REPAIR/MAINTENANCE OF EXTERNAL ELECTRIC SUPPLY, OVERHEAD LINES, UG CABLE AND ALLIED WORKS AT ZONE 1 (HQ 4 CORPS, SIGNAL CENTRE, STN HQ) UNDER GE (S) TEZPUR

Amount

Labour to re-stringing/ tilting, clamping, bending , jumpering, etc to be removing excess sag of loose ACSR of over head line upto permissible sag at camp area using accessories, T&P such as manila rope, puller and tripod etc upto permissible sag between two poles to continiously upto terminating point of tightening of stay strand in proper angle etc all as per site requirement and directed Note :- (i) Three/ four/six/eight runs of ACSR shall be measured against one unit. (ii) Quoted rates shall be included all required T&P and safety equipment. (iii) Span Between two consecutive poles shall be measured as one unit.

Trimming /cutting to small tree branches girth not exc 30 cm minimum 2.0 Mtr clearance complete with required cutting tools ladders and safty equipments is deemed to be included this unit prise all as spacified and as directed.

M&L and fixing inreplacement of Composite polymer air breaker switch gange operated triple pole ,mechanically oprerated mounted on 12 Nos insulatior and steel frame ,with operating mechanism worked from ground level for current rating upto 200 Amps, 11 KV voltage working pressure conforming to IS-1818/72 and 9921/85 complete manufacuter in origional with operating handel ,fixing arrangement , operating rod, etc all as site requirement ,specified and directed by Engr-in-Charge. Make :- Jaipuriya Brothers/Pactil/BHEL

M&L and fixing inreplacement of Composite polymer air breaker switch gange operated triple pole ,mechanically oprerated mounted on 12 Nos insulatior and steel frame ,with operating mechanism worked from ground level for current rating upto 400 Amps, 11 KV voltage working pressure conforming to IS-1818/72 and 9921/85 complete manufacuter in origional with operating handel ,fixing arrangement , operating rod, etc all as site requirement ,specified and directed by Engr-in-Charge. Make :- Jaipuriya Brothers/Pactil/BHEL

M&L and fixing inreplacement of Composite polymer lighting arestor expulsion type complete with all fittings transmission class discharge capacity of 65 KA suitable for 11000 volts all as specified and directed . (Make:Jaipuriya Brothers/Obum/BHEL/Elpro)

Supply and fixing in replacement Danger notice plate of 1.6 mm thick mild stell sheet, vitreous enamelled white, with letters , figures and conventional skull and bones in signal red colour and fixed with MS clamps , bolts and nuts of approved size for HT 25x20 cm size all as specified and directed. Note :- Instruction shall be written in three lauguage Hindi, English and Assami on notice board.

Supply and fixing in replacement Danger notice plate of 1.6 mm thick mild stell sheet, vitreous enamelled white, with letters , figures and conventional skull and bones in signal red colour and fixed with MS clamps , bolts and nuts of approved size for LT 20x15 cm size all as specified and directed. Note :- Instruction shall be written in three lauguage Hindi, English and Assami on notice board.

M&L Composite polymer Expulsion type Drop out fuse single pole 11 KV above 50 Amps up to 100 Amps including MS channel for fixing it with the pole including taking down old unsv DO fuse complete all as spacified and directed.

M&L and fixing in replacement to anti climbing devices comprising 2.24 mm dia galvanised steel 2- stand barbed wire with 2.0 mm dai barbs wrapped spirally round pole or for suitable to rectagular PCC pole fabricated out of MS bars (round, square and flat) including nuts bolts and washers and welding in two havels made to shape to suit the cross section of the pole fixing with pole all as speccified and directed by Engr-in-charge.

M&L and fixing in replacement to cross arms, bracing, supports, clamps and back plate fabricated from structural steel section including nut, bolts, washers, welding, bending, cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and as directed .

Supply and fix syntheic mat of size 2mX 1m X 19mm including taking out old unserviceable Syntheic mat all as spacified and directed bu Eniginner-in-charge

M&L and fixing inreplacement of Composite polymer Pin type porcelain, vitreous white brown or green insulators including one galvanised mild steel spindle, two galvanised iron washers, and one galvanised iron nut, 100 mm height, 65 mm dia for working pressure 1100 volts grade complete all as specified and directed .

M&L and fixing inreplacement of Composite polymer Pin type porcelain, vitreous white brown or green insulators including one galvanised mild steel spindle, two galvanised iron washers, and one galvanised iron nut, 150 mm height, 150 mm dia for working pressure 11000 volts grade complete all as specified and directed .

M&L and fixing inreplacement of Composite polymer Shackle type, porcelain, vitreous, white brown or green insulators, including galvanised mild steel straps 31x5 mm, washers, insulator, bolts in dai 14 mm , washer and nut, 100 mm height, 115 mm dia, including galvanised mild steel straps, washers, insulator bolts etc suitable for working pressure 1100 volts grade complete all as specified and directed.

M&L and fixing inreplacement of Composite polymer Shackle type, porcelain, vitreous, white brown or green insulators, including galvanised mild steel straps 38x5 mm, washers, insulator, bolts in dai 20 mm , washer and nut, 150 mm height, 150 mm dia, including galvanised mild steel straps, washers, insulator bolts etc suitable for working pressure 1100 volts grade complete all as specified and directed.

M&L and fixing inreplacement of Composite polymer single Disc type, porcelain, vitreous, white brown or green insulators, including galvanised mild steel straps washers, insulator, bolts , washer and nut, 145 mm height, 255 mm dia ball and socket type white brown or green, including galvanised mild steel straps, washers, insulator bolts etc suitable for working pressure 1100 volts grade complete all as specified and directed.

M&L and fixing inreplacement of Composite polymer loop type, porcelain, vitreous, white brown or green insulators, small size with overall dimensions 65x 90 mm clearance of hole 16 mm etc complete all as specified and directed.

M&L and fixing inreplacement of Composite polymer Disc type insulator ball and socket type with tension clamps and all hardwear components for conductors, working pressure fit for 11000 volts complete all as specified and directed.

M&L and fixing inreplacement of stay assembly complete with accessories as shown in electrical plate No. - 1, with and including stay road rod 20 mm dia and galvanised stay of size 7/2.4 mm in required length, stay clamp etc complete all as specified and directed . Note : Loop type insulator, excavation, earth work and concrete to be measured and paid against the respective item.

S&F inreplacement of composite polymer type post insulator for 11 kv overhead line including all its accessories complete all as spacified.

M&L and fixing inreplacement of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long)

M&L and fixing inreplacement of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-55 (11 metres long)

M&L and fixing inreplacement of galvanised stay stand in size 7/2.24 complete all as specified and directed.

M&L and fixing inreplacement of for galvanised steel wire in size 4 mm dia to be fixing as HT line safe guard incl titing/ bending /cradles, hexagonal/ rectangular, fabricated net in proper gap etc all as site required all as directed.

M&L and fixing inreplacement of for re-fixing/ titing/ bending /cradles, hexagonal/ rectangular, fabricated net in proper gap etc all as site to old galvanised wire in any size as safe guard of LT over head line with fixing as directed.

Re-fixing only with tilting/ jointing/ bending/ jumpering etc all as site to aluminium conductor steel rainforced (ACSR) in any size/ dai/ type etc on existing poles using puller/ rope/ tripod etc to re-staching in permiceable sag all as directed.

M&L and fixing inreplacement of stringing aluminium conductor steel rainforced (ACSR) in any type /size/ dai etc on existing poles including winding, jumpering with alkathine pipe etc complete all as specified and directed .

M&L and fixing inreplacement of house service bracket (Hook type) complete with 3.0 mtr long GI pipe 50 mm dia med grade, two nos 90* end, MS hook and stay guy complete all as site and directed..

M&L and fixing inreplacement of end/ straight termination jointing kit ,1100 volt grade (earthed) , 3.5 core aluminium conductor XLPE insulated armoured heavy duty cable heat shinkable suitable in/ out door type to be fix on incoming /outgoing connection of LT panel with gland etc at varrious location for following size :-. Make - Dension / Raychem / 3M (a) 3.5 core 400 sqmm

(b) 3.5 core 185 to 300 Sqmm

(e) 3.5 core 90 to 150 sqmm

(f) 3.5/4 core 25 to 70 Sqmm

(g) 3.5/4 core upto 16 sqmm

M&L and fixing inreplacement of end termination jointing kit ,11000 volt grade (earthed) ,suitable to 3 core 95 sqmm aluminium conductor XLPE armoured heavy duty cable.,heat shinkable suitable outdoor type with jointing material and accessories .Make - Dension / Raychem / 3M

M&L and fixing inreplacement of end termination jointing kit ,11000 volt grade (earthed) ,suitable to 3 core 120 sqmm to 185 sqmm aluminium conductor XLPE armoured heavy duty cable.,heat shinkable suitable out door type with jointing material and accessories Make - Dension / Raychem / 3M

Supply and fixing/laying/ inreplacement of drawn through in pipe service connectons 1100 volts grade heavy duty PVC insulated sheathed tape in service connection suspended by insulating hanger not more than 1 mtrs a part of including 4 mm suspension wire heavy duty muilti core aluminium stranded muilticore conductor served with an inner sheathing of PVC insulated aluminium conductor overall nominal cross section 10 sqmm 2 core complete all as directed.

Supply and fixing/laying/ inreplacement of drawn through in pipe service connectons 1100 volts grade heavy duty PVC insulated sheathed tape in service connection suspended by insulating hanger not more than 1 mtrs a part of including 4 mm suspension wire heavy duty muilti core aluminium stranded muilticore conductor served with an inner sheathing of PVC insulated aluminium conductoroverall nominal cross section 16 sqmm 2 core complete all as directed.

Supply, Installation, testing and commisioning inreplacement of LT Switch gear panel outdoor type front and back openable type totally enclosed dust and vermin proof, free standing, factory fabricated, fully compartmentalized in design suitable for 415 volts, 3 phase, 50 Hz, 4 wire AC system conforming to IS : 375 all as specified herein after. Degree of protection shall not be less than 1P-51 as per IS : 2147 and it shall be suitable to withstand a Fault level of 50 KA (rms) for one second. Busbars shall be of copper not less than 600 Amps rated capacity . Cross section of Busbars for each phase and neutral shall be same. All the Busbars shall be air insulated and will be codified in Red, Yellow, Blue and Black colours as per the standard practices using heat shrinkable sleeves. Copper busbars shall be made of high conductivity 99.9% pure copper of ETP grade. All the busbars shall have full round edges and shall be suitably braced with non-hygroscopic SMC supports of 660 volts grade. Copper Bus bar should be provided for all outgoing MCCBs. LT Switch gear shall be made up of requisite vertical section, which when coupled together shall form continuous dead front switchboard. It shall be readily extensible on both sides by addition of vertical sections after removal of end covers. It shall be constructed only of materials capable of with standing the mechanical, electrical and thermal stresses as well as the effect of humidity, which are likely to be encountered in the normal service of the panel. A front framed structure of rolled folded steel channel section of minimum 3 mm thickness rigidly bolted/welded together. The structure shall comprise of the components contributing to the major weight of the equipments such main busbars, vertical risers and other front mounted accessories. The structure shall be mounted on rigid Base Frame of MS channel of minimum thickness 5mm and height 75 mm. The height of the panel shall be 1.5 mtrs on base frame and Width of the panel 1.10 mtrs and total height of LT Panel not more than 2 mtrs from floor level. The depth of panel shall be adequate to cater,for proper cabling space and shall not be less than 1000 mm. Panel Doors and covers shall be of minimum 2mm thick sheet steel. Minimum clearance of 32 mm and 26 mm respectively shall be maintained between phases/phase to neutral/phase to earth and between neutral to earth. All sheet metal work incl. frames etc shall be with anti corrosive coating and finally epoxy polyester powder coating of flint grey shade (RAL-7032) all as specified in relevant ISS.

M&L and fixing inreplacement of MCCB ,4 pole, TPN, 415 volts ,microprocessor based , rated 400 Amps,having repturing capacity 36 KA - 01 No as incomer Make - Schneider cat No. LV 432677 in equivelent Legrand / Seimens Note :- All MCCBs of sch shall be conforming Ics= 100% Icu as per IEC 60947 -2 and front LED indication (ready, overload pre-alarm & over load).

M&L and fixing inreplacement of MCCB ,4 pole, TPN, 415 volts ,microprocessor based , rated 250 Amps,having repturing capacity 36 KA - 01 No as incomer Make - Schneider cat No. LV 431780 in equivelent Legrand / Seimens

M&L and fixing inreplacement of MCCB ,4 pole, TPN, 415 volts ,microprocessor based , rated 160 Amps,having repturing capacity 25 KA - 01 No as incomer Make - Schneider cat No. LV 430750 in equvelent in Legrand/ Seimens

M&L and fixing inreplacement of MCCB ,4 pole, TPN, 415 volts ,microprocessor based , rated 125 Amps,having repturing capacity 25 KA - 01 No as incomer Make - Schneider cat No. LV429775 in equvelent in Legrand/ Seimens

M&L and fixing inreplacement of MCCB ,4 pole, TPN, 415 volts ,microprocessor based , rated 63 Amps,having repturing capacity 16 KA - 01 No as incomer Make - Schneider cat No. LV429800 in equvelent in Legrand/ Seimens

M&L and fixing inreplacement of MCBs , 240 Volts grade , SPN, single pole and neutral link ,"C" curve , 63 Amps complete all as specified and directed by Engr-in-charge. Make :- legrand/ Seimens / schneider

M&L and fixing inreplacement of MCBs , 240 Volts grade , SPN, single pole and neutral link ,"C" curve , 40 Amps complete all as specified and directed by Engr-in-charge. Make :- legrand/ Seimens / schneider

M&L and fixing inreplacement of MCBs , 240 Volts grade , SP, single pole ,"C" curve , 20 to 32 Amps complete all as specified and directed by Engr-in-charge. Make :- legrand/ Seimens / schneider

M&L and fixing inreplacement of connecting change over switch rating 125 Amps 4 pole, 440 volts grade in sheet metal enclouser conforming to IEC 60947-3, IS/IEC 60947 -3 fixing in panel/ surface of wall on wooden board with making all coonection, gland etc all as site and directed. Make - L&T CO21250OSOO

M&L and fixing inreplacement of connecting change over switch rating 400 Amps 4 pole, 440 volts grade in sheet metal enclouser conforming to IEC 60947-3, IS/IEC 60947 -3 fixing in panel/ surface of wall on wooden board with making all coonection, gland etc all as site and directed. Make - L&T CO21250OSOO

Supply and fixing/laying/ inreplacement of connecting and testing of LT under ground XLPE insulated ,armoured heavy duty electric power cable with aluminium conductor , 1100 volts grade (earthed) cross section area for following size (a) 240 Sqmm x 3.5 core

(b) 150 Sqmm x 3.5 core

(c) 95 Sqmm x 3.5 core

(d) 50 Sqmm x 4 core

(e) 25 Sqmm x 4 core

(f) 16 Sqmm x 4 core

(g) 10 Sqmm x 4 core

(h) 10 Sqmm x 2 cores

Supply and fixing/laying/ inreplacement of commissioning and testing of size 3X95 sqmm cross-ectional area HT under ground XLPE insulated , screened, PVC bedded, galvanised steel strip armoured heavy duty electric power cable with aluminium conductor , 11000 volts grade in tranches/ fixing on wall by saddel/ fixing on poll/ drawn through GI pipes all as spacified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, etc. complete all as specified and as directed.

Returning, filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing surplus excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed..

M&Land laying natural river clean dry send as cushioning for protection of under ground cable, including spreading and punning down all as per cluase No 3.21 of SSR part-1 complete all as specified and as directed by Engineer-in-charge Note :- Punned thickness of sand layer shall be measured abd paid to contractor.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

M&L for cement conrete in foundation filling and mass concrete type C-2 in ration 1;3;6 using 40 mm graded aggregate all as directed.

Supply and fixing/laying/ inreplacement of galvanised steel water tubing light grade bore of dai 80 mm with all fittings all as site and directed. Make - Tata / Jindal / NTL

Supply and fixing/laying/ inreplacement of galvanised steel water tubing light grade bore of dai 40 mm with all fittings all as site and directed. Make - Tata / Jindal / NTL

M&L for jointing/ cutting/ welding/ replacing hinges etc all as site required to gate made out MS angle for making smoth opening and closing complete all as directed.

M&L for jointing/ cutting/ welding/ replacing hinges etc all as site required to LT panel made out MS sheet and angle for making smoth opening and closing complete with re-painting as same macting with exsiting suarface all as directed.

M&L for painting to electric pole steel tubular/ PCC after removing /scraping/ bruses/ cleaning to old paint on external surface in two coats of paint over one coats of red oxide primer by using syenthatic enamel aluminium paint on steel tubular and cement paint on PCC poles in any height/ length/ dai etc including cross arms/ angles, nut, bolt , washers etc and making alternate strip in 30 cm minium width upto 1.5 Mtr above normal GL and marking as direction using diffrent colour of paint with proper stencil of alphabet and numeric of size 50 mm making to after painting numbers of pole LT/HT. complete all as site and directed by Engr-in-Charge. Note : Colour of paint shall be approved by Engr-in-charge.

M&L for painting to two pole structure after removing /scraping/ bruses/ cleaning to old paint on external surface in two coats of paint over one coat of red oxide primer by using synthetic enamel aluminium paint on steel tubular and cement on PCC pole structure in any height/ length/ dia etc ,including cross arms/ angles, nut, bolt , washers etc and making alternate strip in 30 cm minium width upto 1.5 Mtr above normal GL and marking as direction using diffrent colour of paint complete all as site and directed by Engr-in-Charge. Note : Colour of paint shall be approved by Engr-in-charge.

M&L for painting to four pole structure after removing /scraping/ bruses/ cleaning to old paint on external surface in two coats of paint over one coat of red oxide primer by using synthetic enamel aluminium paint on steel tubuler and cement on PCC pole structure in any height/ length/ dia etc ,including cross arms/ angles, nut, bolt , washers etc and making alternate strip in 30 cm minium width upto 1.5 Mtr above normal GL and marking as direction using diffrent colour of paint complete all as site and directed by Engr-in-Charge. Note : Colour of paint shall be approved by Engr-in-charge.

M&L and fixing inreplacement of chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and directed.(Note:-The unit rate is for fixing only of chain link fencing. Chain link fencing and line wire shall be paid at 'Supplied only' rates).

M&L and fixing inreplacement of mild steel work as in flat iron strap with angle iron post for holding chain link fencing,including all necessary drilling holes fixed in position etc and similar work conforming to Fe-290 Gde-E-165 all as specified and directed

M&L for painting using synthetic enamel paint on surface of chain link fancing with posts, struts , strip, bar , gate etc any description n exc 10 cm in width or girth girth when unconnected with other painting in different tint in two coat (one as finishing ) over one coat of red oxide complete all as directed.

M&L cement concrete type D2, 1:2:4 (using 12.5mm graded ssto agg) for coping above groung level of steel electric pole concrete complete all as spacified and as directed.

M&L cement plaster work to cable trench/ transformer plinth protection/ foundation setting coat rendering rubble masonary coursed or uncoursed brought upto course 15 mm thickness in cement motor 1:4 using supper fine sand all as directed.

M&l mixed cement concrete type B-1 graded M- 15 in ratio 1:2:4 nominal size of graded coarse aggregate in 20 mm on transformer pilinth in 50 mm thick all as direted.

M&L and fixing inreplacement of mild steel plates plain or chequered 5 mm thick or over in thickness in size as per exsiting cable trench for giving protection to cable fe 410 -W graded -E- 250 quality B all as specified and directed.

M&L Broken stone or Boulders hardcore of gauge not exc. 63mm, deposited, spread and levelled in layer not exc. 150mm thick, watered and rammed to a true surface, complete all as spacified and directed.

M&L and fixing inreplacement of Sign board size 3.5 M x0.9 M x 100mm box type arrounded by GI angle 'L' type size 25 mm x 4 mm and GI sheet 4 mm with both side fabricated transperants glazed sheet mounting on 25 mm bore GI pipe/ square channel frame and minium height 1.2 Mtrs above normal groud level grouting PCC in foudation including one no 9 watt LED T/L fitting making all connection and control switch complete with weling /cutting/ painting / making etc all as per directed . Note : Indication sign and notice showing on board shall be approved by Engr-in-charge.

Decarbonising/ cleaning of Existing LT panel cubical type of various sizes consists of bus bar and circuit chamber, metering chambers CTs and relays chambers, checking the bus bar joints, bus bar and circuit spouts, cleaning and applying Anti - Track Busbar Insulation Tape to the bus bars , checking the current transformer, applying Monoplast compound at the bus bar joints after tightening of joints ,replaced new suiable size of lugs /suitable copper control cable and reassembling , if any rusted sheet replced with new sheet as per existing size complete all as directed by Engineer-in-Charge. Note:- Cost of lubricant/ cleaning agents (CRC & rust remover) / hardware like springs/ bolts/ nuts/ washers,lugs/ suitable copper cables cost of labour, T&P required for replacement shall be etc. shall be deemed to be included in the rate quoted.

S & F in replacement of LED indicating Lamps for R, Y, B phases complete including taking down ols U/S lamp as specified and directed.

M&L and fixing inreplacement of Digital Ameter ranee 500 Amps with CTs Make ;- L&T/ AE

M&L and fixing inreplacement of earthing complete with copper earth plate electrode 60 cm x 60 cm x 3.15 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below the normal ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to copper strip 20x3 mm as earthing lead by means of bolts, nuts and washers, check nuts made out of copper all as shown on electrical plate No.5 of SSR Part-I connected to earthing test point complete all as specified and directed.

M&L and fixing inreplacement of advance maintenance free chemical earthing with enviornment friendly ring earthing system consisting each set of 03 (three) Nos of 10 (ten) feet length 40 mm dia earth eletrode made of maintenance free electrolytic grade copper earthing system of JMV make based on flat in pipe technology of 3 Mtrs length , 40 mm dia with crystalite conductive mixture COMPOUND filled withthe permanent sealings at the top & bottom with the lead terminal of 25x4 mm size copper with 2 holes of 10 mm dia at the top , to be lowered in 150 mm dai bore including filling of back fill ecofriendly earth enhancing compound tested by ROHS comply to IEC 62651-7 which should have passed leaching ,corrosion, supphur & resistivity test as per IEC 62651-7 by NABL accredit LAB/JAM plus compound in 150 mm bore in immediate contract around the earth electrode and top of the bore shall be finished with 40 mm thick PCC in 1:2:4 type B 1 over 75 mm thick PCC in 1:4:8 type D-2 and backfilly/ JAM compound shall be covererd with FRP pit cover of suitable size for each earth electrode , joint to be made by JAM weld exothermically welded technology including copper strip size 50 x 6 mm for earthing ring system and copper strip 32x6 mm size for earthing electrode to test point with saddles & porcelain insulators suitable size on wall ,earth strip protected by light grade GI pipe 40 mm dia in case of plinth protection / floor/ hard standing crossing complete all as specified and directed. Make - JMV LPS Limited / JEF/ ALCOICE / Conducrete (Ref drawing att) Note :- Earth work , PCC work, PCC cutting work by cutter & testing rate shall deemed to be included in unit rate quoted.

M&L and fixing inreplacement of copper strip 20x3.15 mm with saddles and fixing screws etc for roof conductors above ground level all as specified and directed.

M&L and fixing inreplacement of Test point terminal block made of gun metal or phosphorus bronze in size 75x75x25 mm drilled and screwed including 03 nos ,8 mm dai 25 mm long hex head screw complete all as specified and directed.

Supply and fixing in replacement distribution board 8 way in sheet metal enclousure MCBs to be used triple pole and neutral 4 pole ,415 volts grade, with copper bus bar 100 Amps rated minimium , neutral link in vertical type fixing on surface of wall with mounting on suitable size hard wooden board with nuts ,grouting bolts in surface of wall and washers OR concealed insurface of wall incl plastering and others site works complete all as site requirement incl making all incoming and outgoing connection using suitable size of lugs/ thimbling and jointing kit etc and directed by Engr-in-charge. Make :- Legreand / Seimens/ C&S Note :- Jointing kit with fixing charge shall be measured and paid to conctractor separately.

M&L and fixing inreplacement of New generation energy saving and environmental friendly long life LED street light 48W made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07. Cat Ref: ENDURAPEARLNEOSL45WLED757SASYTOPC of Make: Havells or equivalent in Havells /Philips/ Wipro/Surya

M&L and fixing inreplacement of LED street lights not less than 30W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP65 degree of protection and integrated driver with 10KV surge protection including GI bracket made out of 40 mm dia GI pipe light grade bend to shape of 120 degree with fixing accessories such as braket made out by GI strip ,nutts bolts and washer complete as per manufacturer's instructions. Havells /Philips/ Wipro/Surya

M&L and fixing inreplacement of PVC insulated sheathed multistandred copper conductor cable single core 4 sqmm 1100 Volts grade. Make - Finolex/ Plaza/ Havells

M&L and fixing inreplacement of PVC insulated sheathed multistandred copper conductor cable single core 2.5sqmm 1100 Volts grade. Make - Finolex/ Plaza/ Havells

M&L and fixing inreplacement of Cool White 200 W LED Floodlight, IP Rating: IP65, Body Material: ABS, Wattage: 200W, IP Rating: IP65 Lighting Color: Cool White, Lighting Type: LED

M&L and fixing inreplacement of Hot press moulded Street light pole junction box size 310x285x180 out side dimension single hinged door fitted with one MCB 6-32 Amps and RYBN Connectors, 4 way complete all as directed Make: Sintex or equivalent in United/national

M&L and fixing inreplacement of LED Post top lantern 25 Watt Make: Make Bajaj or equivalent in Crompton/Havells/Surya/Wipro

Material and labour for removing/scraping the paint of FPB / LT Panel by applying two coat of synthetic enamel paint over a coat of red oxide primer as specified and directed by Engineer-in-charge. Make of paint- BERGER PAINTS(LUXOL HIGH GLOSS)/ASIAN PAINT(APCOLITE)

Material and labour for removing/scraping the paint of street light panel applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. Make of paint- BERGER PAINTS(LUXOL HIGH GLOSS)/ASIAN PAINT(APCOLITE)

Material and labour for removing/scraping the paint of centrifugal Pump set of any capacity by applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-charge. Make of paint- BERGER PAINTS(LUXOL HIGH GLOSS)/ASIAN PAINT(APCOLITE)

Supply & Fix capacitor gas filled heavy duty cylindrical of 5 to 15 KVAr, 440V including taking down old unsv capacitors complete all as specified and directed.

Supply & Fix capacitor gas filled heavy duty cylindrical of 20KVAr, 440V including taking down old unsv capacitors complete all as specified and directed.

M&L and fixing inreplacement of Galvanised iron strip 32 x 6mm buried in ground or fixed to Roof, Walls by using appropriate insulating Boxes with screws complete all as specified and directed.

M&L and fixing inreplacement of PVS line seprator suitable for LT OH line (04 run of ACSR) fixng by GI wire proper titting etc all as site requirement complete all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

M/S N S CONSTRUCTION

DEBROYENTERPRISE

M/s. M. G. Babloo Das