Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.3 LAccepted-AOC IRRIGATION COLONY PENJISAHI PENISAHI KANDHAMAL | KANDHAMAL | ODISHA | 761108 | ₹47.3 L | L1 | Accepted-AOC Successful Bidder Selected From Transparent Lottery System |
| 2 | L1₹47.3 LRejected-AOC | ₹47.3 L | L1 | Rejected-AOC Unsuccessful Bidder |
| 3 | L2₹50.1 LRejected-AOC | ₹50.1 L | L2 | Rejected-AOC Unsuccessful Bidder |
| 4 | Rejected-Technical AT JAYASANKHAPUR PO TALADANDA PS KUNJANG DIST JAGATSINGHPUR | - | - | Rejected-Technical Due to non-submission of an agreement executed between the registered electrical contractor with their valid license,GSTN and PAN |
| 5 | Rejected-Technical | - | - | Rejected-Technical Due to non-submission of an affidavit towards non-abandonement of any work and non-rescinded any work during last five years |
Tender Value
₹55.6 L
EMD Value
₹55,700
Closing Date
10 Dec 2025, 5:00 pmClosed
OO the SE,RWD,PHULBANI
OO the SE,RWD,PHULBANI
Construction of Revenue Inspectors office Cum Residence at Khajuripada for the year 2025-26
2025_CERWI_122475_2
Online Tender/12/SERWD PHULBANI/2025-26
Open Tender
Civil Works - Buildings
180 days
OO the SE, RWD, PHULBANI
Construction of Revenue Inspectors office Cum Residence at Khajuripada for the year 2025-26
2 documents required · 2 mandatory
₹10,000
Yes
₹55,700
Yes
2 Jun 2026
3 Dec 2025
11 Dec 2025
3 Dec 2025
10 Dec 2025
3 Dec 2025
3 Dec 2025 - 9 Dec 2025
Earth work in excavation of foundation in hard soil within initial leads and lifts including dressing and levelling the bed and depositing the excavated earth places away from work site including all cost of labour, T&P Royalty, Cess etc. complete in all respect as directed by the Engineer-in-charge.
Filling foundation and plinth with fine coarse sand of approved quality with proper thick layer including watering, ramming with cost, conveyance, royalty, Cess and taxes of all materials and labour, T&P etc. complete as per specification and direction of the EIC
Cement concrete of proportion (1:3:6) in foundation and plinth using 4cm size clean hard black hand broken granite metal of approved quality from approved quarry including hoisting lowering & laying concrete in layers to the required level including cost conveyance and royalty of all materials with all taxes and compacting watering curing and all labour with T&P articles required for the work etc. complete as per specification and direction of the Engineer-in-Charge.
Providing and laying cement concrete (1:2:4) in foundation and plinth using 12mm size hard granite hand broken chips of approved quality from approved quarry including hoisting lowering and laying concrete in layers to the required thick including cost conveyance and Royalty Cess of al materials with all taxes and all labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.
Fly ash brick work in CM (1:6) after immersing brick for six hours in water before use in foundation and plinth having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.
Fly ash brick work in CM (1:6) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.
Fly ash brick work in CM (1:4) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.
R.C.C. work of M-25 grde with 20mm down graded black hard granite crusher broken chips aggregates as per drawing and technical specification etc. complete with watering curing etc. including cost conveyance and Royalty, Cess of all materials with all taxes and compacting watering curing and all labour with T and P articles required for the work etc. complete as per specification and direction of the EIC (Column Base)
Plinth Band
Column in Superstructure (Ground Floor)
Stair Case (Ground Floor)
Lintel (Ground Floor)
Chajja & Fins (Ground Floor)
Wall Beam & T Beams (Ground Floor)
Roof Slab (Ground Floor)
Providing supplying, fitting and fixing and placing in position H.Y.S.D bar reinforcement complete as per drawings and technical specifications clause 1000 and 1202 of MORD and direction of the E.I.C.
12mm (1/2”) thick cement plaster in Cement mortar (1:6) finished smooth to brick walls after racking out the joints of brick work with watering curing and cost conveyance, Royalty, Cess taxes of all materials all labour T&P etc. complete in all respect in all floors as per specification and direction of the Engineer-in-charge.
16mm thick cement plaster in CM(1:6) finished smooth to inside brick walls after racking out the joints including watering, curing etc. with cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
Providing fitting fixing Vitrified tiles in floors of size having thickness 6mm to 10mm and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
Providing fitting fixing Vitrified tiles in dados skirting and risers of steps 12mm thick bed cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
Providing fitting fixing of Chequred tiles in floors treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
Supplying fitting nd fixing of M.S. iron doors & windows choukath with shutter and flat & angel frames grill made out of M.S,.flat grill gate made out of iron plate shutter with angel choukath with cost of grill including cost conveyance of all material labour all type of taxes etc. complete as per specification and direction of the Engineer-in-Charge
Painting two coats over new wood/iron work with any approved paints over a coat of primer including all labour T&P artiels required for the work etc. complete in all respect as per the specification and direction of the Engineer-in-Charge
Providing distempering two coats to wall surface over a coat of cement primer with any approved distemper of approved shade including cost of distemper with conveyance taxes of all materials aznd labour T&P etc. complete as per the direction of the Engineer-in-Charge
Wall painting two coats with any approved quality of weather seal coat over a coat of priming on new work to an even shade including cost of distemper with conveyance taxes of all materials aznd labour T&P etc. complete as per the direction of the Engineer-in-Charge
Supplying fitting and fixing hand railing of Stainless steel of 304 grade using 50mm dia of 2mm thick circular pipe with Balustrde of size 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification buffing polishing etc. with cost conveyance taxes of all materials cost of all labour T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge
Back filling of surplus escavated earth at work site by initial lead and lift of 1.50mtr including cost of all labour T&P required for the work etc. complete as directed by the Engineer-in-charge
Earth filling in foundation and plinth with proper thick layer including waterring ramming with cost conveyance royalty Cess and taxes of all materials and labour T&P etc. complete as per the specification and direction of the Engineer-in-Charge
Estimated Rate in Rs. P
Fly ash brick work in CM (1:4) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C
R.C.C. work of M-25 grde with 20mm down graded black hard granite crusher broken chips aggregates as per drawing and technical specification etc. complete with watering curing etc. including cost conveyance and Royalty, Cess of all materials with all taxes and compacting watering curing and all labour with T and P articles required for the work etc. complete as per specification and direction of the EIC (Column in superstructure) First Floor
Stair Case (First Floor)
Lintel (First Floor)
Chjja & Fins (First Floor)
Wall Beam & T Beams (First Floor)
Roof Slab (First Floor)
Providing supplying, fitting and fixing and placing in position H.Y.S.D bar reinforcement complete as per drawings and technical specifications clause 1000 and 1202 of MORD and direction of the E.I.C.
20mm thick grading plaster (1:4) on roof slab with cost conveyance royalty Cess taxes of all materials with all labour & T&P etc. complete in all respect in all floors as per the specification and direction of the Engineer-in-Charge
12mm (1/2”) thick cement plaster in Cement mortar (1:6) finished smooth to brick walls after racking out the joints of brick work with watering curing and cost conveyance, Royalty, Cess taxes of all materials all labour T&P etc. complete in all respect in all floors as per specification and direction of the Engineer-in-charge.
16mm thick cement plaster in CM(1:6) finished smooth to inside brick walls after racking out the joints including watering, curing etc. with cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
Providing fitting fixing Vitrified tiles in floors of size 600 x 600mm having thickness 6mm to 10mm and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
Providing fitting fixing Vitrified tiles in dados skirting and risers of steps 12mm thick bed cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
Supplying fitting nd fixing of M.S. iron doors & windows choukath with shutter and flat & angel frames grill made out of M.S,.flat grill gate made out of iron plate shutter with angel choukath with cost of grill including cost conveyance of all material labour all type of taxes etc. complete as per specification and direction of the Engineer-in-Charge
Painting two coats over new wood/iron work with any approved paints over a coat of primer including all labour T&P artiels required for the work etc. complete in all respect as per the specification and direction of the Engineer-in-Charge
Providing distempering two coats to wall surface over a coat of cement primer with any approved distemper of approved shade including cost of distemper with conveyance taxes of all materials aznd labour T&P etc. complete as per the direction of the Engineer-in-Charge
Wall painting two coats with any approved quality of weather seal coat over a coat of priming on new work to an even shade including cost of distemper with conveyance taxes of all materials aznd labour T&P etc. complete as per the direction of the Engineer-in-Charge
Supplying fitting and fixing hand railing of Stainless steel of 304 grade using 50mm dia of 2mm thick circular pipe with Balustrde of size 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification buffing polishing etc. with cost conveyance taxes of all materials cost of all labour T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge
BASIC RATE In Figures To be entered by the Bidder Rs. P
R.C.C. work of M-25 grde with 20mm down graded black hard granite crusher broken chips aggregates as per drawing and technical specification etc. complete with watering curing etc. including cost conveyance and Royalty, Cess of all materials with all taxes and compacting watering curing and all labour with T and P articles required for the work etc. complete as per specification and direction of the EIC (Column in superstructure) Second Floor
Wall Beam & T Beams (Second Floor)
Roof Slab (Second Floor)
Providing supplying, fitting and fixing and placing in position H.Y.S.D bar reinforcement complete as per drawings and technical specifications clause 1000 and 1202 of MORD and direction of the E.I.C.
20mm thick grading plaster (1:4) on roof slab with cost conveyance royalty Cess taxes of all materials with all labour & T&P etc. complete in all respect in all floors as per the specification and direction of the Engineer-in-Charge
12mm (1/2”) thick cement plaster in Cement mortar (1:6) finished smooth to brick walls after racking out the joints of brick work with watering curing and cost conveyance, Royalty, Cess taxes of all materials all labour T&P etc. complete in all respect in all floors as per specification and direction of the Engineer-in-charge.
16mm thick cement plaster in CM(1:6) finished smooth to inside brick walls after racking out the joints including watering, curing etc. with cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
Supplying fitting nd fixing of M.S. iron doors & windows choukath with shutter and flat & angel frames grill made out of M.S,.flat grill gate made out of iron plate shutter with angel choukath with cost of grill including cost conveyance of all material labour all type of taxes etc. complete as per specification and direction of the Engineer-in-Charge
Painting two coats over new wood/iron work with any approved paints over a coat of primer including all labour T&P artiels required for the work etc. complete in all respect as per the specification and direction of the Engineer-in-Charge
Providing distempering two coats to wall surface over a coat of cement primer with any approved distemper of approved shade including cost of distemper with conveyance taxes of all materials aznd labour T&P etc. complete as per the direction of the Engineer-in-Charge
Wall painting two coats with any approved quality of weather seal coat over a coat of priming on new work to an even shade including cost of distemper with conveyance taxes of all materials aznd labour T&P etc. complete as per the direction of the Engineer-in-Charge
Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
Filling foundation and plinth with fine coarse sand of approved quality with proper thick layer including watering, ramming with cost, conveyance, royalty, Cess and taxes of all materials and labour, T&P etc. complete as per specification and direction of the EIC
Cement concrete of proportion (1:3:6) in foundation and plinth using 4cm size clean hard black hand broken granite metal of approved quality from approved quarry including hoisting lowering & laying concrete in layers to the required level including cost conveyance and royalty of all materials with all taxes and compacting watering curing and all labour with T&P articles required for the work etc. complete as per specification and direction of the Engineer-in-Charge.
Fly ash brick work in CM (1:6) after immersing brick for six hours in water before use in foundation and plinth having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.
2.5cm thick damp proof course with C.C. (1:2:4) using 12mm size hard granite hand broken chips of approved quality from approved quarry including hoisting lowering and laying concrete in layers to the required thick including cost conveyance and Royalty Cess of al materials with all taxes and all labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.
Fly ash brick work in CM (1:6) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.
R.C.C. work of M-25 grde with 20mm down graded black hard granite crusher broken chips aggregates as per drawing and technical specification etc. complete with watering curing etc. including cost conveyance and Royalty, Cess of all materials with all taxes and compacting watering curing and all labour with T and P articles required for the work etc. complete as per specification and direction of the EIC (Column base)
Plinth Band
Column in Sueprstructure (Ground Floor)
Providing supplying, fitting and fixing and placing in position H.Y.S.D bar reinforcement complete as per drawings and technical specifications clause 1000 and 1202 of MORD and direction of the E.I.C.
12mm (1/2”) thick cement plaster in Cement mortar (1:6) finished smooth to brick walls after racking out the joints of brick work with watering curing and cost conveyance, Royalty, Cess taxes of all materials all labour T&P etc. complete in all respect in all floors as per specification and direction of the Engineer-in-charge.
16mm thick cement plaster in CM(1:6) finished smooth to inside brick walls after racking out the joints including watering, curing etc. with cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.
Supplying fitting nd fixing of M.S. iron doors & windows choukath with shutter and flat & angel frames grill made out of M.S,.flat grill gate made out of iron plate shutter with angel choukath with cost of grill including cost conveyance of all material labour all type of taxes etc. complete as per specification and direction of the Engineer-in-Charge
Painting two coats over new wood/iron work with any approved paints over a coat of primer including all labour T&P artiels required for the work etc. complete in all respect as per the specification and direction of the Engineer-in-Charge
Wall painting two coats with any approved quality of weather seal coat over a coat of priming on new work to an even shade including cost of distemper with conveyance taxes of all materials aznd labour T&P etc. complete as per the direction of the Engineer-in-Charge
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C .(2 x (3.00 + 2.00 ) m x 0.125 m =1.25 sqm+2.54 x 1.54 m = 3.911 sqm)
E.I.Works Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.)Group A 1.2.1-1.24.2
Providing & laying Cement Concrete (1:2:4) in foundation and plinth using 12mm size hard granite hand broken chips of approved quality from approved quarry including hoisting lowering and laying concrete in layers to the required thick including cost conveyance and Royalty Cess of al materials with all taxes and all labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.
Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.)Group B 1.2.2 - 1.24.2
Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.) Group C 1.2.3 - 1.24.2
Recessed wiring to Fan point in Group B 1.2.2 - 1.24.2
Recessed wiring to Fan point in Group C 1.2.3 - 1.24.2
Recessed wiring to Callbell point in Group C 1.2.3 - 1.24.2
TOTAL AMOUNT Without Taxes in Rs. P
S/F of 5/6 Modular Switch & 3pin 5/6A Modular Socket on existing board (1.25.1+1.25.4)
S/F of 15/16A FT power plug and Socket Modular type Accessories(1.27)
FIRST FLOOR Fly ash brick work in CM (1:6) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C
SECOND FLOOR Fly ash brick work in CM (1:6) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C
S/F to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required.for 2 Module(1.24.1)
S/F to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with
suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required.for6 Module
S/F to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required.for8 Module
S/F to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required.for12 Module
Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8)
Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard) 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2)
Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard) 2x4 sqmm + 1 x 1.5 sqmm (1.8.3)
Inverter wiring (1x1.5smm) Copper wire (1.19.1)
Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard) 2x6 sqmm + 1 x 2.5 sqmm (1.8.3)
S/F of 5 to 32 Amp rating 240 Volt "B" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1)
S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b)
Supply and fixing of following size MCB box with sheet steel enclosure, distribution board, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland /plate, interconnection, phosphate and powder painted including earthing etc. as required ( But without MCB/ RCCB/ ISOLATOR) . 8 way Double door (2.3.6)
S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )
S/F of batten holder BK angle holder ISI marked including connection etc. instead of ceiling rose(1.29- 1.28)
Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)
S/F of 9W LED Bulb
Supply andlaying 8 SWG copper wire in recess for loop earthing as required (3.18)
Supply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- Highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS )
S/F step type modular fan regulator
S/F of 18-25 watt LED Tube light fitting including necessary connection, Make-( Crompton/HPL/Polycab/Havells/PAC)
Supply, Installation, Testing and commissioning of bulkhead fittings including fixing of 5 watt LED Lamp(Make:Havels with die cast aluminium housing and frosted glass cover).RUGBY
S/F of Extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.
S/F of Fan hook S, Type on ceiling.(M-22)
S/F Call bell/Buzzer ISI marked suitable for DC/AC single Phase 230 volts complete as required.(1.30)
Supply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells )
2000VA/24V Invertor machine,Make-Heavy duty V-Turbo UPS-23509 (microtek)/PRIME 2250(V-GUARD)/EVO S 2300(LUMINOUS) and 2 nos. 180Ah tall tubular BatteryMake-Luminous /microtek/v-guard and 16A Delux plug Top with Luminous single Trolley for Invertor Battery.
From 1.5 mtr to 3.0 mtr depth,3.54 m x 2.54 m x 0.70 m =6.294 cum
Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.3.54 m x 2.54 m x 0.15 m =1.348 cum
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.3.54 m x 2.54 m x 0.15 m =1.348 cum
S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 32A DP Modular Switch with neon Indicator & 5 pin 15/16 amp. piano type Modular Socket & Mini DP MCB, connection, painting etc as required for AC
Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(3.54 m x 2.54 m x 0.10 m =0.899 cum +2.54 m x 1.54 m x 0.038 m= 0.148 Cum)
I box with Front cover(1.24.9 + 1.25.1+ 1.25.4 +2.6.1)
In Foundation and Plinth in C:M (1:6)1 x 0.40 m x 0.40 m x 0.60 m = 0.096 cum
S/F of computer board consisting of 3 nos. of 5 amp Modular plug and switch complete with wiring on 12M GI box with Front.cover(1.24.9 +1.25.4 + 2.5.1)
Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(2 x ( 2.54 + 1.54 ) m x 2.00 m =16.32sqm+2.54 x 1.54 m = 3.911)
Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.3.00 m x 2.00 m x 0.125 m=0.75 cum
Supplying all materials, labour, T&P and making M.S. Step Iron in 8mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.
Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.1.75 m x 0.45 m
Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(2 x ( 3.24 + 2.24 ) m x 1.00 m = 10.96Sqm+2 x ( 3.00 + 2.00 ) m x 1.00 m = 10.00 Sqm+2 x ( 3.24 + 2.00 ) m x 0.12 m = 1.257 Sqm)
Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge. 4 x 2.05 x 0.72m=5.90
Supplying all materials, labo
Supplying all materials, labour, T&P and fixing Stainless Steel kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages fixing PVC waste pipe of 32mm nominal diameter including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. stainless steel kitchen sink(450x 400x200mm)
ur,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.
Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EICFirst Floor
Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. First Floor Wall
Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C.580mm size Orissa pan(Hindware,Parryware)
Supplying all materials, labour, T&P and fixing wash down water closet(E.W.C) with integral 'S' or 'P' trap(Hindware,Parryware,Cera) to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in C.M(1:1) etc all complete as per specification and direction of the E.I.C.
Supplying all materials, labour, T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.
Supplying all materials, labour, T&P and fixing bowl pattern urinal(Hindware,Parryware,Cera) including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C. Flat Back lipped wall urinal
Supplying all materials,labour, T&P and providing marble slab in urinal partition wall including cutting grooves in wall and making good the damages including watering curing etc as per specification and direction of the E.I.C 2 x 0.60m x 0.90m = 1.08 sqm
Supplying all materials, labour, T&P and fixing glazed earth ware squatting plate size (600 x 350x100 mm ) ( Hindware/ Parrayware)with integral flushing pipe including embedding the plate in 25 mmC.M (1:8) laid over 150 mm C.C (1:4:8) using 40mm h.g metal etc all complete as per specification and direction of the E.I.C.Squatting urinal
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. 110mm diameter U-PVC SWR pipes
110mm U-PVC SWR P-trap
110mm U-PVC SWR single junction door
110mm U-PVC SWR door bend
110mm U-PVC SWR Offset
110mm U-PVC SWR plain bend
75mm U-PVC SWR door bend
110mm U-PVC SWR vent cowl
75 mm diameter U-PVC SWR pipes
75 mm U-PVC SWR plain bend
125 mm dia C.P Grating
supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.375 mm thick wall
250 mm thick wall
Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. 160 mm dia PVC Pipe all round
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.
Supplying all materials, labour, T&P and providing, laying soakway gallary with SW/PVC pipes, jointing lead loose packed allround with stone boulders 50mm to 150mm other than granite, covered at top with a layer of flat tiles 300mmx300mmx25mm including earthwork in excavation of trenches in all kinds of soil to an average depth of 1.5 mtr, covering of earth at the gallary top etc. all complete as per approved drawing and direction of the E.I.C. 160 mm dia PVC gallary
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. 0.90 m dia x 2.00 m deep Soakway pit
supplying all materials, labour, T&P and cutting grooves in pucca Floors, and walls for taking G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:3:6) including finishing with 12mm C.P (1:3) complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.
Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 lits capacity on the roof of F. floor
Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 21000 lits capacity on the roof of F.floor
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor G.I. pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.15mm dia C-PVC pipes
20mm dia C-PVC pipes
25mm dia C-PVC pipes
Supplying all materials, labour T&P and fitting and fixing of C.P Shower(Jaquar make) with 15mm or 20mm inlet with C.P Shower arm including polishing etc all complete as per specification and direction of the E.I.C15 mm x 150mm dia C.P Shower with arm
15 mm dia C.P Health Faucet ( Jaquar Make )
Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings(Jaquar Make) of the following nominal bore with supply of all jointing materials etc. all complete as per specification
and the direction of the E.I.C.15mm dia CP Long body Bib Cock
15mm dia CP Short body Bib Cock
15mm dia CP Two way angle/Bib Cock
15 mm dia CP Angle cock
15mm dia CP Concealed Stop Cock
15mm dia CP Pillar Cock
15mm dia CP nipple
15mm dia CP Flange
25mm dia Metal Full Way Valve
Supplying all materials, labour T&P and fixing wash basins(Hindware,Parryware,Cera) with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C.550mmx400mm W.H.basin
Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C. Porcelain Pedestal
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.Mirror with plastic moulded frame
Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C20mmx450mm long CP towel rail
CP towel ring
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.CCP soap holder
COMPOUND WALL Earth work in excavation of foundation in hard soil within initial leads and lifts including dressing and levelling the bed and depositing the excavated earth places away from work site including all cost of labour, T&P Royalty, Cess etc. complete in all respect as directed by the Engineer-in-charge.
Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern(Hindware,Parryware,Cera) with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C 10 lit PVC L/L Cistern
Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor
Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. Ground Floor Wall
Supplying all materials, labour ,T&P and laying in trenches HDPE of the following nominal bore and pipe fittings including testing etc all complete as per direction of the E.I.C. 32mm dia HDPE pipes
Supplying and fitting & fixing of I.S.I make 1.00 H.P single phase Submersible Pump set to give discharge of 3000 ltr/hour at a head of 40 mtr etc all complete as direction of EIC.
Supplying all labour,T&P and fitting & fixing of I.S.I make 1.00 H.P single phase Submersible Pump set with commissioning and testing etc all complete as direction of EIC.
Supplying and fitting & fixing of D.O.L starter for1.0H.P single phase Submersible Pump etc all complete as per direction of Engineer-in-charge.
S/F of Invertor board consisting of 2 nos. of 15 amp Modular plug and switch and 10 amp SP MCB complete with wiring on 8M G
Supplying and fitting & fixing of suitable cable and connecting the pump and starter etc all complete as per direction of Engineer-in-charge.
Supplying and fitting & fixing of Plastic rope, M.S well cover, M.S clamp, etc all complete as per direction of Engineer-in-charge.
Supplying and fitting & fixing of HDPE pipes and pipe fittings with C.P Nippling and lowering to bore well, making connection to pumpset & testing etc all complete as per specification and the direction of the E.I.C.32 mm dia HDPE Pipe
Drilling of 150mm dia bore :-30.01 mtr to 80.00 mtr
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.75 MB
BOQ_569074.xls
BOQ • 0.50 MB
Download all tender documents and submit your bid