REPAIR AND MAINT OF GEYSER, EXHAUST FANS AND ALLIED WORK AT LANSDOWNE AND KOTDWARA UNDER AGE (I) LANSDOWNE.

Taking down unsv aluminium/Copper point wiring (for power points) including all fittings such as switches, socket, flushed MS boxes and all fitting etc complete all as specified and as directed.

Material & Labour for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 2.5 sqmm multi stranded copper conductor cable (FRLSH) with contineous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed PVC conduit,medium grade(ISI marked) ,duly concealed on wall/ceiling or above false ceiling with fittings not less than 25 mm dia medium grade (Color coding of wires shall be Phase, neutral and earth wire all as specified ) sunk Metal flush box with and incl decorative polycarbonate frame for housing Modular Switches, sockets , fan regulators etc including white cover plate complete all as specified and directed.

S&F Modular Socket Outlet 6A/16A - 2/3 pin combined 2 module ISI marked complete all as specified and directed.

M & L Modular Switch, 16 A, 1 Way, 1 Module ISI Marked complete all as specified and directed.

Taking down the unserviceable water storage heater of 25/50ltrs capacity, any type and make, refixing the same after cleaning the scaling deposited in the inner container and water pipe complete all as specified and directed.

Supply and fix in repair of Non return valve 15mm dia made of bronze suitable for existing size of geysers ISI marked heavy duty complete all as specified and directed.

Supply and fix in replacement of Water heating element of 1.5 KW capacity for geysers in Triangular/ Cup type / Round type / As per existing shape and size complete all as specified and directed.

Supply and fix in repair Water heating element of 2 KW capacity for geysers in Triangular/ Cup type / Round type /As per existing shape and size complete all as specified and directed.

Supply and fix in repair thermostat for geysers in Triangular/ Cup type / Round type /As per existing shape and size complete all as specified and directed.

Supply and fix in repair indicator bulb (Red & Green) for geysers of approved make complete all as specified and directed. ISI Marked.

Supply and fix in replacement of spring loaded Air-release safety valve 15mm dia made of brass for geysers as per existing shape and size of approved make complete all as specified and directed.

Supply and fix in replacement of inner container made of stainless Steel/ Mild Steel for 25 ltrs capacity of approved make as per existing size / guage complete all as specified and directed.

Supply and fix in replacement of inner container made of stainless Steel/ Mild Steel for 50 ltrs capacity of approved make as per existing size / guage complete all as specified and directed.

Supply and fix in replacement of bottom cover in two pieces made of GI sheet for geysers duly painted in required/existing size and shape suitable for 25/50 ltrs capacity water storage heater complete all as specified and directed.

Supply and fix in replacement of fancy type Chromium plated/Brass stop cock CP with capston head, heavy duty of 15mm bore, fixed to iron pipe or brass ferrule complete all as specified and directed.

Supply and fix in replacement of brass assembly heavy duty suitable for 25 ltrs geysers of any make and as per sample size complete all as specified and directed.

Supply and fix in replacement of brass assembly heavy duty suitable for 50 ltrs Geyser of any make and as per sample size complete all as specified and directed.

Supply and fix in replacement of PVC connection heavy duty 450mm long suitable for 15mm bore pipe with 2 Nos of brass nut and washer for geysers complete all as specified and directed.

S&F in replacement of medium grade GI water tubing size of 15 mm dia conforming to IS-1239 Part-I-1979 including all fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc ,fixed to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling of exhaust fan 450/380 mm sweep of any make/ model, opening for cutting, taking out existing unserviceable winding wire, rewinding with super enamel copper wire of existing gauge, including varnishing and insulating material with washer, split pin, checknut, hanging clutch, condenser clamp, assembling,with required flexible wire .5 mtr and testing complete all as specified and directed.

All as per Srl item 20 above but for exhaust fan 350/300 mm sweep. complete all as specified and directed..

All as per Srl item No 20 above but for exhaust fan 250/200 mm sweep. complete all as specified and directed.

Taking down exhaust fans of any size, removing and cleaning of dust properly, oiling and greasing of bearing with and including replacement of washer, new split pin & any other minor spare parts such as new screw, checknut, pin etc and refixing in position, connecting, testing complete all as directed.

S&F in replacement of condenser 3.15 MFD exhaust fan complete all as specified and directed.

Spray painting of Exhaust fans of any size including fan blades, after scrapping and cleaning old painted surfaces, with enamel paint complete all as specified and directed.

S&F in replacement of plug top 3 pin, 15 Amp, 230 volts ISI Marked complete all as specified and as directed.

S&F in replacement of Metal Clad Plug Top 20 Amp, 230 volts suitable for MCB DB plug & socket SPN 20 Amps ISI Marked complete all as specified and directed.

S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter,AC single phase 230/240 Volt ,50HZ,RPM 1200,Copper winding of 250 mm sweep complete including making hole and making good the disturbed sufaces of wall all complete all as specified and directed. Note:- Old Exhaust fan deposit at MES Store Yard.

S&F Exhaust fan, Steel body complete with louvers shutter,AC single phase 230/240 Volt ,50HZ,RPM 1200,Copper winding of 300 mm sweep complete including making hole and making good the disturbed sufaces of wall all complete all as specified and directed. Note:- Old Exhaust fan deposit at MES Store Yard.

S&F in repair Wall Bracket light fitting (Bldg Security light) 20W housing made out of die cast aluminium alloy with tougned glass , IP 65 protection having clamp for mounting on building wall working on 240V AC 50 Hz , 20 Watts, lumen efficiency >120 lumen Per watt, including fixed on wall with 02 Nos MS Clamps made of 40x6 mm FI and bracket made of 40 mm dia light grade GI Pipe bend to shape, not less than 1.0 m long including connecting with 02 single core PVC insulated copper conductor cable 1100 v grade size 1.5 sqmm complete all as specified and directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 4 mm GI wire as earth lead by means of brass nuts and bolt, thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size PCC 1:2:4 Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia medium grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing wire to panel, including testing on completion complete all as specified and directed. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighing not less than 4kg/sqm in lieu of CI cover. (ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items.

Supply and installation of the electric water storage heater of ABS body type of 25 ltr capacity with rated power 2 KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass coating inside the tank alongwith heating element with anticorrosive magnesium anode, NRV, thermostat, indicator and temperature adjustable knob including steel braided flexible connection for pipe of size 15 mm dia bore with G.I. hexagonal adapters/ nuts on both side for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangement and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and directed. Note:- Old Geyser deposit at MES Store Yard.

Please Enable Macros to View BoQ information