Rajat jaynti Park Nirman karya

Amount

Civil Work Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Sand filling in plinth including supply of necessary quantity of Sand from a distance not exceeding 8km from the site of work & including Watering dressing etc. Rate to include cost of all materials, labour and T & P etc. required for proper completion of the work.

C.C. 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

RCC as above but for RCC beams & slab in 1:1½:3.

Mild steel or iron in plain work such as in reinforced concrete or reinforced brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured.

15 mm cement plaster on rough side of single or half brick wall of mix:. 1:6 (1 cement: 6 coarse sand)

12 mm. thick plaster with cement mortar consisting of 1part cement and 6 part of approved coarse sand. Minimum thickness not to be less than 10 mm. including supply of all materials, labour and T & P etc. required for proper completion of work.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

One priming coat of cement primer and one coat oil distemper on new work including supply of all materials, labour and tools and plants etc. required for proper completion of the work.

Shuttering and centering for Sup. Structure all required work including all cost of T & P etc. complete work as per building specification and direction of E/I.

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). (Steel wire fabric 0.9m wide rectangular mesh 75x25mm size weight not less than 7.75kg/sqm. )

Structural steel work

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size 7.5 cm deep with blinding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller.

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. Red sand stone

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)

Excavating, supplying and filling of local earth (including royality) by mechanical transport upto a ead of 5km also including ramming and watering of the earth in layers not exceeding 20

Entry Gate Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Sand filling in plinth including supply of necessary quantity of Sand from a distance not exceeding 8km from the site of work & including Watering dressing etc. Rate to include cost of all materials, labour and T & P etc. required for proper completion of the work.

C.C 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone ballast in the proportion 1:1.5:3 in raft foundation and footing, RCC beams & slab lintel of the doors and windows, excluding supply of reinfocement& its bending but including its fixing and binding the same with 24 B.W.G. G.I. binding wire & including necessary centring & shuttering etc. and also including s/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.

Mild steel or iron in plain work such as in reinforced concrete or reinforced brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured.

12 mm. thick plaster with cement mortar consisting of 1part cement and 6 part of approved coarse sand. Minimum thickness not to be less than 10 mm. including supply of all materials, labour and T & P etc. required for proper completion of work.

Shuttering and centering for Sup. Structure all required work including all cost of T & P etc. complete work as per building specification and direction of E/I.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

One priming coat of cement primer and one coat oil distemper on new work including supply of all materials, labour and tools and plants etc. required for proper completion of the work.

Signage Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Sand filling in plinth including supply of necessary quantity of Sand from a distance not exceeding 8km from the site of work & including Watering dressing etc. Rate to include cost of all materials, labour and T & P etc. required for proper completion of the work.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 grad size) upto plinth level with :ed stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Second class teak wood in frames of doors, windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia& length ( hold fast lugs or dash fastener shall be paid for separately).

Providing corrugated 1.00 mm thick with zinc coating not less than 275 gm/m² G.S. sheetroofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpewashers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete.

Painting of new iron and wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.80 ltr/10 sqm of approved brand and manufacture.

Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well developed with 8 or more flowers / flower buds in 20 cm Earthen pot / Plastic pot as per direction of the officer-in-charge

Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.

supplying of marrigold flower- 50 each tray

supplying of poppy flower -50 each tray

supplying of Salvia Hybrid different colour - 50 each tray

supplying of daisy flowers - 50 each tray

supplying of Dahlia double flowers - 50 each tray

Providing and stacking of Polyalthia longifolia (Ashok) of height 180-195 cm. in gunny bag of size 30 cm as per direction of the officer-in-charge.

ms.chanda khan contractor (BID ID -405914)

M/S AJUMUDIN CONTRACTOR (BID ID -405901)