Development of Iconic Road at Pethapur for Gandhinagar Municipal Corporation.

Document Name: Schedule - B

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

EARTH WORK & CARRIAGE OF MATERIAL

1) The method of excavation shall be approved by the Engineer in charge before

2) Excavation shall be carried out very carefully without damaging existing structures and

surrounding if any.

3) If required, the contractor shall provide stabilization by any means to protect the

foundation of the existing structure and building without any extra cost.

4) Rate shall include dewatering work (pumping out and removing slush) while execution in

underwater condition if required.

Clearing and grubbing

Clearing and grubbing of top soil, up-rooting rank vegetation, grass bushes, shrubs,

saplings, trees of any girth, any size and any species, removal of stumps of trees cut

1 Sqm 33935.00 ₹ 8.66 Rupees Eight Paise SixtySix Only ₹

earlier, debris of dismantling work, etc. by any means and disposing of all materials for all

lead and all lift at non objectionable place etc. complete as directed by Engineer-in-

Dewatering by pumping set of required capacity including Temporary plateform carting

2 pumping at site fixing the same in position including all accessoriec and fuel and labour Hp/Hr 7880.00 ₹ 18.51 Rupees Eighteen Paise FiftyOne Only ₹

Excavation for all kinds of soil

Earthwork in excavation for all kind of soil by any means including getting out the

Rupees Two Hundred SeventyTwo

3 excavated soil, sorting and stacking of useful material, dressing of the sides, ramming of Cum 3971.06 ₹ 272.57 ₹

Paise FiftySeven Only

bottom, and disposal of surplus excavated earth for all lead within campus area and lift

up to 1.5 mt depth, etc complete as directed by engineer-in-charge.

Excavation for all kinds of soil

Earthwork in excavation for all kind of soil by any means including getting out the

Rupees Two Hundred NinetyFive Paise

4 excavated soil, sorting and stacking of useful material, dressing of the sides, ramming of Cum 45.10 ₹ 295.11 ₹

the bottom, and disposal of surplus excavated earth for all lead within the campus area

and lift from 1.5 mt to 3.0 mt depth, etc complete as directed by engineer-in-charge.

Filling available excavated earth (excluding rock)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations,

plot filling, etc. in layers not exceeding 20cm in depth, with optimum moisture content to

give at least 95% of the maximum dry density (proctor density) including watering, Rupees One Hundred ThirtySix Paise

ramming and compacting by any means, including transportation, loading, unloading, NinetyTwo Only

screening, passes etc. all complete for all lead (from anywhere from the campus area)

and lift and as directed by the Engineer-in-charge

Excavation of asphalt pavement

Excavation of asphalt pavement/ concrete pavement including demolishing of asphalt

Rupees Four Hundred Twenty Paise

6 carpet/ concrete surface, including all sub layer, disposal all material for all lead and lift as Sqm 27568.30 ₹ 420.91 ₹

directed by Engineer in charge.

a) upto 0.60m thickness

Bitumen Cutting

Labour charge of cutting in bituminous pavement before fixing kerb stone. Cutting to be

done with heavy duty tandem cutting machine consist of diamond blade. Minimum cutting

depth shall be 20 cm from the finished level. Cutting shall be perfectly in line. The width

and depth of the removal of asphalt towards kerb stone shall be as directed by engineer Rupees Two Hundred ThirtyOne Paise

in charge. Bitumen shall be carefully removed so that the cutting edge towards the road TwentyNine Only

shall not be disturbed. Bitumen and other debris shall be disposed for all lead and lift at

non objectional place and as per the direction of the engineer in charge. Surroundings

shall be cleaned up to the satisfaction of engineer in charge.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Scarifying/Milling - Road surface

Milling the existing bituminous pavement up to a depth of 100 mm by milling machine in a

single cutting depth to make a uniform surface without disturbing the base, cleaning the

8 Sqm 29839.80 ₹ 65.35 Rupees SixtyFive Paise ThirtyFive Only ₹

milled surface as to avoid slippery including all other incidential charges and other

unforeseen charges etc. disposing of all materials for at non objectionable place etc.

complete as directed by Engineer-in-charge.

Filling of sand

Providing and filling in plinth, under the floor, sunk, subbase of any elements or other

location as per drawing with river sand/ manufactured sand, etc including, watering, Rupees Four Hundred EightyOne Paise

ramming consolidating, and dressing complete for all lead and all lift and as directed by Seventy Only

the Engineer-in-charge.

Carriage of excavated earth/ gravel by mechanical transport including loading,

transporting, unloading, stacking & leveling at the non-objectional location for the lead of Rupees One Hundred Three Paise

5.0 Km beyond initial lead and all lifts, etc complete and as per direction of the Engineer- TwentySeven Only

in-Charge. Item shall be executed after prior approval of the Engineer in charge.

Carriage of excavated earth/gravel by mechanical transport including loading,

transporting, unloading, stacking & leveling at non-objectional location lead beyond

Rupees One Hundred Fifty Paise

11 Km per Km and all lifts, etc complete as directed by the Engineer-in-Charge. The item Cum 17704.50 ₹ 150.64 ₹

shall be executed only after prior approval of the Engineer-in-charge.

Topographical survey work

Carry out complete topographical survey work by the total station along with the existing

or new development area in the site area including taking longitudinal section and cross-

section at every 30-meter stretch width, taking required numbers of spot levels per cross-

section, etc. as suggested by the engineer in charge including marking of the required

number of alignment, taking ground-level details of existing structures/ elements, details of

all existing manholes, catch pits, utility services, light poles, trees (species, height, girth,

the foliage of trees, etc), overhead electrical lines, telephone section pillar/ box, electrical Rupees Thirteen Thousand Seven

12 boxes, PMT including number marked on them, road dividers, footpaths, or all similar 11.00 ₹ 13,725.45 Hundred TwentyFive Paise FourtyFive ₹

elements etc. within construction area and additional areas if required. Only

Rate includes fixing necessary reference pillars, establishing benchmarks, changing

station point, and traverse point, including preparation of accurate required survey

drawings (i.e. plan, longitudinal section, cross-section, etc.).

The contractor shall submit precise survey data in Five (5) numbers of colour hard copies

in the required readable paper size to the Engineer in charge along with a soft copy as

directed by Engineer in charge for execution work.

Conducting Utility survey mapping by Trial pits/ trenches

Conducting Utility survey mapping for the site area/ scope of the work area as per

drawing of the total length and width of each stretch before starting the work and as per

direction of the Engineer in charge. All existing utility services like sewerage, water mains,

stormwater drainage pipelines, telecommunications, electricity, gas lines, other services,

etc. Trial pits/ trenches shall be carried out in the required number, up to the required

depth at the required distance to get precise all utility details (i.e. type of services, the

material of pipe, dimension & depth of pipe, location of chamber and manhole, invert level

of manhole and chamber, and other required detail as suggested by the engineer in

charge) along each utility for final detection and validation of the previous data generated. Rupees TwentyEight Thousand Four

The Contractor shall backfill the trial pit/ trenches with approved material and compact Hundred Fourty Paise FiftyFour Only

properly as per existing.

The contractor shall generate drawings with all underground existing utilities showing all

manholes, junctions boxes, valve chambers, catch pits, ventilating columns, poles, street

lights, and all surface features related to utilities and as suggested by the Engineer in

charge. The contractor shall be responsible for maintaining the existing services network

in its condition without any damage while preparing the trial pit. If any damage happens,

the contractor shall repair and make good up to the satisfaction of the Engineer in

The contractor shall submit the marking of all trial pits with a starting point and get

approval from the Engineer in charge before starting the work. contractor shall submit a

methodology statement with the program of working and get approval from the engineer in

charge before starting the work. The work also includes soil stabilization, barricading,

carting of earth, dewatering (if required), etc as per site condition and as directed by the

Engineer in charge. Length shall be measured for which utility survey mapping has been

done from an approved drawing by the engineer in charge. The length for which the

survey is to be done shall be approved before the execution of work by the engineer in

The contractor shall submit precise utility data based on the survey in Five (5) numbers of

color hard copies in required readable paper size to the Engineer in charge along with

soft copies, CAD copy as directed by the Engineer in charge.

Length shall be measured for which utility survey mapping has been done from an

approved drawing by the engineer in charge.

Total Carried Over to Summary ₹

PLAIN & REINFORCEMENT CEMENT CONCRETE WORK

1) All types of shuttering shall be designed by the contractor and submitted to the

Engineer in charge along with design calculations (if required) and approved by the

Engineer in charge. However, the Stability and compatibility of shuttering shall be the

responsibility of the contractor. Shuttering shall be executed as per the approved shop

drawing. No extra payment shall be made for the above.

2) Rate shall be inclusive of dewatering work (pumping out and removing slush) while

execution in underwater conditions. The contractor shall not claim for dewatering if

3) Rate shall be inclusive of providing grooves, drip moulds, pockets, cut-outs, etc., and

co-ordination of insert sleeves, insert plate (cost of insert sleeves/ plate shall be paid

separately), encasing if any wherever required while casting for all level all height.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Concrete (PCC) of grade - M15

Providing and laying in position Ready mix concrete/ batch mix concrete of cement

concrete (PCC) of grade - M15 cement concrete work, using cement content as per

approved design mix (Min cementitious level as per latest IS 456 shall be maintained)

manufactured in fully automatic batching plant and transported to the site of work in transit

mixer for all lead having a continuous agitated mixer, for reinforced cement concrete work

Rupees Seven Thousand Four Hundred

14 including pumping from transit mixer to site of laying; cost of admixtures in recommended Cum 5395.50 ₹ 7,496.58 ₹

NinetySix Paise FiftyEight Only

proportions as per IS: 9103 to accelerate, retard the setting of concrete, improve

workability without impairing strength and durability; finishing, compacting, vibrating,

curing, dewatering (if required), etc, including the cost of form work (if required) and

removal of formwork, dewatering (if required), etc. complete for all level, all height/ depth

and for all lead and lift and as directed by the Engineer.

Ready mix concrete

Providing and laying in position Ready mix concrete/ batch mix concrete of specified

grade for reinforced cement concrete work, using cement content as per approved

design mix (Min cementitious level as per latest IS 456 shall be maintained) manufactured

in fully automatic batching plant and transported to the site of work in transit mixer for all

lead having a continuous agitated mixer, for reinforced cement concrete work including

pumping from transit mixer to site of laying; cost of admixtures in recommended

proportions as per IS: 9103 to accelerate, retard the setting of concrete, improve

workability without impairing strength and durability; finishing, compacting, vibrating,

curing, dewatering (if required), etc, excluding the cost of Formwork and

reinforcement, etc complete for all elements, all floors, all level, any heights/ depths, any

lead and lift as directed by Engineer Incharge.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

15 Concrete of M 25 grade Cum 476.20 ₹ 7,377.25 Rupees Seven Thousand Three ₹

Reinforcement for R.C.C.

Providing Reinforcement for R.C.C. work including straightening, cutting, bending, placing

in position, and binding (with GI wire) all complete for all leads and lifts, all levels, all floors,

all heights/ depth, etc complete and as directed by the Engineer in charge.

No separate payment shall be made for chairs, pins, lifting hooks, spacers, wastage,

rolling margin, and binding wire.

16 Thermo-Mechanically Treated bars (Fe 500 D) Kg. ######## ₹ 77.29 Rupees SeventySeven Paise ₹

Total Carried Over to Summary ₹

CENTERING AND SHUTTERING

Formwork using any type of suitable material and/ or proprietary system

Providing and fixing formwork using any type of suitable material and/ or proprietary

system formwork to give a fair finish concrete with any shape and any size in plan and

elevation including centering, shuttering, strutting, propping, and removal, etc. height of

propping and centering below supporting floor to ceiling not exceeding 4.50 Mt. and

removal of the same for in-situ reinforced concrete and plain concrete work, etc complete

and as directed by the engineer in charge.

a) Form work for Foundations, footings, bases of columns, sides of the raft, base PCC,

Rupees Two Hundred Eighty Paise

c) Formwork for Wall

RCC walls of any thickness including attached pilasters, buttresses, plinth, and string

courses, etc including the cost of tie bolt and heavy duty PVC pipe sleeve (above plinth),

left in concrete spring coil and plastic cone assembly/ water barrier tie rod assembly

(below plinth, water retaining structures) and removing the PVC cone, spring, sleeve, etc

Rupees Three Hundred FourtyTwo

18 and grouting the same with non-shrink grout/ ready mix patch repair mortar for concrete Sqm 165.00 ₹ 342.71 ₹

Paise SeventyOne Only

complete as per the direction of Engineer-in-charge. Length and diameter of tie rod

assembly shall be as per thickness and height of wall. The contractor shall get prior

approval of tie rod assembly and water barrier.

(Horizontal/ vertical lines shall be matched for each shuttering panel).

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

d) Formwork for Slabs, Suspended floors, roofs, landings, balconies, and access

Rupees Three Hundred SixtySix Paise

19 platforms etc. Sqm 573.20 ₹ 366.09 ₹

Rupees Three Hundred Two Paise

20 e) Formwork for beams, Lintels, girders etc. Sqm 1580.70 ₹ 302.62 ₹

Exposed concrete formwork

Extra for Providing and fixing formwork for exposed concrete surfaces with pattern

(vertical or horizontal surface or any shape) for any elements in desired pattern and size

as per drawing and specifications using any type of formwork material and system to

achieve desired finish as per approved sample for any type of RCC elements including

neat cleaning the exposed concrete surface, as directed by the engineer-in-charge.

Formwork material and system shall be approved before execution. Rate shall be

applicable for all levels, all places and all shapes. The contractor shall submit shuttering

pattern/ shop drawing including tie-rod hole position, architectural groove based on

architectural conceptual design with control line. Item shall be executed only after

Rupees Five Hundred FourtyFive Paise

21 shuttering pattern approved by Architect and engineer in charge. Same kind of shuttering Sqm 138.00 ₹ 545.86 ₹

material shall be only used for standard and residual sizes. These areas shall be entirely

free from honey combing, stains, fins, lipping, nail or screw marks, raised grain marks, air

holes or any other imperfections; bulging, and also having even shade, texture, level

throughout. Mock up for all exposed work to be prepared by contractor and got approved

from architects in all respect prior to concrete production. Architect reserves right to

reject part or all work of sub standard or not in confirmation to sample approved as per

mock up. Contractor shall get prior approval for reuse the shuttering material for

repetition from Engineer in charge.

Rates shall also include the cost of providing architectural groove of required size,

pattern in concrete work, rendering (if required) as per drawing, cut-out etc in formwork.

Total Carried Over to Summary ₹

WATERPROOFING WORK

1) All waterproofing treatment/work shall be executed through an approved water-proofing

agency of an approved manufacturer. The Contractor shall submit technical data sheets

for each product that will be used for execution.

2) The Contractor shall submit a methodology statement with all relevant details in

illustrative sketch form and get them approved by the Engineer-in-charge.

3) A written guarantee/bond on non-judicial stamp paper (tri-party) shall be submitted by

the main Contractor and provided by the principal manufacturer and applicator, who has

carried out the work. The guarantee/bond shall be for a period of ten years from the

certified date of completion of the overall work. The guarantee shall be for a composite

warranty against leakages/seepage/dampness and for the satisfactory performance of

the entire waterproofing system.

4) Waterproofing shall be executed under the supervision of the technical team of the

manufacturer. Waterproofing shall be tested and approved by the Engineer-in-charge

before proceeding with subsequent activities.

5) The Contractor shall repair the concrete elements by injection grouting of suitable non-

shrink grout and other suitable methods in case of defective concreting of retaining walls,

water tanks, slabs, beams, etc., for which no extra costs shall be payable.

6) Rate shall be inclusive of surface preparation, repairing, injection grouting, saw cutting

of construction joints and filling with patch repair mortar, making polymer mortar/Polymer

CC fillets at horizontal as well as vertical corners, etc complete. The rate shall be

inclusive of testing of elements and the system before and after waterproofing

7) Rate shall be inclusive of dewatering work (pumping out and removing slush) while

execution in under water conditions.

8) The latest technical system/product shall be adopted at the time of execution.

6) Rate shall be inclusive of surface preparation, repairing, injection grouting, saw cutting

of construction joints and filling with patch repair mortar, making polymer mortar/Polymer

CC fillets at horizontal as well as vertical corners, etc complete. The rate shall be

inclusive of testing of elements and the system before and after waterproofing

Rupees Six Hundred Seven Paise

22 application. Sqm 70.40 ₹ 607.67 ₹

SixtySeven Only

7) Rate shall be inclusive of dewatering work (pumping out and removing slush) while

execution in under water conditions.

8) The latest technical system/product shall be adopted at the time of execution.

Pipes being fixed for plumbing shall be fixed in holes that are mechanically core cut, more

than the diameter of the pipes. Pipes shall be fixed by grouting the annular space with non-

shrink cementitious grout of proprietary make. Before grouting, the pipes shall be

wrapped with a two-way self-adhesive tape at least 50mm wide and then grouted to fill in

the grout, ensuring total watertight plumbing fittings. The Contractor shall submit a

methodology statement with all details in illustrative sketch form and get approval from the

Engineer-in-charge. Application shall be carried out by the approved applicator of the

manufacturer and as per the manufacturer's recommendation The actual applied area on

the floor & wall shall be measured for payment. Cost includes all material (for surface

preparation, coating, and hole packing), labour, T&P, and wastage involved as mentioned

M25 Grade concrete screed for leveling

Supplying and laying M25 grade vibrated concrete screed in proper slope and gradient

including saw cutting (approx. 6mm W x 30mm D) at 3m x 4m panels or less size, making

angle fillet of 50mm x 50mm at the corners using M25 grade concrete and filling the

grooves with PU sealant (minimum 20 mm depth over PE backer rod). If Screed concrete Rupees Eight Thousand EightySix Paise

shall be laid over on existing concrete surface, a bonding agent shall be applied before Six Only

laying of concrete. Cost includes all material, labour, T&P, and wastage involved as

mentioned in the item. Reinforcement, if required, shall be paid under relevant agreement

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Integral crystalline slurry - RCC structures

Providing and applying integral crystalline slurry, hydrophilic in nature, for waterproofing

treatment (surface coating) of approved make to any type of concrete structure etc.

prepared by mixing in the ratio of 5: 2 (5 parts integral crystalline slurry: 2 parts water) for

vertical surfaces and 3: 1 (3 parts integral crystalline slurry: 1 part water) for horizontal

surfaces with required consumption as per manufacturer's specification and applying the

same from negative (internal) side. The material shall meet the requirements as specified

in ACI - 212-3R-2010 i.e. by reducing the permeability of concrete by more than 90%

compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic Rupees Two Hundred NinetyTwo Paise

pressure on the negative side. Ten Only

The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm.

Rate shall be inclusive of surface prepration, grouting of any type of damage, crackes,

joints etc using crystline mortar, construction joint tie hole treatment, and honey comb

concrete treatment as per manufacturer's specifications etc complete for all level, all

Work shall be carried out by approved applicator and as per method of waterproofing

accepted by manufacturer and as directions of the Engineer-in-charge.

Swellable type water stop bar

Providing and applying of controlled swellable type water stop bar, of approximate size

20mm x 10mm, non-bentonite type (expansive nature) of an approved make for

construction joints treatment for RCC structure, such as raft slab, retaining walls, water

storage tank and at junctions of raft slab with retaining walls etc. For provision of swellable

bar, the Contractor shall provide shear key in the wall and the raft. After cleaning the

shear key, one coat of required primer for swellable water stop tape shall be applied Rupees One Thousand Six Hundred

throughout the length of the joint as per the manufacturer's specifications. The swellable SeventyEight Paise Seven Only

type water stop bar shall be placed over the primed surface. The work shall be carried out

as per the specifications and the direction of the Engineer-in-charge. The product

performance shall be guranteed for 10 years against any leakage.

Size of the swellable bar shall be as per the manufacturer’s recommendation and as per

the approved system by the Engineer-in-charge.

China Mosaic flooring

Providing & laying china mosaic flooring for plain and curved surfaces, comprising of

to 25 mm size broken white/colour pieces of ceramic/glazed tiles laid over 12 to 15mm

thick cement mortar, 1:6 (1 cement: 4 coarse sand) bedding including applying cement

slurry at the rate of 2.75 kg per sqm on plain or sloped surfaces with joints not exceeding

5 mm, including filling the gaps with white cement mixture & mixing with synthetic polyester

fiber, triangular in shape having specific gravity of 1.34 to 1.40, cross-section size

ranging from 10 to 40 micron & length up to 6mm, mixing fiber @ 125 grams per 50kg of

Rupees Nine Hundred ThirtyEight Paise

26 cement in cement mortar, including providing and mixing waterproofing material in mortar Sqm 110.00 ₹ 938.50 ₹

@ 1 kg per 50 kg of cement, all complete as per the direction of the Engineer-in-charge.

The flooring shall be tampered with a wooden rammer not exceeding 2 Kg in weight to

bring the mortar up to the surface, including rounding of the junctions and extending them

up to 150 mm. along the parapet wall. The rate shall include bands if a different colour is

used, any pattern or design as per drawing and direction, making vata/ fillet, curing,

cleaning with water and oxalic acid, etc. complete. Only the Plan area shall be measured

Providing and applying Coal tar extended epoxy resin coating of approved make in

two coats having 250 +/- 10 micron DFT on RCC surface as per following steps and as

per manufacturer's specifications with coverage recommended 3.0 – 4.0 Sqm/ litre for

two coat application to achieve approx. 250 +/- 10 micron DFT:

1) Proper surface preparation, remove dirt, rust, oil, grease, cement slurry from wall

surface. Thoroughly clean the concrete surface with wire brush/ compressed air etc

2) Carry out cementitious injection grouting at construction joints and at leakage points

using plasticised expansive grout admixture,

3) Treatment of construction joints using polymer modified mortar, Rupees Three Hundred Sixteen Paise

4) Filling pipe cutouts using non shrink cementitious grout, SeventyFour Only

5) Mixing base and hardener component of coal tar extended epoxy resin coating, apply

first coat using suitable brush or roller, allow the first coat to dry

6) Application of second coat in perpendicular direction to first coat as per

manufacturer’s specification.

Coal tar epoxy shall be having 100% solid contents by weight, specific gravity - min 1.24,

Water absorption <0.01 % (ASTM D 570), Bond Strength: min 1 N/mm2 (BS 1881 Pt

207), Water Permeability: nil at @ 2 bars pressure over 3 months.

Actual applied area of coal tar epoxy shall be measured for payment.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Total Carried Over to Summary ₹

Providing and laying Brick masonry works using common burnt clay bricks confirming to

IS 1077-1992 having Compressive strength not less than 35 kg/Sq.cm in cement mortar

1:5 (1 cement: 5 coarse sand) in any shape, any thickness including finishing, curing, Rupees Four Thousand Three Hundred

scaffolding racking / flush jointing, etc. complete for all level, all depth/height, as per FourtyOne Paise FiftySeven Only

drawing and as directed by Engineer in Charge.

(ii) Half brick masonry in common brunt clay building bricks having crushing strength not

Rupees Six Hundred TwentyFour Paise

29 less than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in foundation Sqm 59.40 ₹ 624.96 ₹

and plinth (B) Conventional

Total Carried Over to Summary ₹

12-15 mm thick plaster

Providing and laying 12 to15 mm thick single coat mala cement plaster on masonry work/

concrete work in cement mortar (1 Cement : 3 coarse sand) finished with trowel including Rupees Two Hundred ThirtySix Paise

making drip moulds, grooves forming pattas, scaffolding, curing etc. complete for all level, Three Only

all shape and as directed by Engineer in Charge.

Average 20 mm thick plaster - cement mortar

Providing and applying an average 20 mm thick double coat mala plaster on any type of

internal/external surface in a backing coat of 12 mm thick cement mortar 1:4 (1 cement:

coarse sand) finished with a top layer of 6 mm thick cement mortar 1:2 (1 cement: 2 Rupees Two Hundred EightySix Paise

sand), finished with a trowel including curing, making grooves, forming pattas, scaffolding Eleven Only

in any shape for all floors, all levels, all heights etc. complete as directed by the Engineer-

in-charge. The rate shall be inclusive of provision of groove, drip mould as per the issued

drawings, etc. complete and as directed by the Engineer-in-charge.

12 to 15 mm thick water proof Plaster

Providing and laying 12 to 15 mm thick water proof single coat smooth / wired finish

cement plaster on sides of masonry work / block work / RCC work, in any shape, in CM

1:3 (1 cement : 3 fine sand) and water proofing compound of approved make in Rupees Two Hundred EightyFive Paise

proportions recommended by the manufacturer, finishing the surface wired finish/ smooth TwentyNine Only

finish with a floating coat of neat cement slurry for all floors, all height including hacking to

RCC surface, scaffolding, curing etc. complete as directed by engineer-in-charge.

Total Carried Over to Summary ₹

DOOR WINDOWS WORK

1. All loose samples of materials shall be approved by the Engineer-in-charge.

2. All adhesives and sealants shall be with low VOC and lead-free with acceptable VOC

content as per GRIHA requirements.

3. The Contractor shall prepare a shop drawing based on the Design Intent / Concept

Drawings and get approval from the Engineer-in-Charge. The Contractor shall prepare

mock-up of doors, windows, and other elements with all required hardware and get

approval from the Engineer-in-Charge before execution of work. Work shall be carried

out as per the final approved shop drawing and approved mock-up. The Contractor shall

be responsible against stability, safety, leakage, etc all complete. Testing work shall be

carried out by the Contractor as suggested by the Engineer-in-charge. (If required).

4. All types of locks shall be with computerized 3 No. keys (SS 304/ brass) and master

keys (if mentioned in the nomenclature of the item). The grouping of master keys shall be

as suggested by the Engineer-in-Charge. Nothing extra shall be payable for the master

5. All doors, windows, and other elements shall be fabricated and finished at the

factory/workshop, and only fixing and final finishing shall be executed at the site unless

otherwise approved by the Engineer-in-charge.

6. Work for doors, windows, and other elements shall be carried out for all floors, all

levels, all heights, and all places including loading, unloading, stacking, transporting,

hoisting, and erecting by any means (mechanical or manual).

7. All silicone sealant shall be grey in colour or as directed by the Engineer-in-charge.

8. All types of coating (polyester powder coating, anodizing and PVDF coating for

aluminium work shall have minimum 15 years of life).

Aluminium work for door/window/louvers/ventilators etc. frame and shutter

Providing and fixing in position frames/ shutter for any type of aluminium work like

aluminium door, composite door-window, window (sliding, openable, side hung, top hung,

fixed etc.), aluminium partition, aluminium fixed louvers, fixed window with any type of

aluminium sections of approved make and finished with minimum 50 micron pure

Rupees Five Hundred TwentyFour

33 polyester powder coating of approved shade, texture & colour of approved make for all Kg. 198.00 ₹ 524.40 ₹

Paise Fourty Only

floors/ all levels/ all heights/ all shapes/ all sizes including cutting, bending, crimping,

fabricating in best workmanship manner etc as per the drawing, and as directed by

Engineer-in-Charge.

Rate shall be inclusive of providing any type of aluminium sections, cutting, fabrication,

hoisting and fixing.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

1) Sheet metal screws and casted solid aluminum corner cleats fixed with a spring for

rapid and secure joint assembly for any type of shutter and frame;

2) Glazing clips for receiving infill panel;

3) Best quality wool pile where ever shutter touches the frame and compatible microwave

cured EPDM rubber;

4) Dash Anchor fasteners ofapproved make and capacity for fixing the frame assembly

to the RCC or masonry surfaces. Minimum 1 anchor fastener shall be used for every

mm length of section for stability of frame.

5) 10mm GI tie rod for connecting vertical stile at top and bottom for aluminum door

shutter and 4mm thick solid aluminium corner cleat of full thickness of section for

connecting stile and horizontal rails;

6) providing and fixing packing at every 600mm c/c of PVC shims of required size;

7) Filling the gap between wall and frame on both sides (outside and inside) with

polyethylene baker rod of avg. 10 mm dia of approved make and colour and then sealing

the remaining gap with neutral grade weather silicon sealant of approved make and color.

8) Termite treated seasoned teak wood as infill material to installe hardware in door

shutter and frame as and when required

but excluding. 1) necessary hardware; 2) Glazing or panelling material and shutter.

Contractor shall prepare shop drawing and get approved from the Engineer in charge

before procurement of material. All loose samples shall be approved. Work shall carried

out as per the approved shop drawings and approved sample. Actual weight of installed

Aluminium sections which are used shall be measured for the payment. Contractor shall

be responsible for stability, water tightness of door window work.

Providing and fixing glass in the door, window, ventilation, fixed glazing, partitions, etc. for

all levels, all floors, all heights with EPDM rubber/neoprene gasket, etc. complete as per

the issued drawings and directions of the Engineer-in-charge. (Cost of beading shall be

covered under basic item). Glass shall be of any shade, any size, any shape of approved

make as per issued drawing and confirm to IS:2835 or IS:2553. The sample shall be

approved before execution of the work. The installed area shall be measured for payment

without considering any wastage.

34 a) With clear toughened glass panes of 6.0 mm thickness Sqm 11.00 ₹ 1,587.22 Rupees One Thousand Five Hundred ₹

SS 304 Butt hinges

Providing and fixing SS 304 butt hinges in matt stainless steel finish of specified size of

an approved make for all levels, all floors, and all heights for any type of door, with

required SS 304 screws, etc. complete. The rate shall be inclusive of fixing as per the

manufacturer’s specifications and maintaining it in good working condition. The

Contractor shall arrange loose samples for approval from the Engineer-in-Charge before

procurement and execution.

35 b) 100 x 75 x 3 mm - With ball bearing No. 11.00 ₹ 537.73 Rupees Five Hundred ThirtySeven ₹

Mortise Deadlock for single/double door shutter

Providing and fixing a set of mortise deadlock (without latch) for single/double shutter

door, including strike plate SS 304, and prepared for 60/70 mm length of standard Euro

profile pin cylinder as per DIN 18251-1, grade 2 of an approved make with both side key,

one side key/one side knob, one side key/slot operation with pair of SS 304 matt finish Rupees Two Thousand Three Hundred

36 escutcheons (keyhole plate) in any approved shape for any type of doors with necessary Set 11.00 ₹ 2,359.16 ₹

FiftyNine Paise Sixteen Only

SS 304 screws, etc complete as per the issued drawing and as directed by the Engineer-

The rate shall be for all heights, all floors, and all places. The lock shall have 3 number

computerized keys. The Contractor shall arrange loose samples for approval from the

Engineer-in-Charge before mass procurement and execution.

SS 304 Grade Push-Pull handle

Providing and fixing SS 304 grade push-pull pair of handles in matt finish of specified

size, specified shape i.e. H-shape/D-shape/offset shape (dent free at the bending point)

for door, window, etc. of an approved make for all levels, all floors, and all heights for any

type of door, with required SS 304 screws, accessories, and pin of the required size for

fixing, etc. complete. The rate shall be inclusive of fixing as per the manufacturer’s

specifications and maintaining it in good working condition. The Contractor shall arrange

loose samples for approval from the Engineer-in-Charge before mass procurement and

Elevation length shall be considered for length of handle.

37 b) 300 mm long, pipe of size 22mm dia x 1mm (thickness of pipe) Pair 5.50 ₹ 1,356.23 Rupees One Thousand Three Hundred ₹

SS 304 Tower bolt

Providing and fixing SS 304 grade tower bolts in matt finish of specified size, and

specified shape (with or without flap) for doors, windows, transom, etc. of an approved

make for all levels, all floors, and all heights for any type of door, with required SS

screws and accessories of the required size for fixing, etc. complete. The rate shall be

inclusive of fixing as per the manufacturer’s specifications and maintaining it in good

working condition. The Contractor shall arrange loose samples for approval from the

Engineer-in-Charge before mass procurement and execution.

b) 300 mm x 10 mm rod size Rupees Seven Hundred EightyThree

Paise FiftyOne Only

SS 304 door stopper

Providing and fixing SS 304 door stopper in matt finish with or without magnet, lever type,

shutter mounted/wall mounted/floor mounted of approved make, type, size as per

requirement etc. for all levels, all floors, and all heights for any type of door, with required

Rupees Four Hundred ThirtySeven

39 SS 304 screws and accessories of the required size for fixing, etc. complete. The rate No. 11.00 ₹ 437.03 ₹

Paise Three Only

shall be inclusive of fixing as per the manufacturer’s specifications and maintaining it in

good working condition. The Contractor shall arrange loose samples for approval from

the Engineer-in-Charge before mass procurement and execution.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

ALUMINIUM POWDER COATED HARDWARE

Aluminum powder coated single point lock (without locking arrangement)

Providing and fixing Aluminum powder coated single point lock with mortise handle/ inbuilt

flush handle (without locking arrangement) of required capacity of an approved make and

shade for internal/external shutter as per the approved sample with necessary screws

(as supplied with product only), handle, connector, extension, nib, nib holder, counter

plate, fork, pawl, polyamide strip, connection pin, rod terminal, locking point, striker and

corner transmission etc. complete for all levels, all floors, and all heights as directed by

the Engineer-in-charge.

The rate shall be inclusive of fixing as per the manufacturer’s specifications and

maintaining it in good working condition. The Contractor shall arrange loose samples for

approval from the Engineer-in-Charge before mass procurement and execution.

40 a) For aluminium sliding doors and window shutter No 3.30 ₹ 2,188.93 Rupees Two Thousand One Hundred ₹

Roller for sliding window

Providing and fixing teflon roller bearing set with reinforced nylon casing for aluminum

sliding door and window shutter of required size and capacity (twin or single wheel

according to the weight and size) of an approved make, for internal/external shutter as

Rupees Three Hundred NinetyNine

41 per the approved sample with necessary SS 304 screws, etc. complete for all levels, all No 3.30 ₹ 399.21 ₹

Paise TwentyOne Only

floors, and all heights as directed by the Engineer-in-charge.

The rate shall be inclusive of fixing as per the manufacturer’s specifications and

maintaining it in good working condition. The Contractor shall arrange loose samples for

approval from the Engineer-in-Charge before mass procurement and execution.

Metal door with frame and shutter (Non fire rated)

Providing and fixing of Hollow steel door frame at all levels from ISO 9001-2000 certified

Manufacturer. Pressed Galvanized steel Single /Double leaf to required sizes of

approved make which consists of frame, shutter, infill and finish as detailed below and

conforming to IS

Door frame shall be single rebated profile of size 100 x 50mm with bending radius of 1.4 Rupees Eight Thousand Two Hundred

mm having 1.20 mm thick galvanized steel sheet (18 gauge) in approved shade. Frames Eleven Paise EightyOne Only

should be Mitered and field assembled with self tabs. Frames should be fixed with back

plate bracket and anchor fasteners of approved size and make for installation on a

finished plastered masonry wall opening. Once frame installed should be grouted with

cement slurry if recommended on the clear masonary opening.

Steel door shutter shall be of 46 mm thick, fully flush, double skin door shall be

manufactured from 0.8mm thick galvanized steel sheet with vision glass. The infill material

shall be resin bonded honey comb Kraft paper with thermal insulation. Door frames and

shutter shall be finished with powder coating in desired shade.Rate shall include for

supply and fix 3 mm thick base plates, all joints of frames with provision for anchor bolt

fixing to wall / RC surface, reinforcement pad for fixing of door closers, factory finish, pre-

punched cut outs to receive hardwares and iron mongery, 3 mm thick hinge plates

predrilled to receive hinges for screw mounted fixing, dust proofing arrangement for

complete door and threshold at the bottom as per drawing etc complete for all floor all

height and as directed by architect and Engineer in charge.

All door shutter and frames shall be finished with etched primer coating, stove zinc

phosphate primer and thermosetting polyurethane aliphatic grade paint of approved

colour. The door shutter and frame shall have passed minimum 250 hours of salt spray

test. Rate shall include supply and installation of door shutter with frame, anchor, vision

lite (if required) etc but exclude the cost of hardware etc complete as directed by

engineer in charge. Out to out area of door shutter with frame shall be measured for

Total Carried Over to Summary ₹

FLOORING AND DADO/CLADDING WORKS

1) All natural stones shall be free from cracks, lines, stains, and efflorescence spots, and

even in shade for all kinds of stonework.

2) All natural stones shall be selected and sorted for uniform colour, figure, and thickness

and approved by the Engineer-in-Charge prior to procurement.

3) All natural stones shall be from the same lot and/or source (stone quarry) for the same

kind of work to avoid shade variation and as approved by the Engineer-in-Charge.

4) All types of loose and laid samples of flooring shall be approved by the Engineer-in-

5) The Contractor shall apply an approved Stone Impregnation primer/sealer coat on both

sides and all edges (after cutting and finishing the stone as per size) of stones, a

minimum of two coats as per the manufacturer's specifications and as directed by the

Engineer-in-Charge. No extra payment shall be made for the same.

6) The Contractor shall co-ordinate and execute for all services in the flooring and wall

lining/cladding work i.e. making openings/cut-outs for any services (i.e. manhole cover/

elevator operating panel in the lift wall cladding, raceways in flooring, junction boxs, etc),

and making good as per the satisfaction of the Engineer-in-Charge.

7) All stones shall be cut to size by water jet cutting/laser cutting/ CNC machine according

to the design and shape for the best workmanship etc, according to the design and as per

the approved shop drawing.

8) All adhesives and sealants shall be compatible with the material as per IS 15477 and

as per the manufacturer's specifications and lead-free with acceptable VOC content as

per Green buildings requirements.

9) The finished floor surfaces shall be protected with 12mm thick POP sheets over LDPE

sheets up to the handling over of the Project. The treads of the stairs shall be protected

with a metal/plywood angle to avoid damage to the edges of the treads. POP shall not

directly (or with the use of paper) be applied on the flooring.

10) The screed below the flooring/base mortar thickness shall be as per the drawing. In

case of any type of stone/tile, it shall be fixed with an adhesive and the total thickness of

base mortar/screed shall be paid as per relevant Tender items.

11) All stones shall be factory cut and factory finished. Polish or any type of texture finish

on any stones shall be as per the satisfaction of the Engineer-in-Charge. .

12) Flooring and wall cladding/lining work shall be carried out for all floors, all levels, all

heights, and all places.

15) The rate shall be inclusive of all types of wastage for all materials.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Kota stones - for flooring - fixing with cement mortar

Providing and laying machine-cut Kota stones of specified thickness, specified finish, any

shade (uniform), any size, and any shape for flooring in required design and patterns as

per the drawings, laid over an average bedding of 40 mm thick cement mortar 1:4 (1

cement: 4 coarse sand), and joined (paper joint) with grey/white cement slurry mixed with

a pigment to match the shade of the slabs, including finishing, rubbing, curing, polishing,

cleaning, protection, scaffolding, wastage, etc. all complete, for all levels, all floors, all

heights, as specified and as directed by the Engineer-in-Charge.

The rate shall be inclusive of Kota stones (as per the approved sample), fixed with

cement mortar bedding, cement slurry, matching pigment, all labour, etc complete, but

excluding additional cement mortar bedding/concrete screed bedding (if required as per

the drawing) which shall be payable under the relevant Tender items. The Contractor shall

arrange loose samples for approval from the Engineer-in-Charge before mass execution.

The actual laid area of the Kota stones shall be measured for payment without

considering any wastage.

25 mm thick polished Kota stone Rupees One Thousand Six Hundred

FiftyFour Paise Eight Only

Kota Stones - for skirtings - fixing with adhesive

Providing and laying machine-cut polished Kota stones of specified thickness, specified

finish, of any shade (uniform), any size, and any shape for skirtings (flush with plaster or

adjoining surface) as per the drawings, laid in any pattern, fixed on any type of leveled

surface with minimum 6mm thick stone fixing adhesive as per IS-15477 of an approved

make and joined (paper joint) with grey cement slurry mixed with a pigment to match the

shade of the slab, including providing 6 to 10mm wide grooves between the skirting and

the plaster, finishing, rubbing, curing, polishing, cleaning, protection, scaffolding, wastage,

etc. all complete, for all levels, all floors, all heights, and as directed by the Engineer-in-

Charge. The length of stone for skirting shall be as per design to match the joints and

pattern. The shade of the skirting must match with flooring if not specified elsewhere.

The rate shall be inclusive of Kota stones (as per the approved sample), adhesive for

fixing, cement slurry, matching pigment, all labour, etc complete. The Contractor shall

arrange loose samples for approval from the Engineer-in-Charge before mass execution.

The actual laid area of the Kota stones shall be measured for payment without

considering any wastage.

8 - 10 mm thick polished kota stones Rupees One Thousand Nine Hundred

TwentyOne Paise ThirtyThree Only

Ceramic tiles - For flooring - fixing with cement mortar

Providing and laying 6mm to 8mm thick Ceramic tiles of approved make, of any shade

(uniform), any finish, any shade, any color, any size and any shape for flooring in required

design and patterns as per the drawings, laid over average bedding 40 mm thick cement

mortar 1:4 (1 cement : 4 coarse sand), and joined with a groove or without groove with

grey/white cement slurry mixed with a pigment to match the shade of the tiles, including

finishing, cleaning, protection, scaffolding, wastage, etc. all complete for all levels, all floor,

all height, as specified and as directed by the Engineer-in-Charge. Rupees Nine Hundred SixtyEight Paise

45 Rate shall be inclusive of ceramic tile (as per the approved sample), fixed with cement Sqm 35.20 ₹ 968.34 ₹

ThirtyFour Only

mortar bedding, cement slurry, matching pigment, all labour etc; complete but excluding

filling with epoxy grout (if required) and additional cement mortar bedding/ concrete

screed bedding as per drawing which shall be payable under relevant Tender item. The

contractor shall arrange loose Samples for approval from the Engineer-in-Charge before

mass execution.

The actual laid area of the Ceramic tiles shall be measured for payment without

considering any wastage.

Ceramic tiles - For dado/skirting/risers - fixing with adhesive

Providing and laying 6mm to 8mm thick Ceramic tiles of approved make, of any shade

(uniform), any finish, any shade, any color, any size and any shape for dado, skirting,

risers of steps and pillars laid in any pattern over any type of levelled surface fixed with

minimum 6mm thick tile fixing adhesive (water based) conforming to IS: 15477 of

approved make and joined with groove or without groove with grey/white cement slurry

mixed with a pigment to match the shade of the tiles, including providing 6 to 10mm wide

groove between wall tiles and plaster edge treatment, finishing, cleaning, protection,

Rupees One Thousand One Hundred

46 scaffolding, wastage, etc. all complete for all levels, all floor, all height, as specified and as Sqm 70.40 ₹ 1,104.14 ₹

Four Paise Fourteen Only

directed by the Engineer-in-Charge.

The rate shall be inclusive of ceramic tile (as per the approved sample), adhesive for

fixing, cement slurry, matching pigment, all labour etc complete but excluding filling with

epoxy grout (if required) which shall be payable under relevant Tender item. The

contractor shall arrange loose Samples for approval from the Engineer-in-Charge before

mass execution.

The actual laid area of the Ceramic tiles shall be measured for payment without

considering any wastage.

Additional Floor bedding with concrete screed :

Cement concrete pavement/ flooring/ for additional floor screed with M10 grade, including

Rupees Seven Thousand Seven

spreading as per gradient, levelling, finishing and curing complete as directed by

47 Cum 5.50 ₹ 7,794.88 Hundred NinetyFour Paise EightyEight ₹

Engineer in charge. Actual laid volume for floor bedding shall be measured for payment

without considering any wastage.

Total Carried Over to Summary ₹

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

1) All adhesives, sealants & paint shall be water based, with low VOC with acceptable

VOC content as per Green Building Norms requirements and lead free.

2) Paint shall be applied after thoroughly brushing the surfaces, free from mortar dropping

and other foreign matter, preparing the surface even and sand papered smooth etc, after

applying every coat of putty and primer complete.

3) Contractor shall furnish warranty paper, wherever applicable.

4) If necessary more coats shall be applied till the surface presents a uniform

appearance without any extra cost.

5) Paint shall be applied with any means (i.e. brush, roller, spray etc)

6) Contractor shall prepare sample of minimum three shades as suggested by engineer

in charge for approval.

7) The rate shall be applicable for all floor, all level, all height by any means of scaffolding.

White cement-based putty

Providing and applying white cement-based putty of average thickness 1 mm, of approved

Rupees FiftyTwo Paise NinetyEight

48 make and manufacturer, over any surface to prepare the surface even and smooth Sqm 105.60 ₹ 52.98 ₹

complete for all floor all height all levels.

Providing and applying priming coats with the primer of approved make and manufacture,

having low VOC (Volatile Organic Compound) content, Modified acrylic, water-based Rupees ThirtyThree Paise EightyNine

alkali-resistant primer with low VOC over any surface to complete for all floors all heights Only

Acrylic emulsion paint - interior grade

Providing and applying premium acrylic emulsion paint (superior quality) of interior grade

Two coats of interior grade premium acrylic emulsion paint of approved make and shade

with highly washable, Anti fungal, anti bacterial, scratch resistant and scrub resistance

50 Sqm 176.00 ₹ 58.69 Rupees FiftyEight Paise SixtyNine Only ₹

property, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of

approved brand and manufacture, on wall/ ceiling/ false ceiling/ partition etc including

applying additional coats wherever required to achieve even shade and colour.

Acrylic emulsion paint with primer - Exterior grade

Providing and applying 100% Acrylic Smooth exterior paint with exterior primer of Two or

more coats of paint including required number of priming coat of exterior primer as per

manufacturer's specification of approved make and shade, having VOC (Volatile Organic Rupees One Hundred FourtyOne Paise

Compound) content less than 50 grams/ litre of required shade over any surface etc FourtySix Only

complete for all floors all heights all levels. Exterior paint and primer shall have minimum

years warranty.

Stain-repellent transparent coating - For exposed concrete work

Providing and applying water-based, low VOC, breathable and biodegradable, water, oil,

and stain-repellent transparent fluorocarbon-based coating with anti-graffiti properties

(suitable product according to natural stone, exposed concrete work, exposed brickwork)

of approved make having fluoro carbon-based nanotechnology at all heights & leads and

wherever instructed by Engineer-In-Charge. The treatment shall be in two coats wet-on-

wet or as recommended by the approved manufacturer including preparation of surfaces

by cleaning, curing, protecting, independent double-legged scaffolding, etc complete. The Rupees Two Hundred TwentySix Paise

rate includes the cost of all materials, their application by specialized applicators by spray Fourty Only

coating with an airless sprayer, cleaning the substrate of all laitance, construction dust,

contaminants, double scaffolding, labour, etc., all complete and at all levels, leads and

heights as per particular specification & directions of Engineer-in-Charge. Guarantee

Bond in the prescribed proforma shall be executed by the contractor for the satisfactory

performance of the application for 10 years. The look and feel of the natural stone

surface, Exposed brickwork and exposed concrete shall not be affected by coating.

Total Carried Over to Summary ₹

1. All adhesives, sealants & paint shall be with low VOC with acceptable VOC content as

per GRIHA requirements and lead free.

2. Contractor shall prepare shop drawing base on concept design/ drawing for any type of

fabrication work and get approved. Contractor shall prepare mock-up/ prototype (as

suggested) as per approved shop drawing for approval. Work shall be carried out as per

approved shop drawing, approved mock-up/ prototype and as suggested by Engineer in

3. Rate shall be for all floor, all level all height.

4. The rate shall include cost of all types of fasteners (ETA approved) to be used for

5. Structural stability shall be responsibility of contractor for all kind of metal work.

6. All elements shall be factory fabricated and finished, only final finishing to be made on

site with all precautions.

7. Contractor shall coordinate all services work (cut-outs and provisions) in metal work.

All cut-out and services provisions shall be finished at factory/ work shop.

8. contractor shall provide PVC/ nylon seprator, where two different metals connect to

avoid galvanic reactions.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Structural steel work - Fabrication works - with paint

Providing, fabricating, assembling, hoisting, erecting and fixing in position structural steel

work at all heights/ all levels/ all shapes & sizes with all leads & lifts using any type of MS

section like rolled steel sections, hollow sections, plates, chequered plates, bar, sheet,

rod, threaded bolt, railing etc. all confirming to latest relevant IS codes for the metal

elements i.e. window grill, transom bar, bright bar in wooden door - window frame, railings,

gates, grills, bracings, foundation plate & bolt, support at truss system, truss, purlin, rafter

,cleat, platforms, brackets, fencing pole, signage pole, service elements, Jali, clamp, logo

etc. including straightening, cutting, bending, embosing, bolting and welding, eatching (if Rupees One Hundred FiftyEight Paise

required) the members all as per structural drawings and as per detailed specifications FourtySeven Only

(for materials & workmanship) including profile cutting, smooth grinding, machining of

edges/ faces, necessary welding (electric arc welding) for required weld lengths and

sizes, machine drilling of holes for joining/ anchoring/bolting, necessary arrangements of

templates to keep the foundation bolts in position dry sanding, degreasing (wet cleaning)

& preparation of rust-free surface manually or mechanically, metal putty to make the

surface even and smooth, necessary scaffolding/ staging, anchor fasteners,extra for

bending elements for fixing etc complete.

Contractor shop/ fabrication prepare shop drawing and get approved. The fabrication

work shall start only after approval of the fabrication drawings. Fabrication shall be in a

perfect Architectural workmanship manner and as provided in Section V & VI of IS 800 &

IS 7215. Contractor shall responsible against stability, safety etc all complete

The rate shall include for applying (on all surfaces of MS member) two or more coats PU

paint (DFT min 40 micron per coat) of approved make and shade over two coat (DFT min

50 micron per coat) of anti corrosive epoxy base primer for PU paint/suitable primer for

hammer finish paint, as per manufacturer's specification, anchor fastener etc all

SS perforated sheet

Providing and fixing SS 304 grade 3mm thick perforated sheet for any type metal

elements as per design and drawing. Perforation shall be any size and shape and made Rupees Nine Thousand One Hundred

with CNC machine only. Four Paise Eighty Only

Sheet shall be fixed with SS 316 grade screws on metal structure. Outer most dimension

of SS perforated sheet shall be measured for payment.

Metal plank Ceiling

Providing and fixing non perforated hook on, external category demountable aluminium

plank false ceiling system of approved make of approved RAL finish colour consisting of

panel 300 mm wide x 30 mm deep x min 0.7 mm thick with bevelled edges having panel

length up to 3 mtrs aluminium panel (without deflection) with aluminium alloy

AA3105/3005, with interior grade powder coated 80 micron coating thickness or coil

coated on a continuous paint line, double baked and roll formed for higher strength and

good roll forming characteristics.

System substructure consisting of form punched angles as a lateral grid which is

suspended pressure-rigid from the bare ceiling with M6 threaded rods using approved Rupees Four Thousand Nine Hundred

55 dowel plugs. The angles are to be connected together at the ends by means of Sqm 154.00 ₹ 4,985.77 ₹

EightyFive Paise SeventySeven Only

longitudinal connectors. The spacing of the grid angles is according to the requirements

of DIN 18168 and DIN EN 13964 as well as the loads of the system and are to be

determined and checked by the contractor. On the grid angles, Z-shaped carrier profiles

are attached as longitudinal profile with M6 bolts [secured against loosening. The

longitudinal connection of the Z-shaped carrier profiles are made by means of profile

connectors. The spacing of the Z-shaped carries profiles is to be matched exactly to the

spacing of the hook-in sides of the metal panels so that panels rest tension-free in the

system. Care is to be taken to ensure horizontal and flush alignment.

Total Carried Over to Summary ₹

EXTERNAL DEVELOPMENT WORK

1) Stones shall be free from cracks, lines, stains, white spots of efflorescence and even

in shade for all kind of stone work.

2) Stones shall be selected and sorted for uniform colour, figure and thickness and

approved by Engineer in charge prior to procurement.

3) Stone shall be from same lot and/ or source (stone quarry) for same kind of work and

as approved by Engineer in charge.

4) Contractor shall apply Stone Impregnation primer/ sealer coat on back side and all

edges (after cutting and finishing of the stone as per size) of stones of approved make.

Stone Impregnation primer/ sealer coat shall be of water based with pH value 7 to 10 in

minimum two coat as per manufacturer's specification and as directed by Engineer in

charge. No extra shall be paid for the same.

5) Contractor shall prepare and submit shop drawing for all kind of stone work with sub

base/ framing work/ fixing arrangement/ joinery with all required fasteners and get

approval from Engineer in charge.

6) Mock up/ sample shall be prepared as per approved shop drawing and get approved by

Engineer in charge before execution of work.

7) All adhesives and sealants shall be with low VOC and lead free with acceptable VOC

content as per Green Building requirements.

8) Stone work shall be carried out for all floor, all level, all height, all places including

loading, unloading, stacking, transporting, hoisting, erecting by any means (mechanical or

9) All type of stones shall be cut to size with help of with water jet cutting/ laser cut/ CNC

machine according to the design and shape for best workmanship as per shop drawing.

10) Granite shall be mirror polished/ flame finished/ sand blasted/ river wash finish or

other as per specified.

11) All type of stone/ stone elements shall be factory cut and factory finished. Finish on

any stone shall be as per satisfaction of Engineer in charge. If required, final finish/ touch-

up shall be executed at site as per direction of Engineer in charge.

12) Structural stability of solid stone work, precast element shall be responsibility of

13) Contractor shall make necessary provision for any services cut-out/ other required

provision, co-ordinate with all services work and making good etc complete.

14) All visible surfaces of stone shall be same finished.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Box cutting for making a base for road work, pavement works walkway, etc in all kind of

soil, or any other material to give proper slop and camber by any means including getting Rupees One Hundred Nine Paise

out the excavated material, and stacking material, dressing of the sides, and disposal of TwentyFive Only

excavated earth for all lead within site area/ plot boundary, etc complete as directed by

engineer-in-charge.

Sub grade preparation and consolidation

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne

capacity after excavating earth to an required depth, dressing to camber and Rupees One Hundred Ten Paise

consolidating with road roller including making good the undulations etc. and re-rolling the SixtyFive Only

sub grade and disposal of surplus earth with lead up to 50 metres.

Construction of granular sub-base (GSB) by providing close graded Material conforming

to required grade with required size of aggregate (respective as per grade) having CBR

Value as per respective grade specifications/crusher run, mixing in a mechanical mix/mix

Rupees One Thousand Five Hundred

58 in place method plant at OMC, carriage of mixed material by tipper to work site, for all Cum 7390.30 ₹ 1,570.15 ₹

Seventy Paise Fifteen Only

leads & lifts, spreading in uniform layers of specified thickness with motor grader on

prepared surface and compacting with vibratory power roller to achieve the desired

density, complete as per MoRTH clause 401 and as directed by Engineer in charge.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm

to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material

Rupees One Thousand Seven Hundred

59 with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site for Cum 7104.90 ₹ 1,768.57 ₹

SixtyEight Paise FiftySeven Only

all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base

course on well prepared surface and compacting with vibratory roller to achieve the

desired density, complete as per specifications and directions of Engineer-in-charge.

Providing and applying primer coat with cationic bitumen emulsion SS1 grade conforming

to ASTM GRADE on prepared surface of wet mix macadam including clearing of

GSB/Wet mix macadam surface with air compressor to remove all loose material other

60 foreign material. The primer shall be sprayed uniformly at the rate of 0.70-1.0 kg/sqm. It Sqm 20141.00 ₹ 30.51 Rupees Thirty Paise FiftyOne Only ₹

shall be applied by a self-propelled or towed bitumen pressure sprayer, equipped for

spraying the material uniformly at a specified rate. No dilution or heating at site of SS1

bitumen emulsion shall be permitted.

Dense Graded Bituminous Macadam (Providing, Carting and laying of dense bituminous

macadam with batch type HMP producing an average output of 75 tonnes per hour using

crushed aggregates of specified grading, premixed with bituminous binder VG-40 grade

@ min 4.5% by weight of total mix, transporting the hot mix to work site, laying with a self- Rupees Four Thousand Two Hundred

propelled paving machine equipped with an electronic sensing device to the required Two Paise FourtySix Only

grade, level and alignment, rolling with 8-10 tonne static weight or vibratory roller or with a

pneumatic tyre roller of 12 to 15 tonne weight to achieve the desired compaction as per

approved design mix .for Grading- II. (26.5 mm nominal size) As per Morth 5th Revision..

Providing & applying Tack coat with VG-30 Grade bitumen using bitumen pressure

62 distributor at the rate of 0.20-0.30 kg/sqm on the existing bituminous surface cleaned with Sqm 41957.80 ₹ 13.34 Rupees Thirteen Paise ThirtyFour Only ₹

Air Compressor etc complete.

Bituminous Concrete

Bituminous Concrete (Providing, Carting and laying of bituminous concrete with batch

type hot mix plant producing an average output of 75 tonnes per hour using crushed

aggregates of specified grading, premixed with bituminous binder VG-40 @ min. 5.4 % of

mix, transporting the hot mix to work site, laying with a self-propelled paving machine Rupees Four Thousand Six Hundred

equipped with an electronic sensing device to the required grade, level and alignment, NinetyFive Paise ThirtyFour Only

rolling with 8-10 tonne static weight or vibratory roller or with a pneumatic tyre roller of

to 15 tonne weight to achieve the desired compaction as per approved design mix. for

Grading-II (13.2 mm nominal size) As per Morth 5th Revision.

Asphalt painting on B.T. surface

Providing and laying Asphalt painting on B.T. surface with bitumen grade 60/70 (VG-30) at

the rate of 5 kg/ 10Sqm by mechanical sprayer and spreading the stone dust on prepared

Rupees TwentyFive Paise SeventyOne

64 surface at the rate of 0.03 cum/ 10Sqm and rolling with smooth wheeled and pneumatic Sqm 41957.80 ₹ 25.71 ₹

roller and brushing etc complete as per relevant MoRTH clause and as directed by

Engineer in charge.

CC Pavement - M

Providing and laying cement concrete pavement of mix M-30 with ready mixed concrete

from batching plant. The ready mixed concrete shall be laid and finished with vacuum

dewatering process and Power floater treatment in roads, pavements, platform, floors etc

well compacted, mechanically vibrated with screed vibrator, finished to required levels,

floated with neat cement and power trowelled to get desired smooth finish/ broom finish

as per design, over a levelling course, including casted in panel, MS channel or box

shuttering, curing etc as directed by Engineer. The Contraction joints to be formed at

every 5m distance by grooving with mechanical saw within 48 hrs. Groove/ sawed joints/ Rupees Seven Thousand Four Hundred

65 longitudinal joints shall be made of 6mm width and 40 mm depth min (1/3 rd depth of the Cum 4645.70 ₹ 7,437.90 ₹

ThirtySeven Paise Ninety Only

pavement) as shown in the drawing. LDPE sheet (min 125 gsm) shall be laid below

pavement. The rate shall be inclusive of labour, making the grooves, filing groves with

approved sealant and backer rod, provision of expansion joint, LDPE sheet and

machinery cost etc complete and as directed by Engineer in charge. Reinforcement if

required shall be paid in relevant tender item. Mock up for concrete pavement work (for

brooming pattern and joints as per drawing) shall be prepared by contractor and got

approved from architects in all respect prior to mass execution works. Architect reserves

right to reject part or all work of sub standard or not in confirmation to sample approved

as per mock up.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Kotastone - 40mm thick - For Coping/seating on bench etc.

Providing & laying 40 mm thick machine-cut Kota stone of any finish (i.e. polished finish

etc), any shade (uniform), any size and any shape, for coping, seating on bench in

required design and patterns as per the drawings, laid over up to 40 mm thick cement

mortar 1:4 (1 cement : 4 sand) bedding, and jointed with grey cement slurry mixed with

pigment to match the shade including making groove or kota fixing on bench with suitable

adhesives per manufacturer specification as per drawing, curing, exposed edge of stone

Rupees Two Thousand Two Hundred

66 shall be with rubbing and polishing and champharing/ making pencil corner if required, Sqm 83.60 ₹ 2,249.98 ₹

FourtyNine Paise NinetyEight Only

rounded corner treatment in even thickness and finished same as slab finish as per

drawing and as approved and directed by Engineer in charge, Kotastone shall be used in

single possible length/as per drawing for coping / seating on bench. Rate shall be

inclusive of Kotastone (as per approved sample), fixed with cement mortar bedding,

cement slurry, matching pigment,edge treatment, all labour etc complete.

The actual laid area of the Kota stone shall be measured for payment without considering

Kotastone - 40mm thick - For Coping/seating on bench etc.

Providing & laying 40 mm thick machine-cut Kota stone of Textured finish (i.e. i.e. river

wash, leather finish, linen finish, lappato finish, canvas finish or similar finish etc), any

size and any shape, for coping, seating on bench in required design and patterns as per

the drawings, laid over up to 40 mm thick cement mortar 1:4 (1 cement : 4 sand) bedding,

and jointed with grey cement slurry mixed with pigment to match the shade including

making groove or kota fixing on bench with suitable adhesives per manufacturer

specification as per drawing, curing, exposed edge of stone shall be with rubbing and Rupees Two Thousand Four Hundred

polishing and champharing/ making pencil corner if required, rounded corner treatment in SixtySeven Paise SixtyNine Only

even thickness and finished same as slab finish as per drawing and as approved and

directed by Engineer in charge, Kotastone shall be used in single possible length/as per

drawing for coping / seating on bench. Rate shall be inclusive of Kotastone (as per

approved sample), fixed with cement mortar bedding, cement slurry, matching

pigment,edge treatment, all labour etc complete.

The actual laid area of the Kota stone shall be measured for payment without considering

Precast Cement Concrete Paver Block - 60mm thick, M-35 Grade

Providing and laying factory-made chamfered edge shot blasted/sand blasted finished,

non-interlocking type, square/ rectangle shape paver blocks of approved make, any

sizes, any shade, any pattern, any color having 60 mm thickness and minimum M-35

grade, machine made, factory finished for footpath, parking areas, service lanes and

other similar areas as mentioned in the drawing Including providing and laying 50 to

mm thick average bedding layer of coarse sand below paver block as per required

grading and specification. The laid paver block shall be mechanically compacted. The Rupees One Thousand Four Hundred

work of the paving blocks shall be executed in line and level. The paver block shall be cut EightyOne Paise SixtyTwo Only

by mechanical means only, if required. Paver blocks shall be compacted and shall be re-

laid if necessary. The actual laid area shall be measured for payment without any

wastage. The Sample and mock-up shall be approved before execution. damaged block

shall not be used in laying. Sample and mock shall not be payable if rejected.

Precast Cement Concrete Paver Block - 80mm thick, M-40 Grade

Providing and laying factory-made chamfered edge shot blasted/sand blasted finished,

non-interlocking type, square/ rectangle shape paver blocks of approved make, any

sizes, any shade, any pattern, any color having 80 mm thickness and minimum M-40

grade, machine made, factory finished for footpath, parking areas, service lanes and

other similar areas as mentioned in the drawing Including providing and laying 50 to

mm thick average bedding layer of coarse sand below paver block as per required Rupees One Thousand Six Hundred

69 grading and specification. The laid paver block shall be mechanically compacted. The Sqm 4196.50 ₹ 1,666.30 ₹

SixtySix Paise Thirty Only

work of the paving blocks shall be executed in line and level. The paver block shall be cut

by mechanical means only, if required. Paver blocks shall be compacted and shall be re-

laid if necessary. The actual laid area shall be measured for payment without any

wastage. The Sample and mock-up shall be approved before execution. damaged block

shall not be used in laying. Sample and mock shall not be payable if rejected.

Pre-cast concrete kerb

Providing & fixing M25 grade of concrete factory-made precast exposed/ fair finish kerb

stones of approved make and as per sample approved of any sizes, any shape. Kerb

shall have chamfered type/ pencil corner edges. Kerbs shall be fixed on the base PCC

with cement mortar 1:2 including flush pointing in CM (1:2) for all joints of the kerbstones,

curing, etc. complete. The rate shall also include erecting and fixing in position all

varieties/ shapes of kerbs (i.e. radius kerbs, corner kerb, quadrant kerbs, drain out kerb,

flat kerb, parking edge kerb, ramp kerb etc) as per drawing. Precast kerb shall be

protected with good quality plastic sheet for protection against bituminous/ concrete work. Rupees Seventeen Thousand Three

70 The rate shall include the joining, curing, finishing, protection etc complete as directed by Cum 1137.70 ₹ 17,384.23 Hundred EightyFour Paise TwentyThree ₹

the engineer in charge. Actual installed kerb volume shall be measured in payment. Only

Sample and Mock-up shall be carried out as suggested by the Architect and as directed

by the Engineer in charge. The loose sample of kerb and laid mockup shall be approved

by the Engineer-in-charge before mass execution. Architect reserves right to reject part

or all work of sub standard or not in confirmation to approved sample as per mock up.

Sample and mock shall not be payable if rejected. The actual laid area shall be measured

for payment without any wastage.

Base PCC, excavation (if required) and other required civil work shall be paid in relevant

items. damaged block shall not be used in laying.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Precast elements for misc. items

Providing, hoisting and fixing fair finish Precast Concrete of M 25 grade in light pole

cover, base of dustbin, saucer drain, coping etc including cost of required centring and

shuttering, reinfocement TMT bar (if required) and arranging precast members in position

with required joining arrangement, MS stud or anchor/bolting with grouting etc complete all

material, loading, transportation, unloading, tools, tackles, scaffolding, machinery,

equipment, for all level, for all height/ depth, and as per direction of Engineer-in-Charge.

Contractor shall provide loosed sample of each elements at location suggested by

Rupees Fourteen Thousand Six

engineer incharge for review and approval from Engineer in charge before mass

71 cum 221.20 ₹ 14,675.66 Hundred SeventyFive Paise SixtySix ₹

preduction/ execution. Architect reserves right to reject part or all work of sub standard or

not in confirmation to approved sample as per mock up. Contractor shall prepare

coordinated shop drawing for all elements with all members including all services/other

allied civil works provision and get approval from Architect and engineer in charge.

If required, excavation and base preparation work shall be paid in relavent tender items.

Actual volume of installed precast elements shall be measured for payment. Sample and

mock shall not be payble if rejected or casted in other location (not in scope of work

MS Cylindrical Bollard/ delineators

Providing and placing in position MS Bollard / delineators of any size, any shape, in

required thickness as per drawing (factory made). Bollard/delineators shall be made of

MS section with base plate and bolts. Bollard/delineators shall be finished with two or

more coats of PU paint (min 60 DFT) of approved make and shade over two coat of anti-

corrosive epoxy base primer, as per manufacturer's specification. Retro reflective strips Rupees One Hundred SixtyTwo Paise

of approved make shall be fixed on bollard/delineators after painting work as per drawing. FourtySix Only

Bollard /delineators shall be fixed on concrete base with required anchor fastener, bolts,

other accessories etc with required civil work.

Rate shall be inclusive of all material (MS work, PU paint, reflective tape, fastener,

accessories etc) but excluding the cost of required civil work (i.e. excavation, filling,

concrete base etc) as suggested by Engineer in charge.

Hume pipe for Tree Pit

Providing and fixing RCC NP3 class hume pipe of 750mm internal dia. and required

length in single piece or two circular half for tree pit shall be placed in excavated pit as

per drawing and as directed by engineer in charge. Rate shall be inclusive of material,

Rupees Three Thousand One Hundred

73 labour for cutting,excavation, placing in position etc complete. After Execution of Tree pit, Rmt 127.20 ₹ 3,149.34 ₹

FourtyNine Paise ThirtyFour Only

If it is filled with debries or C&D waste due to any reason, It shall be removed without any

extra cost before filling garden soil in tree pit. Tree pit shall be filled with garden soil only

however garden soil filling shall be paid in relevant tender item.

FRP Tree pit cover

Providing and fixing solid tree pit cover around the tree pit, made of FRP of size having

approximate 1200mm outer dia and 750mm inner dia and 40mm thickness with fixing

Rupees Twenty Thousand Five Hundred

74 arrangement with base structure of approved make and shade, as per design intent No. 330.00 ₹ 20,541.23 ₹

FourtyOne Paise TwentyThree Only

including fixing as per drawing etc. complete as directed by Engineer in charge. Sample

and mock-up shall be approved by architect before execution.

FRP Recessed Manhole cover

Providing and Fixing heavy duty double seal FRP recessed Manhole cover with frame of

40MT capacity, in matching shade of surrounding pavement and design according to EN -

124:1994 of approved make and shade having clear opening size of 600mm x 600mm

and recesse depth upto 80mm with client's logo etc. complete for all lead and lift . Cover Rupees TwentySix Thousand Two

75 shall be with 4 number lifting key with proper lifting arrangement. Frame shall be No. 605.00 ₹ 26,274.85 Hundred SeventyFour Paise EightyFive ₹

embedded in concrete of required grade and top level of frame shall be flush with Only

road/surrounding level as per drawing and as directed by Engineer in charge. Rate shall

be inclusive of cover frame and concrete work for fixing the frame. Sample and mock-up

shall be approved by architect before execution.

Precast Perforated Drain Cover

Providing and placing in position factory made fair finish Precast RCC frame &

perforated cover on drains of size 600mm x 600mm x 100mm of approved make of

Rupees Two Thousand Four Hundred

76 footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost No. 979.20 ₹ 2,463.55 ₹

SixtyThree Paise FiftyFive Only

of moulding, reinfocement TMT bar, rendering, etc i.e. cost of transportation for all leads

& lift, handling at site etc. all complete as per direction of Engineer-in-Charge. Sample and

mockup shall be approved by Architect before execution.

Providing and laying cement concrete tactile flag stone (for vision impaired persons as

per standards) of any sizes, any shade, any pattern, any color having 60mm thick as per

drawing of approved make having water absorption not over 6% and conforming to IS:

13801:1993, of approved make, pattern and shade (with UV light resistant colours from

Lanxess only) in outdoor floors such as footpath, plaza, multi modals location etc., laid on Rupees One Thousand Five Hundred

40mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & Fifty Paise EightySix Only

patterns including grouting the joints with white cement mixed with matching pigments,

curing, finishing etc. complete as per direction of Engineer-in-Charge. Sample shall be

approved by Engineer in charge.

Providing and fixing FRC Heavy Duty (HD35) Man hole cover with frame 600mm x

600mm or 600mm dia clear opening with 100 x 2mm MS flat all-round, 16mm ø plain

round bar for lifting the cover & shall be fitted with plastic cups. On the upper periphery of

frame 25 x 3 mm wide MS flat with hot dip galvanizing shall be well embed in concrete to Rupees Four Thousand FiftyThree

protect the edges of frame. Frame shall be fixed with cement mortar or cement concrete Paise Thirteen Only

as per site condition, as per drawing and as directed by Engineer in charge. Sample shall

be approved before execution.

Providing and fixing in position metal dustbin (readymade factory product) for external

use, having capacity approximate (40+40) Litre (dry + wet) dustbin set of approved make

and as per approved sample. Dustbin shall be separate for Dry and wet waste with logo of

client. Both bin of dustbin shall have swing type arrangement for functioning of dustbin. Rupees TwentySeven Thousand Nine

sample shall be approved by Architect and Engineer in charge before mass production. Hundred Twenty Paise Fourteen Only

Architect reserves right to reject part or all work of sub standard or not in confirmation to

approved sample as per mock up. Sample and mock shall not be payble if rejected or

casted in other location (not in scope of work area).

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Precast Planter

Providing, hoisting, and arranging in position precast exposed/ fair finish, factory

made concrete planter of approximate size 800mm x 600mm x 580mm as per design

intent, of approved make, made of minimum M-25 grade reinforced cement concrete.

The rate shall also include for erecting and fixing the planter in position as per drawing,

finishing, including reinfocement TMT bar (if required) etc complete as directed by

Rupees Fourteen Thousand Three

Engineer in charge.

80 No. 783.40 ₹ 14,389.42 Hundred EightyNine Paise FourtyTwo ₹

Contractor shall submit methodology for erection of planter and get approved from

Engineer in charge. Installed planter shall not have any damages.

Sample shall be approved by Architect and Engineer in charge before mass production.

Architect reserves right to reject part or all work of sub standard or not in confirmation to

approved sample as per mock up. Sample and mock shall not be payble if rejected or

casted in other location (not in scope of work area).

Providing, hoisting, stacking and arranging in position Precast Bench made of minimum

M-25 grade reinforced cement concrete of approximate size 1500mm x 450mm x

380mm as per drawing, Contractor shall submit methodology for erection of precast

bench and get approved from Engineer in charge. Installed precast bench shall not have

any damages. The rate shall also include for erecting and fixing the bench in position as Rupees Fifteen Thousand Four

81 per drawing, finishing, including TMT reinfocement bar (if required) etc complete as No. 119.40 ₹ 15,498.05 ₹

Hundred NinetyEight Paise Five Only

directed by Engineer in charge.

Sample shall be approved by Architect and Engineer in charge before mass production.

Architect reserves right to reject part or all work of sub standard or not in confirmation to

approved sample as per mock up. Sample and mock shall not be payble if rejected or

casted in other location (not in scope of work area).

Pre cast Cylindrical Bollard

Providing, hoisting, and arranging in position exposed fair finish, factory made pre-cast

bollard of approximately size 800mm high and 280mm Dia as per design intent, of

approved make, made of minimum M-30 grade reinforced cement concrete.

The rate shall also include for erecting and fixing the bollard in position as per drawing,

finishing, cost of excavation, base PCC M15 grade and finish good, reinfocement TMT

bar (if required), rendering (if required), transportation, loading and unloading charges,

Rupees Three Thousand EightyThree

82 etc complete as directed by Engineer in charge. No. 563.80 ₹ 3,083.79 ₹

Paise SeventyNine Only

Contractor shall submit methodology for erection of bollard and get approved from

Engineer in charge.

Sample shall be approved by Architect and Engineer in charge before mass production.

Architect reserves right to reject part or all work of sub standard or not in confirmation to

approved sample as per mock up. Sample and mock shall not be payble if rejected or

casted in other location (not in scope of work area).

Providing and applying 2.5 mm thick road marking strips (retro reflective) or graphic/

letter/ arrows etc of specified shade/ colour using hot thermoplastic material by fully/ semi

automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads

dispenser, propane tank heater and profile shoe heater, driven by experienced operator Rupees Three Hundred SixtySeven

on concrete/ tar road surface including cost of material, labour, T&P, cleaning the road Paise SeventyThree Only

surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of

Engineer-in-charge and accordance with applicable specifications.

Supplying and fixing Cat Eye (Stimsonite) made out from Acrilo beautile sterine injuction

high compressed molding with reflector made of MMC (prismatic type of size 12cm x 6cm Rupees Three Hundred SeventyFive

x 2.5cm) with each unit for foxing. (High intensity grade) Paise SeventyTwo Only

Providing and erecting 2.00 metre high temporary barricading at site; made of precated

sheet/ MS panel with required MS fabrication work with required civil work. Suitable arrangement

shall be made to fix the barricading to avoid from overturning by suitable arrangement. Stability

of baricadding shall be responsibility of contractor. The work shall be executed as per drawing/

direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic

diversion such as traffic signals during construction at site for day and night, glow lamps,

reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The

barricading provided shall be retained in position at site continuously i/c shifting of barricading

from one location to another location as many times as required during the execution of the

entire work till its completion. Rupees One Thousand Two Hundred

Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments FiftyFour Paise SixtyThree Only

and shifting required to execute the job. The barricading shall not be removed without prior

approval of Engineerin- Charge. No extra rental will be given to the contractor in case of any

delays from his part for construction or due to any valid time limit extensions.

(Note :- Procured quantity of barricading shall be approved by the engineer in charge before

procurement/ fabrication of barricading and One time length of the procured barricading shall be

measured for payment. The rate include providing barricading from start of work till completion of

work i/c shifting. The barricading provided shall remain to be the property of the contractor on

completion of the work).

ACP sheet signage on any type of Pole :

Providing, Making and fixing 4 mm thick ACP sign of any shape and size and of approved

make to be cut on CNC router cutting and smoothen all corners and edges. Matter shall

be cut in 3M High intensity prismatic Reflective vinyl ASTM Type 4 and paste on it as per

design and detail and as per manufacturer's specifications. UV stabilized lamination

(exterior grade) shall be done on it. The ACP sheet shall be fixed with clamp and angle on

new or any type of Pole as per drawing. Content of sign shall be letters (in any language),

number, graphics/ maps, signs, arrows, etc. in any colour as per design, drawing and Rupees Nine Thousand Three Hundred

approved by Architect and Engineer. All side of box shall be covered with ACP sheet, but EightyFour Paise NinetyTwo Only

only one side elevation area shall be measured and paid in sqm. Cost of MS Pole, MS

framing and civil works shall be paid as per relevant tender items. The rate shall also

include cost of scaffolding, drilling, fabrication, finishing, adhesive material, back and

sides plain cap sheet, fixing charges, etc at all height and all lead. The contractor shall

submit the drawings with as per concept design and do the sampling and get it approved

before execution.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Design, fabricate, supply & installation and placing in position MS Prefabricated vending

unit approximate size as per concept design/ design intent, made of MS and PUF

panel(whereever required as per drawing) of approved shade, Finish & color. Prefab

booth shall be with

following specification. Vending unit shall be made of MS section with base plate and

bolts. Vending unit shall be finished with two or more coats of PU paint (min 60 DFT) of

approved make and shade over two coat of anti-corrosive epoxy base primer, as per

manufacturer's specification. Contractor shall prepare shop drawing

based on concept design/ drawing and get approval from Engineer-in-charge before

execution. Internal finish, fixture, points may vary as suggested by Engineer in charge.

Contractor shall provide loosed sample of each elements for review and approval from

Engineer in charge before mass preduction/ execution. Stability of each elements is

responsibility of contractor. Architect reserves right to reject part or all work of sub

standard or not in confirmation to approved sample as per mock up. Contractor shall

prepare coordinated shop drawing for all elements with all members including all services/

other allied civil works provision and get approval from Architect and engineer in charge.

Approved mock up works shall be measured for payment without any wastage However,

rejected Mock up shall not be measured for payment.

Vending unit shall be fixed on any type of surface with required type and size of tie rods,

anchor fastener, bolts, other accessories etc with required civil work.

Rate shall be inclusive of all material (MS work, PU paint, fastener, pivot, hinge, bracing,

Lock, aldrope, selves, platforms, light fixture and fan arrangement, anchor fastners,

including accessories etc), transportation for all lead and lift by any means etc but

excluding the cost of required civil work (i.e. excavation, filling, concrete base etc) as

suggested by Engineer in charge.

Rupees TwentyNine Thousand Three

Vending Unit - Type

87 No. 22.00 ₹ 29,327.88 Hundred TwentySeven Paise ₹

EightyEight Only

Providing and fixing of first quality white vitreous china Table Top Basin, type Wash

basin as per product detail,including filling gap between counter and wash basin with

approved sanitary grade material, cutting and making good the walls where required to Rupees Seven Thousand Two Hundred

the complete satisfaction of the Engineer in Charge including Oval Wash Basin; Rag ThirtySix Paise SixtyFive Only

Bolts for Wash Basins, Bottle Trap, Waste Coupling, Prismatic Pillar Cock .Size 410 x

Providing and fixing white vitreous china flat back urinal of approx. size 345x320x610 mm

having water inlet and outlet from back side, including fixing to wall with suitable brackets Rupees Fourteen Thousand FiftyFour

all as per manufacturers specification and direction of Engineer-in-charge including Urinal Paise Fifteen Only

and Urinal Flush. as directed by EIC.

Providing and fixing 18 mm.thick of approved quality of Granite urinal partition in single

piece of size 0.62 x 1.20 mt. in cement mortar 1:1 (1 cement : 1 coarse sand) and Rupees Two Thousand Two Hundred

finishing with white cement including polishing on bothsides,finishing edges with round SixtyFour Paise FourtyTwo Only

shape etc. complete. Rate includes for all lead & lift & as per directed by EIC.

Providing and fixing white vitreous china Wall Hung water closet (European type) of size

370X510X360 mm of approved shape (Jaquar or Equivalent ) including providing and

fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litter/ 6 litter,

Rupees Twenty Thousand Three

91 includingPP Soft close Seat cover, Hinges, Fixing Accessories,Accessories Set, and Nos 7.00 ₹ 20,355.54 ₹

Hundred FiftyFive Paise FiftyFour Only

Cistern fittings, with specials of standard make and mosquito proof coupling of approved

design complete,cutting and making good the floors wherever required including Jet Spray

as directed by EIC.

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm

Rupees Nine Hundred EightyTwo Paise

92 (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) Nos 3.00 ₹ 982.14 ₹

(A) Vitreous China.(I) Long pattern = White colour

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali

Rupees Five Hundred NinetyNine Paise

93 of the following nominal diameter of self cleansing design with C.I scread down or hinged Nos 11.00 ₹ 599.64 ₹

grating including the cost of cutting and making good the walls.

Providing & Fixing health faucet with 8 mm dia 1 mtr long flexible tube and wall hook as per Rupees Nine Hundred SixtyNine Paise

eic instruction. Ten Only

Providing and fixing chromium plated brass half turn flush cock of approved quality Rupees Nine Hundred SixtyNine Paise

including fixing in pipe line etc. complete.(ii) 25mm dia. Ten Only

Rupees Two Hundred SixtyFive Paise

96 PVC SWR pipes IS 13592 for Drain - 110 mmdia Rmt 110.00 ₹ 265.34 ₹

ThirtyFour Only

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water

Rupees One Thousand Two Hundred

97 tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Nos 11.00 ₹ 1,292.20 ₹

NinetyTwo Paise Twenty Only

Square mouth traps. (A) 100mm x 100mm size P type.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe Rupees Two Thousand Nine Hundred

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) ThirtyTwo Paise NinetyThree Only

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i)

Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

Providing and fixing 6 mm thick mirror including machine polishing glass all over and fixed Rupees Two Hundred ThirtyThree

with S.S. studs etc complete with all required fittings & Fixtures . Paise SixtyEight Only

Providing & fixing Handicap toilet set (SKU: S1013200) with European Closet & wash

basin & all handicap requirement with dual flush tank, seat & lead (heavy duty) including

C.I. Brackets, C.P. brass hinges, M.S. / C.I. painted brackets, Waste Coupling, 32mm

size bottle trap etc. all Internal fittings complete with grab rails etc. rubber buffers, C.P

nuts, bolts etc making holes in walls & floors, & finishing for ready to use.The rate

includes all necessary connection charges as per product detail to the satisfaction of Rupees FiftyEight Thousand Two

engr. incharge where required & the final handing over etc. complete as per Hundred SeventyNine Paise Two Only

specifications, drawings and as directed by the Engineer-in-charge. (Make: Cera CRUSE

SET - EWC 710 x 370 x 770 mm, Cat. No. S1013200, B1520118 Soft close seat cover,

S2040159 CRANE Wall hung wash basin 665 x 545 x 190 mm, F9030453 Single lever

clinical faucet, B2210106 Wall mounted grab bar 600 mm long 2nos, 2210108 Wall

mounted hinged hand rail 750 x 100 )

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to

Rupees One Hundred Twenty Paise

101 give an required shape even shade after thoroughly brushing the surface to remove all Smt 105.60 ₹ 120.27 ₹

TwentySeven Only

dirt, and remains of loose powdered materials.etc complete

Providing and fixing 35 mm thick shutters for Doors, windows and clearstory windows Rupees Three Thousand Seven

102 including blackenamelled M.S. butt hinges with necessary screws. (A) Indian teak wood. Smt 8.80 ₹ 3,773.85 Hundred SeventyThree Paise ₹

(i) Fully Panelled. EightyFive Only

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of

size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of

Rupees One Thousand Seven Hundred

103 horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of Sqm 6.60 ₹ 1,713.70 ₹

Thirteen Paise Seventy Only

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc complete

Applying two coats of acrylic lapy (putty) & two coats of primer of approved brand and

104 manufacture on new wall surface to give an even shade including thoroughly brushing the Smt 158.40 ₹ 40.60 Rupees Fourty Paise Sixty Only ₹

surface free from mortar dropping and other foreign matter and sand papered smooth.

Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 including Rupees One Thousand Eight Hundred

neat cement finishing, watering etc. complete.For all floor EightyNine Paise NinetyTwo Only

Providing and fixing FRP frame size 100 x 50 mm and 28 mm thick FRP shutter with

depressed panel SHUTTER having extra reinforcement on sides and edges and in GEL

coat finish. The core of shutter is to be filled up with injected fiber extinguishing grade

Rupees Two Thousand Three Hundred

polyurethane foam done in situ along with embedded wooden pieces for stiffening and

106 Smt 11.00 ₹ 2,377.77 SeventySeven Paise SeventySeven ₹

also for taking hinges and fixtures. The whole FRP frame and shutter is to be water proof,

weatherproof, termite proof and resistance to mild acid / Alkali resistance including S.S.

hinges with necessary screws and aluminum fixtures and fastening.Products should have

3 years performance gyarantee and company have ISO9001-2000 certificate.

Total Carried Over to Summary ₹

DISMANTLING AND DEMOLISHING

Dismantling of existing PCC work of any grade in any type of elements, including tools,

plants and scaffolding wherever necessary, sorting the dismantled material, disposal of

Rupees Eight Hundred TwentyOne

107 unserviceable material at non objectional place and stacking the serviceable material with Cum 550.00 ₹ 821.17 ₹

Paise Seventeen Only

all lifts and leads as directed by engineer in charge.

Dismantling of existing RCC work of any grade in any type of elements by mechanical

or manual means as suggested by Engineer in charge, including cutting reinforcement,

including tools, plants and scaffolding wherever necessary, sorting the dismantled Rupees One Thousand Two Hundred

material, disposal of unserviceable material at non objectional place and stacking the SixtyNine Paise SeventySix Only

serviceable material with all lifts and leads as directed by engineer in charge.

Dismantling of existing any type of masonry work in type of structure in any

thickness, with or without plastered or any type of wall lining work, in any type of mortar

including tools, plants and scaffolding wherever necessary, sorting the dismantled Rupees Seven Hundred SixtyTwo Paise

material, disposal of unserviceable material at non objectional place and stacking the Thirty Only

serviceable material with all lifts and leads as directed by engineer in charge.

Dismantling of existing any type of Steel Structures/ Metal works for all level

including dismantling, cutting, dismembering all elements of structure by any means as

suggested by engineer in charge, earth work, base concrete and making good the

110 Kg. 2750.00 ₹ 3.85 Rupees Three Paise EightyFive Only ₹

disturbed ground, stacking useful materials and disposing off the unserviceable materials

at non objectional place with all lead and lift and as directed by Engineer in charge.

Removal of existing kerb stones of any type, any size, any thickness in required

depth including removing kerb with base PCC including excavation etc, disposal

unserviceable material with all lifts and up to any lead at non objectional place and

111 Rmt 550.00 ₹ 31.52 Rupees ThirtyOne Paise FiftyTwo Only ₹

stacking the serviceable material including loading, unloading for all lead and lift and as

directed by Engineer-in-charge.

Dismantling/ removing tiled, paved floors, stone floors with all required sub layers

including disposal unserviceable material with all lifts and up to any lead at non objectional

Rupees One Hundred Eleven Paise

112 place and stacking the serviceable material including loading, unloading for all lead and lift Sqm 1375.00 ₹ 111.45 ₹

FourtyFive Only

and as directed by Engineer-in-charge.

Dismantling/ removing any type of pipe lines of any dia up to any depth by any

means as suggested by Engineer in charge including excavation, removing of pipe, back

filling, watering, compaction, including tools, plants, all types of accessories and Rupees Two Hundred Nine Paise Two

scaffolding wherever necessary, disposal unserviceable material with all lifts and up to Only

any lead at non objectional place and stacking the serviceable material including loading,

unloading for all lead and lift and as directed by Engineer-in-charge.

Renovation & Raising of existing manhole for the height (up to clear height

500mm) at top including cost of excavation, removing of manhole frame and cover,

necessary civil work (i.e. concrete work, brick masonry work, plaster, reinforcement, Rupees Six Thousand Four Hundred

shuttering), curing, back filling, finishing good, etc. complete including disposal of debris Nineteen Paise FourtySix Only

for all lead and lift and as directed by engineer in charge. If required, CI steps shall be

provided in manhole (due to increase height) without any extra cost.

Transplantation of trees

Transplantation of trees with in a distance of all lead including excavation around existing

tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits

for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer

to it. Levelled and neatly dressed and disposal of surplus materials from old existing and

new sites to designated place. Each tree should be firmly secured to the stake so as to

prevent excessive movement, flooding with water, treatment of roots, rope and gunny

bags as per direction of the Engineer in charge. T&P and all required materials shall be

arranged by the contractor and nothing extra shall be paid on this account. Contractor

shall take prior approval before execution. Location of transplantation shall be as

instructed by Engineer in charge.

Rupees Ten Thousand Two Hundred

115 Girth of trees upto 150cm. No. 15.00 ₹ 10,273.37 ₹

SeventyThree Paise ThirtySeven Only

Rupees TwentyTwo Thousand Eight

116 Girth of trees beyond 150cm No. 20.00 ₹ 22,866.10 ₹

Hundred SixtySix Paise Ten Only

Total Carried Over to Summary ₹

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Providing and supplying lSI Standard R.C.C. pipes(of Sulphate Resisting Cement) in

standard lengths of following class and diameter suitable for either collar joints or rubber

ring joints including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Note : One rubber ring should be supplied with each full length socketed pipe, cost

included in rates below.

300 mm dia Rmt. Rupees One Thousand NinetySeven

Paise EightySeven Only

450 mm dia Rmt. Rupees Two Thousand Two Hundred

Paise SeventyNine Only

'Lowering, laying and jointing R. C. C. pipes of following diameters in proper position,

grade and alignment at all level as directed by Engineer-in-charge including conveyance

from stores to site of work, labour, giving hydraulic testing as per lSI code.

R.C.C. PIPES (At any Depth)

i)300 mm dia. Rmt. Rupees One Hundred Twenty Paise

ii)450 mm dia. Rmt. Rupees One Hundred SeventyTwo

Paise SeventyOne Only

Storm Water Network Works

'Providing and supplying lSI Standard R.C.C. pipes(of OPC) in standard lengths of

following class and diameter suitable for either collar joints or rubber ring joints including

all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc. complete. (IS - 458/

Rupees One Thousand Three Hundred

122 450 mm dia for curb intlet(NP3) Rmt. 120.00 ₹ 1,374.61 ₹

SeventyFour Paise SixtyOne Only

Rupees One Thousand Nine Hundred

SixtyFive Paise FourtySix Only

Rupees Three Thousand Six Hundred

ThirtySeven Paise One Only

'Lowering, laying and jointing R. C. C. pipes of following diameters in proper position,

grade and alignment at all level as directed by Engineer-in-charge including conveyance

from stores to site of work, labour, giving hydraulic testing as per lSI code.

R.C.C. PIPES (At any Depth)

450 mm dia. Rmt. Rupees One Hundred SeventyTwo

Paise SeventyOne Only

600 mm dia. Rmt. Rupees Two Hundred Thirty Paise

TwentyEight Only

900 mm dia. Rmt. Rupees TwentyTwo Thousand Eight

Hundred SixtySix Paise Ten Only

Total Carried Over to Summary ₹

HORTICULTURE & LANDSCAPING

General Notes for Horticulture work:

1.All plants shall be of the size specified in the Plant Schedule & Planting Palette at the

time of delivery to the site and shall be obtained from an approved source.

2.All plants shall be supplied as specified in tender documents and the Contractor is

expected to import stock if it is not available locally.

3.Consultant shall inspect and approve all imported and locally sourced plant material

at place of origin.

4.All plants shall be container grown, except for field grown palm species. Container

grown nursery stock shall be vigorous, healthy, and have a well established root

system spread throughout the growing medium container to maintain a firm ball when

the container is removed.

5.The Tender must be based, without exception, upon plants that are specified. If

plants are subsequently found to be unobtainable, alternatives may be submitted,

stating how they differ from the Specification. Such substitutions may not be

acceptable and submission of further alternatives may be required. Approval in writing

shall be obtained for any substitution.

Tree Plantation

Supplying, transporting, hoisting and planting well grown species for trees of required

Rupees Three Thousand ThirtyTwo

128 Tree Plantation - Category T1 (As per drawing) Each 193.00 ₹ 3,032.98 ₹

Paise NinetyEight Only

Rupees Two Thousand Eight Hundred

129 Tree Plantation - Category T2 (As per drawing) Each 135.50 ₹ 2,803.46 ₹

Three Paise FourtySix Only

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Shrub/ Hedge/ Ground cover/Grass plantation or other plants

Co-ordination with approved agency for planting of well grown shrub plants/ Hedge plants

and ground cover plants or other plants of specified species and height proposed planting

palleted in specification and planting in planter/ on land with good soil, manure, sludge,

pesticide & insecticide/ anti termite, fertilizer etc. and as per relevant tender item

specifications, including providing necessary water, electricity, other required services/

resources, removing debris, construction waste, etc. for all lead and lift as suggest by the

engineer in charge to successfully complete the execution work. Actual area of plantation

by agency shall be measured for payment.

Shrub Plantation - Category S1 (As per drawing) Rupees One Hundred SeventyEight

Paise TwentySeven Only

Shrub Plantation - Category S2 (As per drawing) Rupees One Hundred FourtyNine Paise

NinetyNine Only

Hedge Plantation - Category H (As per drawing) Rupees One Hundred FiftyEight Paise

SixtyThree Only

Ground cover Plantation - Category G1 (As per drawing) Rupees Four Hundred Five Paise

Co-ordination with approved agency for laying lawns and grasses established using

rooted plant on prepared ground with proper level and ramming with tools wooden

(Dhurmos) and watering and maintenance more till the grass establish properly, as per

direction of Engineer-in-charge. and as per relevant tender item specifications, including

providing necessary water, electricity, other required services/ resources, removing

debris, construction waste, etc. for all lead and lift as suggest by the engineer in charge to

successfully complete the execution work. Actual area of plantation by agency shall be

measured for payment.

Rupees TwentyTwo Paise FiftyEight

134 Grasses Category - GR1 (As per drawing) Sqm 1375.00 ₹ 22.58 ₹

Rupees TwentyFive Paise EightySix

135 Grasses Category - GR2 (As per drawing) Sqm 1100.00 ₹ 25.86 ₹

Total Carried Over to Summary ₹

Total Civil Amount ₹

Section Feeder Panels Type-A

Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control & Monitoring System

having a Smart Panel comprising of 3 Phase IoT Streetlight Smart 4G Timer with 16x2

LCD to display RSSI, relay status, RTC time & diagnostics., Controller works on 3-phase

& also on any available 1-Phase., Controller with 8-hour battery backup during external

power failure. External power failure alert immediately to cloud., 110-630 V AC @ 50-60

Hz – 3 phase operating range., Standby power consumption <3W., Smart 4G Timer with

RS232 port for DLMS Energy meter & RS485/UART/RS232 port for any external device

communication., Smart 4G Timer must be compatible with any make / brand of DLMS

(RS232) Energy Meter., DI: 5 Nos. (3 Contactor / Latch detection, 1 for SPD, 1 for Door

Sensor.)., DO: 3 Relays for Independent control each phase (R, Y, B) with 1 extra spare

relay., Highly Precise TCXO RTC with 10-year battery reserve., Automatically syncs with

internal, cellular, server & GPS clock; with logs stored in the CCMS Web Software.,

Smart 4G Timer with dual SIM functionality for connectivity backup., 4G M2M SIM 5-Year

communication included., Local configuration via WiFi / BLE for maintenance or during

force majeure., GPS chip inbuilt of Smart 4G Timer for auto location tracking &

astronomic schedule location., 50 programmable schedules., Astronomic scheduling with

monthly offsets., Smart 4G Timer has inbuilt timer stores schedules locally & also stores

schedule execution logs locally, syncs to cloud whenever connected to cloud., Auto-

scheduler overrides manual operations., Monitoring & alerts for MCB trips & SPD failure.,

Over/under voltage, current, overload, power factor & short circuit protections with alerts

via Dashboard, App, SMS, WhatsApp & Email., Contactor / Latch chattering protection &

alerts., Smart 4G Timer with neutral failure protection and alert., During earthing failure to

Panel, it must generate alerts on CCMS Dashboard for safety., Bulit-in Watchdog for anti-

jamming., Smart 4G Timer must send Regular "heartbeat" on software for CCMS status.,

Accelerometer for tamper & panel movement detection & alerts., Smart 4G Timer must

be tested from an NABL Lab for Surge Test @ 6 KV (IEC 61000-4-5), ESD Test @ 4 KV Rupees Two Lakh FiftyTwo Thousand

136 (IEC 61000-4-2), EFT @ 2 KV (IEC 61000-4-4), Conducted Emission @ 150 KHz-30 no 9.00 ₹ 2,52,230.33 Two Hundred Thirty Paise ThirtyThree ₹

MHz (CISPR11), Damp Heat Test (40 Deg C @ 95% RH) 2 cycles of 12+12 hours (IS: Only

9000 (Part 5/Sec.2):1981 latest) with all test passing criteria as “Temporary degradation

or loss of function or performance which is self-recoverable”., FOTA functionality

required for upgrades., Smart 4G Timer sends & stores online/offline data of controller &

load for lamp burn hours analysis.,

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

It stores & syncs connectivity logs for configuration of network connections & analytics.,

PANEL & SWITCHGEAR, The panel includes a Class 1 DLMS energy meter NABL

approved with 1-2 months of stored data of daily, hourly, monthly, load survey,

instantaneous, events, tamper data & with power events stored in meter memory for audit

purpose., Must monitor V, I, KWH, KVA, PF, KVAH, etc., Panel made with 2 mm CRCA

sheet with ground mountable stand complete with gland plate, waterproof glands, earthing

bolt., Panel to have transparent window to view DISCOM Energy Meter display., IP55,

weatherproof panel with RAL7035 powder-coated., Smart 4G Timer must be fitted on

removable terminal sockets for easy maintenance., Switchgear includes 3 Nos. 3 pole

Contactor / Latchs having minimum 100 A Load carrying capacity per phase, all other

switchgear & wires: 60 A load carrying capacity., Contactor / Latch rating such that spare

load like decorative lights can be operated., Spare 3 Pole Contactor / Latch (1 Nos.) also

available in panel for replacement during failure., 1 Nos. 4P MCB 10 kA for Incomer &

Nos. 1P MCBs 10 kA for Outgoing., Phase-Wise Bypass MCBs required., 4P RCCB

mA., 40kA, 335V smart SPD with feedback detection to send alert of SPD failure to

CCMS web software., Suitable 3 Phase RYBN 415 V AC isolation transformer for control

circuit stable feed., 1 Nos. Input & 3 Nos. Output RYBN TPN connectors for reliable &

safe termination., 4 Nos. DIN Rail Type R, Y, B indicators for each TPN connector.,

Door Panel. 1 in Front & 1 at Back., door sensor. Also, provide lock & key facility., High

quality ISI/BIS, FR Cables to be used., Double lugging to be avoided for potential fire

hazard., Minimum Dimensions of Panel: 1100 x 650 x 550 mm & stand height

dimensions: 700 mm.,

Panel must have clear 20% spare space for future upgradation., Panel must be equipped with

standard Indian type plug with 6 A 2 pole MCB & including light indicator.,Panel must contain min.

150 mm space at bottom (TPN connector end) for cable terminations., Automatic door sensor

based light (with protection MCB) for viewing/maintenance., Thermostat & Space heater (with

protection MCB) for cold weather conditions with automatic on/off controller., Panel must have

adequate provision to mount DISCOM Energy meter along with spare space around it., The

switchgear compartment must have cover on top with protective transparent 4 mm acrylic sheet,

with accessible window to operate switchgear components., Switch gear, energy meter & Smart

4G Timer must be warranted for 5 years., Panel mount outdoor antenna for GSM, GPS., Canopy

design for draining down water., CCMS SMART SOFTWARE, OAuth 2.0 APIs for sending data

to Government clouds/software, etc., CCMS Web dashboard with secure password & OTP

login., Hosted on trusted cloud, data security, antivirus & attack protection., HTTPS., AES256-bit

encryption., Vulnerability Assessment and Penetration Testing (VAPT) certificate for CCMS

Software., Streetlight management software for load status, live analytics & reports., Energy

meter data tables (kW, kWh, PF, I, V, etc.) available., Utility monthly bill reconciliation & Class

accuracy reports for billing, energy monitoring & auditing for streetlight load., Fault detection.,

Light fault 99% analysis on dashboard using energy monitoring., WhatsApp integration.,

Hierarchy-wise reporting & alerts., GIS mapping of live connected streetlight control panels,

poles & streetlights., MQTT protocol., Smartphone app with local configuration & navigation.,

Monitoring & reporting of lighting parameters., Facility for media attachments for site

photos/videos/work permits/checklists, etc. per Feeder Panel for remote verification., Asset

management module for streetlight infrastructure data., Complaint/service task management with

history & escalation must be available., Android & iOS App for dashboard analytics, graphs,

energy data, alerts., 5 Years CCMS Web Software & Cloud Server Hosting subscription

included., Customizable, user-friendly dashboard., Note : Provide Space for Supply co. meter as

per supply co. requirement

Sub Total 1.1 ..... ₹

32 A x 415 V plug & socket with interlocked switched socket, FP MCB and surface

mounting box IP 66 with DIN rail for 5 module equivalent to legrand make Cat no.56674 Rupees Eighteen Thousand Five

137 but without cost of wiring and piping. Scope also includes necessary foundation, cable no 8.00 ₹ 18,522.39 Hundred TwentyTwo Paise ThirtyNine ₹

entry pipes etc complete in all respect as per drawing. Only

Supplying, assembling, leveling, grouting, erecting, Testing, & Commissioning of

Totally insulated wall sockets with din rail 16 A 5 pin socket with 16A plug with 16A FP

MCB made out of environment friendly, recyclable polycarbonate thermoplastic, Degree Rupees Eight Thousand ThirtyEight

of Protection IP 67, in accordance with IEC 60309 ,self extinguishing glow wire tested at Paise FiftyNine Only

960 deg. cent equivalent to Hensel Walther make Cat. No. -AR119TS.

SITC of Water Tight Junction Box of Hensel make Cat. No. KG9003IN ( For Poles ) or

Rupees Three Thousand Four Hundred

139 equivalent. With necessary clamp for mounting of the J.B. ( All the cable / wire no 16.00 ₹ 3,476.42 ₹

SeventySix Paise FourtyTwo Only

connections to the JB shall be with the Water tight Glands only )

SITC of Water Tight Junction Box of Hensel make Cat. No. MI0301 with 10 sq. mm x

pole terminal of Hensel Cat. No. KLS10 with 3 nos of 6 sq. mm. x 5 pole terminal of

Hensel make KKL06 with 1 no of Mounting plate of Hensel cat. no. MIMP3 with 4 nos of Rupees Twelve Thousand Two Hundred

IP66 Hensel Glands with Din Rail for FP ELMCB With necessary clamp for mounting of Sixteen Paise NinetySix Only

the J.B. ( All the cable / wire connections to the JB shall be with the Water tight Glands

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and earth continuity of following type, Rupees Four Hundred FourtyNine

erected on PVC / Metallic box, single mounting base frame covered with textured/metallic Paise FourtyFive Only

front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

with medium class Rigid PVC pipe and accessories

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in / flushed on wall/ceiling, complete with

earth continuity and necessary connection with primary light with accessories erected on Rupees One Hundred ThirtyTwo Paise

Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open / ThirtyOne Only

concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

with medium class 25 MM DIA Rigid PVC pipe and accessories

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in following type of pipe to be erected concealed in /

flushed on wall / ceiling complete with 6A Tissino Type ISI marked accessories with earth

continuity erected on Metal/PVC//Wooden box covered with 3 mm thick Rupees Three Hundred SeventyFive

PC(Polycarbonate) / Acrylic sheet. with necessary Lamp holder/ceiling rose / Paise SeventyTwo Only

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan regulator with separately

Rupees Six Hundred ThirtyEight Paise

144 mounted and accessories with earth continuity of following type erected on PVC / no 5.00 ₹ 638.32 ₹

Metallic box, single mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic box, single mounting base frame covered with textured / metallic front plate Rupees Two Hundred FiftySeven Paise

modules erected on / in wall / ceiling with following type accessories FiftyFive Only

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of

to be erected concealed in / on surface of wall / ceiling complete with Modular type switch

Rupees Four Hundred SeventyFive

146 & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules no 10.00 ₹ 475.71 ₹

Paise SeventyOne Only

erected on / in wall / ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of

to be erected concealed in / on surface of wall / ceiling complete with Modular type switch

Rupees Seven Hundred Eleven Paise

147 & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules no 10.00 ₹ 711.04 ₹

erected on / in wall / ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

Wiring for the 250 volts single phase and neutral 16 amps switched socket outlet

with 4.0 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved

make with concealed or surface mounted 25 mm dia medium gauge PVC Conduit

Rupees Eight Hundred ThirtySeven

148 including providing and fixing of 16 amps 5 pin switch socket outlet of approved quality no 5.00 ₹ 837.29 ₹

Paise TwentyNine Only

color make & design in 2 mm thick GI box and earthing of fixtures and the outlet box

with 2.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire.

Sub Total 1.2 ..... ₹

MAINS : ( not for Point wiring )

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth continuity of Rupees Three Hundred FourtyThree

following size Paise Fourty Only

Supplying and Laying of 4 nos. of 6 sq mm Cu. FRLS flexible wires with 2 nos 2.5 sqmm

Cu. FRLS flexible wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth continuity of

Rupees One Hundred SeventyFour

150 following size mtr 100.00 ₹ 174.73 ₹

Paise SeventyThree Only

Supplying and Laying of 2 nos. of 6 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm

Cu. FRLS flexible wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth continuity of

Rupees One Hundred ThirtyNine Paise

151 following size mtr 200.00 ₹ 139.38 ₹

ThirtyEight Only

Supplying and Laying of 2 nos. of 4 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm

Cu. FRLS flexible wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth

Rupees NinetyNine Paise NinetyNine

152 continuity of following size mtr 500.00 ₹ 99.99 ₹

Supplying and Laying of 2 nos. of 2.5 sq mm Cu. FRLS flexible wires with 1 nos

sqmm Cu. FRLS flexible wires

Sub Total 1.3 ..... ₹

Distribution Board-TPN

Supply, Erecting, testing and commissioning of only TPN D.B. PPI type with space for

Rupees Ten Thousand Three Hundred

153 FPMCB as incoming and space for DPELMCB and 8 SPMCB as outgoing per phase (i.e. no 1.00 ₹ 10,383.81 ₹

EightyThree Paise EightyOne Only

8 way per phase D.B.)

Supply, Erecting, testing and commissioning of SPN D.B. with space for DPELMCB as Rupees Five Thousand Two Hundred

incoming and 4 SPMCB as outgoing per phase (i.e. 4 way D.B.) EightyEight Paise ThirtySix Only

SITC of the MCB's ( 10 KA ) Timers , & Contactors With the Dinrail Channel

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having

breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with Rupees Two Hundred Seventy Paise

ISI Mark SixtyEight Only

Miniature circuit breaker single pole suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with

Rupees One Hundred Twelve Paise

6 to 25 A SP MCB

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having

Rupees Two Hundred NinetyNine Paise

157 following capacity no 25.00 ₹ 299.97 ₹

NinetySeven Only

6 to 32 A DP MCB

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase

240 V. having characteristic of quick action & tripping with all advance feature & do not Rupees One Thousand Nine Hundred

incorporate any electronic component. for following Max. rating erected as directed SixtyNine Paise Fifty Only

25 to 32A / 30mA/100 mA DP ELMCB

Rupees Two Thousand Two Hundred

ThirtyFive Paise Thirteen Only

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having following Rupees Five Hundred EightySeven

capacity Paise EightyTwo Only

(a) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having following Rupees Six Hundred FourtySeven

capacity Paise FourtyOne Only

(b) 40 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Rupees Five Hundred NinetyFive Paise

6 to 32A FP MCB Ninety Only

Supplying & erecting power contactor for time switch complete erected as per direction

Rupees One Thousand Eight Hundred

EightyThree Paise SixtyFive Only

[B] 2 pole 250V 32 Amp.

Supplying & erecting power contactor for time switch complete erected as per direction

Rupees Two Thousand Seven Hundred

EightyTwo Paise FiftyFive Only

[D] 4 pole 440V 40 Amp.

Supplying & erecting approved make Digital time switch having lithium cell 6 years

operative and operate battery backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup Rupees Three Thousand One Hundred

time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. SixtyEight Paise ThirtySeven Only

Programming switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as directed.

Sub Total 1.4 ..... ₹

Cable Trenches, Manholes & Pipes

Making trench in soft soil of suitable width of 90 cms deep from the final ground level or

road level for laying cable or locating the fault all over the run and backfilling the same &

166 mt 8800.00 ₹ 55.55 Rupees FiftyFive Paise FiftyFive Only ₹

clearing the site by removing debris & Shifting of the debris & making site good As per

the Instruction of the Engineer Incharge.

Making trench in Hard murum / Tar Road of suitable width of 90 cms deep from the final

ground level / road level for laying cableor locating the fault all over the run and backfilling Rupees SeventyFour Paise

the same and making the surface proper. by removing debris & Shifting of the debris & SeventyFour Only

making site good As per the Instruction of the Engineer Incharge.

Rupees Three Hundred FiftySeven

168 (B) If additional machinery like hammer driller or JCB use [Add] mt 1950.00 ₹ 357.54 ₹

Paise FiftyFour Only

Covering of cable with second class bricks laid cover the cable crosswise & also on both

sides with covering of 7. 5 Cms. layer of sand above & below cable (cable shall be laid in Rupees One Hundred Fourty Paise

0.9mtr.deep & 0.4 Mtr.wide trench). Where there are more than one cable in the trench ThirtyNine Only

on either side of the cable, 5 Cms. over lapping of bricks shall be provided.

Driling the road without breaking the road surface (Asphalt) for laying of cable for feeding

Rupees Four Hundred NinetyTwo Paise

170 power supply by making Suitable size of holes at both ends complete. mt 870.00 ₹ 492.88 ₹

EightyEight Only

(A) Up to 100 mm bore dia

Driling the road without breaking the road surface (Asphalt) for laying of cable for feeding

Rupees Six Hundred Sixteen Paise Ten

171 power supply by making Suitable size of holes at both ends complete. mt 470.00 ₹ 616.10 ₹

(B) Up to 150 mm bore dia

Construction of brick masonery pulling chamber 1250 mm x 1250 mm inside clear size

and depth upto 1.2 meter with 350 mm thick masonery in cerment mortar proporation

1:5,cement finish cement plaster in CM proportion of 15 mm thickness from inside with

Rupees Eighteen Thousand Six

150 mm thick PCC at bottom with top slab minmum 200 mm thickness in M20 grade with

172 no 130.00 ₹ 18,699.14 Hundred NinetyNine Paise Fourteen ₹

reinforcement. The rate shall be inclusive of providing and fixing frame and cover of FRC

for the Heavy Duty. Rate also inclusive of excavation and back filling & clearing the site

by removing debris & Shifting of the debris & making site good As per the Instruction of

the Engineer Incharge complete in all respect.

Providing & laying. Double walled corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II ) Anti Rodent type with necessary connecting accessories of same material

at required depth for laying of cable. below ground / road surface for enclosing cable

with Excavation and backfilling the same to make ground as per original.

173 (A)50 mm dia mt 500.00 ₹ 62.62 Rupees SixtyTwo Paise SixtyTwo Only ₹

Rupees NinetyFive Paise NinetyFive

Rupees One Hundred ThirtySeven

Paise ThirtySix Only

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying of Rupees One Hundred SixtyThree Paise

cable. The pipes as following size of dia & weight per 6 mtr. SixtyTwo Only

(B) 50 mm inner Dia.

Rupees Four Hundred NinetyOne Paise

EightySeven Only

Rupees Seven Hundred ThirtyTwo

Paise TwentyFive Only

Providing and erecting 1.5 mm thick FIA approved and ISI mark (embossed) RIGID PVC

PIPES of following size complete erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following type of erection.

For erecting concealed / Open in wall/slab along with continuous fish wire to draw mains,

laid in approved manner with plastering by cement mortar & finishing the surface to match

the wall/ceiling.

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Rupees ThirtyThree Paise ThirtyThree

180 (B) 32mm mt 230.00 ₹ 54.54 Rupees FiftyFour Paise FiftyFour Only ₹

Rupees SixtySeven Paise SixtySeven

Sub Total 1.5..... ₹

Supply and Laying XLPE(IS:7098) )(I)-88 ISI marked armored cable of Cu. / Aluminum

conductor of 1.1 KV.grade of following sizes in ground or in pre-laid DWC pipe /

Trenches with necessary cable identification mark to be provided at distance of 15 mt. &

with 2 nos. of 16 SWG G.I. wire continuous in length per cable.

Rupees Two Hundred Twenty Paise

Rupees One Hundred EightyThree

183 25 sq.mm x 4 c Al. cable mt 330.00 ₹ 183.82 ₹

Paise EightyTwo Only

Rupees One Hundred FiftyThree Paise

184 16 sq.mm x 4 c Al. cable mt 4180.00 ₹ 153.52 ₹

Rupees One Hundred Fourty Paise

185 10 sq.mm x 4 c Al. cable mt 5980.00 ₹ 140.39 ₹

ThirtyNine Only

Supplying and laying Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked

copper wires of following size.

186 1.50 Sq.mm 3 core round PVC sheathed mt 4000.00 ₹ 46.46 Rupees FourtySix Paise FourtySix Only ₹

Rupees SeventySeven Paise

187 2.50 Sq.mm 3 core round PVC sheathed mt 280.00 ₹ 77.77 ₹

SeventySeven Only

Rupees One Hundred TwentySeven

188 4.00 Sq.mm 3 core round PVC sheathed mt 280.00 ₹ 127.26 ₹

Paise TwentySix Only

Sub Total 1.6..... ₹

Cable Termination

Supplying & fixing Double Compression type Brass glands & making joint with necessary

crimping socket of long nack type connecting the same to various equipment etc. for the

following sizes:

Rupees One Hundred FiftyOne Paise

189 35 sq.mm x 3.5 c Al. cable no 10.00 ₹ 151.50 ₹

Rupees One Hundred TwentySeven

190 25 sq.mm x 4 c Al. cable no 12.00 ₹ 127.26 ₹

Paise TwentySix Only

Rupees One Hundred Twelve Paise

191 16 sq.mm x 4 c Al. cable no 276.00 ₹ 112.11 ₹

Rupees NinetyNine Paise NinetyNine

192 10 sq.mm x 4 c Al. cable no 722.00 ₹ 99.99 ₹

193 4 Sq.mm x 3c Cu. XLPE ARM Cable no 26.00 ₹ 56.56 Rupees FiftySix Paise FiftySix Only ₹

Sub Total 1.7..... ₹

Street light Poles & High Mast

Drawings to be approved by Consultant.

Supplying and erecting approved make Conical Pole (Medium Duty ) Made from HR

sheet steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, with required base plate and integral Junction box

consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rupees Six Thousand Eight Hundred

194 Rail for MCB Mounting, stud type terminal and arrangement for cable terminations as no 496.00 ₹ 6,885.17 ₹

EightyFive Paise Seventeen Only

erected on suitable foundation (included) with necessary GI nut-bolts/J-Bolts. as per

details given by manufacturer considering site requirement. The length of poles are as

(B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness

Supplying and erecting approved make Conical Pole (Medium Duty ) Made from HR

sheet steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, with required base plate and integral Junction box

consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and arrangement for cable terminations as Rupees Fifteen Thousand One Hundred

erected on suitable foundation (included) with necessary GI nut-bolts/J-Bolts. as per ThirtyOne Paise EightyTwo Only

details given by manufacturer considering site requirement. The length of poles are as

(F) 8 Mtr. Long 70 mm Top X 190 mm bottom dia, 3 mm thickness

Providing and erecting street light pole bracket comprising main B Class GI pipe of

cm/require outside dia. complete with suitable B Class G.I sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient

fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as Rupees Six Hundred Fourteen Paise

per site condition & suitable welded stiffener reducer and nipple with check nut complete Eight Only

painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms.

[A] Single Arm bracket 1 Mtr

Rupees Eight Hundred TwentyNine

197 [B] Double Arm Bracket 1 Mtr Ea 115.00 ₹ 829.21 ₹

Paise TwentyOne Only

Rupees One Thousand FourtyFive

198 [C] Three Arm Bracket 1 Mtr Ea 15.00 ₹ 1,045.35 ₹

Paise ThirtyFive Only

Sub Total 1.8..... ₹

Luminaries with all electrical accessories & it should be energy efficient, low loss, ortho

cyclically wound open construction copper ballast, ignitor & power factor improvement

capacitor etc are prewired upto the terminal block & mounted on a removable control gear

module for ease of maintenance. All electrical connections of the control gear module `

with the rest of the luminaire should be click fix & foolproof & require use of no tools.

Mounting options should be for both lateral as well as pole top mounting

Note : All Outdoor Fixture should be minimum IP66

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.9, THD < 15%, CCT 3000 K to 6500K,

Rupees Three Hundred SeventyThree

199 Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting required no 10.00 ₹ 373.70 ₹

Paise Seventy Only

LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet, Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT

3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( Rupees Two Hundred Twenty Paise

fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown Eighteen Only

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT

3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( Rupees Five Hundred EightyNine Paise

fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown EightyFour Only

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV

Supply of LED street light luminaire with Dimmable Driver with system power (100W )±

5% , Available in color temperature (3000K-5700K) ,CRI>80, SDCM<3 , LEDs used

have a life of 100,000 burning hrs. & Lumen maintenance as per L90 with high power

white LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 150 lm/w. The Luminaire System efficacy should be of >=135LPW. The fixture

housing must be Made of ADC 12 PDC Aluminium housing for rapid thermal healing &

Powder coated by Corrosion resistant Nano coating technology. The luminaire PCB

Used for Making Light Engine should be Metal Core PCB made of high grade Al

with minimum 70 micron copper thickness & 2 W/mk thermal conductivity for better

thermal maintanance for light Engines.Luminaire must have a Ingress protection of IP66

Rupees Ten Thousand One Hundred

202 and Impact Resistance of IK08. The fixture should have an Injection moulded special PC no 321.00 ₹ 10,105.05 ₹

Five Paise Five Only

lens optics ensuring low glare & best in class uniformity of >0.45. The luminaire must

have Integral encapsulated high efficiency electronic driver of efficiency > 85% having a

Aluminium extrusion construction with rated voltage of 140-270V, power factor > 0.95,

THD < 10%, with Inbuilt surge protection of 10KV and upgraded with integrated IP67

protected SPD of 20KV/10KA surge protection with all necessary safety protection like

mis-wiring, Over voltage, Short circuit, Reverse Polarity protection.

Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge :

IEC 61000-4-5, EMC : EN

IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab.

SITC of Decorative outdoor luminaire powder coated 45 watt BIS certified having top

canopy made of corrosion resistant spun aluminium and bottom hosuing made of

aluminium pressure die cast. The luminaire must have UV stabilized Polycarbonate

Protector providing high impact resistant of not less than IK-10. The body of fixture must

have separate control gear compartment and sealed optical compartment to achieve

IP66 grade protection. Each LED shall be provided with a highly efficient lens for uniform

photometric distribution. Overall luminous efficiency of luminaire shall be minimum 80 Rupees TwentyOne Thousand Two

203 Lm/W at correlated colour temperature (CCT) of 4000K. colour rendering index (CRI)>70 no 530.00 ₹ 21,255.45 Hundred FiftyFive Paise FourtyFive ₹

and residual flux of 70% (L70) @ 50,000 hours. The luminaire shall have white internal Only

reflector to achieve glare free indirect lighting photometry for visual comfort achieved as

per IS Standards. The luminaire should be deigned for Electrical Class I and must operate

at any voltage from 120V to 277V, with Power Factor ≥ 0.95 and shall be provided with

internal surge protection of minimum 4 kV and external surge protection of 10/10 kV (in

both Common & Differential Modes). Luminaire is suitable for operating temperature (Ta)

from -10° to 50°C. Manufacturer must have CE compliance.

Sub Total 1.9..... ₹

Plate Type Earthing

Supplying & erecting funnel type earthing having earth plate of following size burred in

specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt with

alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for

watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with

necessary length of double Galvanised Iron / copper earth wire No 6 SWG bolted with lug

to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the

nearest switch gear with end socket as per direction & duly tested by earth tester

confirming to IS (As per drawing) with following specification

Rupees Two Thousand Five Hundred

204 (B) With 45 x 45 x 0.35 cms. C.I. earth plate no 18.00 ₹ 2,568.43 ₹

SixtyEight Paise FourtyThree Only

Chemical Type Earthing ( Ashlok or equivent )

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Supplying & erecting in earthpit of minimum bore dia. 225mm size , approved make Safe

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

Copper Pipes having Outer pipe dia of 50mm having , Inner pipe dia of 40 mm

connection terminal dia of 14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

(b)For Electrical installation up to 11 KV in normal soil.

Rupees Five Thousand Seven Hundred

205 Length of Pipe : 2.00 mtrs no 160.00 ₹ 5,760.03 ₹

Sixty Paise Three Only

Back filling Compound :1 no. Bag of 25 Kg.

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

Rupees Three Hundred SixtyEight

206 galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete no 672.00 ₹ 368.65 ₹

Paise SixtyFive Only

with necessary 8 SWG earth wire.

Earth wire/strips :

Supply and laying required size Cu/GI. earthing strips for interconnecting the earthing

stations, panels, section piller etc. in built up trenches, on walls/ceiling, buried in ground

generally as specified and shown on drawings complete with :

a) Fixing accessories.

b) Corrosion protection of buried conductors with bituminous coating and covered with

Rupees SeventySeven Paise

SeventySeven Only

Rupees Seven Hundred NinetyFour

208 No.8 gauge bare cu. earth wire Kg. 295.00 ₹ 794.87 ₹

Paise EightySeven Only

Rupees SeventySeven Paise

209 No.8 gauge bare GI. earth wire Kg. 4450.00 ₹ 77.77 ₹

SeventySeven Only

Sub Total 1.10..... ₹

Liason / Follow UP with Supply Co.

Filling the necessary application to supply co. following up and getting the supply filling the

necessary test report to the supply co. inclusive. All official fees including security

deposits will be paid by the Contractor and reimbursed by client and out of pocket

expenses shall be of contractor.

More than 10 KW

210 No 9.00 ₹ 5,050.00 Rupees Five Thousand Fifty Only ₹

Removing of existing pole, Pole Foundation, Light Fixtures, High Mast, Cables & Shifting

to the Clients store carefully. Written concent to be taken from the clients engineer for

material submitted at store. Any ambiguity in this matter will be at contractors scope.

Scope also includes the temporary illumination work ehere ever contractor

removes the pole, where ever dark patch is there & Where the old power source Rupees Fifty Thousand Five Hundred

is available, proper nos. of temporary Street light / flood light for illumination of Only

entire road length shall be provided and lux level should be maintain Average

25-35lux, arranged & maintained by the agency till the new poles are

commissioned and put in working order.

Sub Total 1.11..... ₹

Comprehansive Maintenance for Electrical Work, The all inclusive comprehencive annual

maintance contract cost covers yearly maintanance of Complete Electrical Work, etc with

material and labour cost including preventive & Comprehansive maintanance. The cost

Rupees EightyNine Thousand Nine

212 covers entire installation. GMC also includes monthly site visit and inspection of project Month 60.00 ₹ 89,991.00 ₹

Hundred NinetyOne Only

with submission of inspection report of Electrical Work, Agency has to provide necessory

licening work for warranty, power ,Bidirectional meter etc operation & Maintenance for

years + 3year Extendable after handing over of work

Sub Total 1.12..... ₹

Buy back of Existing Pole, Bracket & Section Feeder Panel

Existing pole and bracket Buy back of any height includes loading unloading,

213 Kg. 6000.00 ₹ 30.30 Rupees Thirty Paise Thirty Only ₹

transportation Includes, remove pole at site in presence and approval by site in charge.

Buy Back of Existing Section Feeder pillar ncludes loading unloading, transportation Rupees Five Thousand TwentyOne

Includes, remove pole at site in presence and approval by site in charge. Paise ThirtySeven Only

Sub Total 1.13..... ₹

Comprehensive maintenance of all landscape elements including manpower providing for

a continuous period of 60 months, including routine horticultural care of trees, shrubs,

hedges, groundcovers, lawns (if applicable), planter beds, median/verge plantations, and

green pockets. The contractor shall carry out regular watering by manual methods,

weeding, soil loosening, mulching, pruning, shaping, pest and disease control, and

scheduled application of manure, compost, and fertilizers to ensure healthy, vigorous, and

uniform plant growth throughout the corridor. The scope includes the replacement of any

dead, damaged, or underperforming plants with the same species and size to maintain

complete planting density as per the original design intent. Routine cleanliness of

landscaped areas—including removal of litter, fallen leaves, pruning waste, and

215 maintaining tidy edges of planter zones, tree pits, medians, and green strips—shall be

performed to ensure a neat and visually appealing environment. The contractor shall

deploy adequate trained manpower, such as gardeners and supervisory personnel, to

perform daily horticultural upkeep, seasonal plant care cycles, plant health monitoring, and

corrective actions as required, and shall prepare and submit monthly inspection and

maintenance reports documenting plant condition, watering (manual) cycles, pest/disease

treatments, fertilization, and replacements made. All horticultural consumables—including

fertilizers, pesticides, soil additives, mulch, stakes, ties, and necessary hand tools—shall

be supplied by the contractor. The contractor shall ensure that the entire landscaped

stretch remains healthy, visually consistent, safe, and well‑maintained throughout the

5‑year O&M period.

I/We am/are willing to carry out the work at…………………. % above/below percent (Should be written in figures and words) of the estimated rate mentioned above. Amount of my

Quantity Rate Amount

Sr. No. Description Total

Rate Rate in Figure Amount

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Deduct………% Above

In words In words

1 All works shall be carried out as per Public Work Department and other specification of division or as directed.

2 All the columns in the contractor be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.

3 Rates quoted include clearance of site (prior commncement of work and its close). In all respect and held good for work under all condition, site, moisture, weather etc.

4 To be continued on additional sheets, if found necessary.

5 The Labour Cess will be deducted as per prevailing rules i.e.1% of the work done.

6 GST is applicable seperatly for all type of works by the Client (Total Tender Cost is without GST).

7 For abnormal high or law rates payment of such items shall be regulated as per Govt. Circular letter No. Parach-10200861-S

8 From dt. 1-7-2017 GST is applicable hence Agency should quote price accoringly. Any dispute regarding this will not be considered by GMC

9 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

10 GST and Income tax TDS will be deducted at a source while making payments of bills.

11 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/ 2017 Cement Consumption/ 16/ C Date:11/ 05/ 2017 as stated in S.O.R. therefore

Signature of Contractor Deputy Municipal Commissioner, Gandhinagar Municipal Corporation, Gandhinagar