Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.0 LAccepted-AOC 00 LALPUR KICHHA ROAD RUDRAPUR KICHHA RUDRAPUR UDHAM SINGH NAGAR UTTARAKHAND 263148 | UDAM SINGH NAGAR | UTTARAKHAND | 263148 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹13.1 L+₹5,606 (0.43%)Rejected-Finance | L2 | Rejected-Finance Higher Side | |
| 3 | L3₹13.5 L+₹45,264 (3.48%)Rejected-Finance AMAR NIWAS RA 288 GANDHI CHOWK SADAR BAZAR KARNAL | KARNAL | KARNAL | HARYANA | L3 | Rejected-Finance Higher Side | |
| 4 | L4₹13.5 L+₹47,952 (3.69%)Rejected-Finance 708 PREM NAGAR KARNAL HARYANA 132001 | KARNAL | KARNAL | HARYANA | 132001 | L4 | Rejected-Finance Higher Side | |
| 5 | L5₹13.7 L+₹70,616 (5.43%)Rejected-Finance | L5 | Rejected-Finance Higher Side |
Tender Value
₹15.8 L
EMD Value
₹31,620
Closing Date
14 Feb 2020, 5:00 pmClosed
Ritesh Nandal
Executive Engineer, Elect. Division PWD B and R Br., Ambala Cantt
Widening with hard shouldering and Strenghtening of Chhachhrauli Bilaspur to Panch Mukhi Hanuman Mandir (Road ID 717) (Km. 0.00 to 0.54) In Yamuna Nagar District. (Pdg. Street light)
2020_HRY_116652_1
PWD/Elect-KNL/Elect-AMB/16803
Open Tender
Construction Works
Works
60 days
Ambala Cantt.
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
Executive Engineer, Elect. Division PWD B and R Br
₹31,620
Yes
30 May 2020
30 Jan 2020
17 Feb 2020
30 Jan 2020
14 Feb 2020
30 Jan 2020
Amount
Main Switches S/E of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . Triple pole switch with neutral link 32 amp. 415 Volts. HSR No.31.12(a) (xiv) Cat-B
Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR No.31.17a) (ii)
TP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR No.31.17(a) (ii)
Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 65 mm dia on flushed. HSR No.31.21 (xiv)
(Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HSR No.31.22(i)
Extra for using salt and charcoal / coke for pipe earth electrode as required. HSR No.31.22(ii)
Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HSR No.31.22(xii)
Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . HSR No.31.22(xvi)
Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 10 Sq. mm 4 Core Cable . HSR No.31.26 (xxxix) Ard.
25 Sq. mm 4 Core Cable . HSR No.31.26 (xIi) Ard.
Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . HSR No.31.28 (ii)
25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HSR No.31.28 (iii)
Pedestal . Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . M.S.pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 750 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 900 mm x 600 mm x 250 mm below ground level. HSR No.(v) 31.33 (i)
Miscellaneous . Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 10 sqmm . HSR No.(X) 31.35 (ix) (c)
25 sqmm . HSR No.31.35 (ix) (e)
S/E of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm). HSR No.31. 40
Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction 4-way, TP & N (Vertical) (8+12) HSR No.31.41 (vi)
Supply and erection of MS sadles and clamps on wall / RCC parapit for fixing underground cable at at distance of 0.60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect. HSR No.31.48
S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job. HDPE Pipe 63/50 outer dia / inner dia. HSR No.31.67 (i)
Supply & errection of Hot Dip Galavnized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by manufacture including cost of foundation accessories etc. The foundation bolts as per manfacturer. 7 Mtr. Long pole with top dia 70mm and bottom dia 130mm with base plate of size 220x220x12mm. Make: Bajaj/Philips/ Surya. HSR No.31.68 (i)
Supply, installation, testing and Commissioning of 12.5 Mtr. Long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 part-3 suitable for 6 Nos Lumnaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufactured with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bollts , installation at site complete in all respect upto entire satisfaction of engineer-in-charge. Make: Bajaj/Philips/ Surya. Thickness of Top Section =3mm (minimum) Bottom Section =3mm (minimum) Bottom Section = 3mm (minimum) Thickness of Galvanization Top =65micronb (min) Bottom =85microm(min.) HSR No.31.83 i
Supply of LED Flood Light BARGEG 200W having energy efficiency 120 lumen per watt Make Bajaj/ Phillips/ Crompton/Surya / Wipro / Havells as per approved make with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. HSR No.NS-1
S/E of 0.3 KVA capacity inverter with SMF battery for aviation light in existing panel i/c the cost of labour charges and connections and petty material etc. for complete in all respect upto the entire satisfaction of the engingeer-in-charge of work. Make of Inverter:- Lumineous / Microtek/ Sukam. make of Battery:- Exide/ Amron. HSR No.NS-2
Foundation of 12 Mtr High Mast as per the Drawing of High Mast (L.S) HSR No.NS-3
S/E of 40 mm diameter 1.5 mtr Long GI bracket (B - Class) on each side with G.I coller 0.50 Mtr. long of suitable size to fit on octagonal pole with the top dis 70mm i/c necessary bolts & nuts etc required for fixing the bracket on top of the octagonal pole painted with Aluminium paint and including necessary connection with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. HSR No.NS-4
S/E of 70/72 watts LED street light with lense IP 66, HP having energy efficiency 120 lumen per watt dia cast aluminium hoising including erection of same on 8/7 mtr. Pole Make Bajaj/Philips / crompton / Surya / Wipro / Havells as per approved make with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer- in-charge of the work. HSR No.NS-5
Bakshi Brothers
Som Nath Contractor
Chopra Electric Company
SHREE SAI INTERNATIONAL
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .