shelves,drawers, cupbord shutters, partions etc complete.
Supply and fix in repair double action floor spring hydraulically regulated made up of min. 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed with aluminium door.
S & F in repair door closer hydraulically regulated, designation No.3, aluminium (die cast) body, universal type, suitable for door shutters of any width complete all as directed.
Hacking out old broken glass of any thickness size,quality or description from metal frames and S&F 3mm thick sheet glass with glazing clips and oil putty complete as directed by EIC.
Hacking out old broken glass of any thickness size,quality or description from wooden frames and S&F 3mm thick sheet glass with glazing clips and oil putty complete as directed by EIC.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair Harrison rails (curtain), mild steel, chromium plated with fixing brackets stops, rollers etc complete all as specified and directed
S&F in repairs aluminium mortice lock with 4 leaver vertical type size 75mm
M/S BISHAL ENTERPRISES
M/S ROY ENTERPRISE
BHARAT ELECTRIC
M/S. KUMAR CONSTRUCTION CO.
M/S. NARENDRA KUMAR GARG
M/S BIJAY KUMAR SHIVA
M/S RATHIN ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .