OUTSOURCING OF RESOURCES FOR MANAGEMENT AND OPERATION OF VARIOUS E/M INSTALLATION AT DOMESTIC AREA AND REPAIR/MAINTENANCE /SERVICING OF SCADA AUTOMATED WATER SUPPLY NETWORK SYSTEM IN WATER SUPPLY INSTALLATIONS AT AFS UNDER GE(AF) JAMNAG No 2

Amount

General Notes: - (i) Contractor’s special attention is invited that Estimated cost for Management & Operation of E/M installation is Rs.17,98000.00 based on prevailing rate of Schedule of Minimum fair wages. If the quoted amount is less than the amount the work, then the lowest bidder will have to deposit FDR/BGB in favour of Accepting Officer within 07 days of opening of Financial Bid for the difference in estimated cost & quoted amount. (ii) In case the said FDR/BGB is not submitted within stipulated period as mentioned above, the contractor shall be banned for 06 months & their bid will be rejected and finance bid will not be opened. FDR/BGB submitted shall be released only after satisfactory completion of work on submission of proof of payment that all the person deployed under this contract has been paid not less than Schedule of Minimum fair wages as mentioned under Note No.3.2 here in after.

Outsourcing for Manning and Operation of MAP Pump House water supply installation,Athithi bore well , Billet area bore well , SNCOs bore well , operating of valves for filling of UG sump,operating of valves for distribution of drinking water as per schedule at Air Force station Jamnagar for continous operation of various assests such as Pumps, motors, chemical dozing plant , water supply headers and operation of DG set (in absence of electric supply) to provide water supply to various users located at MAP accn area and other locations by providing one fitter general mechanic (FGM), with minimum 2 years of experience for opeartion of pumping and distribution system , per shift of 8 hours for 2 shifts per day (including sunday and National holiday).

The water supply installation comprising of following components (a) Centrifugal Pump set ,Type : DSM 100/36 directly coupled with 50HP 3 phase electric motors- 2 Nos, Sumersible pump with 7.5HP motor -02 nos & Sumersible pump with 5HP motor -01 nos(b) Chlorine dosing system complete with preparation tank , dosing pump and electric motor-01 nos. (c) SCADA Control panel with controlling system for water supply of MAP phase-II Md accn - 01 nos. (d) Non return Valve/Sluice Valve/ Butterfly valve / Gate valve of size 50/80/100mm = 10 Nos. (e) Motor control starter panels = 02 Nos(f) DG set 100KVA with AMF panel -01 nos.

The Contractor shall be responsible for routine/preventive maintenance of eqipments(DG set and Pumping set) and accessories , cleaning of surrounding area of the installation and the building, valve pits , earth pits , minor repair to leakage from pumps by providing gland packing, replacement of flange gasket in valves and maintenace of control panel for pumping set/LT panel , tightening of loose connections in panels and providing insulation on burnt /exposed cable/wire etc. .The contractor should carry out routine/periodic maintenance of all installed equipment/components as per schedule mentioned at particular specification. The contractor and his opeartor must adhered to all instructions contained in Notes and Particular specification . Nothing extra has been admissible for routine/preventive maintenance as mentioned above.Non compliance of instructions contained in Notes and Particular specification may leads to recovery as deemed fit at the discretion of accepting officer.

Outsourcing for Management and Operation of Mig 29 complex Pump House water supply installation, and DSC bore well operating of valves for filling of UG sump,operating of valves for distribution of water as per schedule decided by Engr-in-charge at Air Force station Jamnagar for continous operation of various assests such as Pumps, motors, chemical dozing plant , water supply headers and operation of DG set 32.5KVA (in absence of electric supply) to provide water supply to users located at Mig 29 complex area, AC Plant , Annexe A Bldg , Annexe C Bldg , Hanger and other bldg located around the complex by providing one fitter general mechanic (FGM), with minimum 2 years of experience for opeartion of pumping and distribution system , per shift of 8 hours for 2 shifts per day (including sunday and National holiday).

The water supply installation comprising of following components (a) Centrifugal Pump set cap 2650 lpm directly coupled with 3 phase electric motors- 2 Nos, Sumersible pump with 7.5HP motor -01 no (b) Chlorine dosing system complete with preparation tank , dosing pump and electric motor-01 nos. (c) Non return Valve/Sluice Valve/ Butterfly valve / Gate valve of size 50/80/100mm = 10 Nos. (e) Motor control starter panels = 01 Nos(f) DG set 32.5KVA with AMF panel -01 nos.

The Contractor shall be responsible for routine/preventive maintenance of eqipments(DG set and Pumping set) and accessories , cleaning of surrounding area of the installation and the building, valve pits , earth pits , minor repair to leakage from pumps by providing gland packing, replacement of flange gasket in valves and maintenace of control panel for pumping set/LT panel , tightening of loose connections in panels and providing insulation on burnt /exposed cable/wire etc. The contractor should carry out routine/periodic maintenance of all installed equipment/components as per schedule mentioned at particular specification. The contractor and his opeartor must adhered to all instructions contained in Notes and Particular specification . Nothing extra has been admissible for routine/preventive maintenance as mentioned above.Non compliance of instructions contained in Notes and Particular specification may leads to recovery as deemed fit at the discretion of accepting officer.

Outsourcing for Manning and Operation of DSC & NCE Pump House , Open well ,DSC Borewell,Education Bore well and Dhobi Ghat bore well , operating of valves for filling of UG sump,operating of valves for distribution of drinking water as per schedule at Air Force station Jamnagar for continous operation of various assests such as Pumps, motors, chemical dozing plant , water supply headers and operation of DG set (in absence of electric supply) to provide water supply to various users located at DSC & NCs Md Accn area and other locations by providing one fitter general mechanic (FGM), with minimum 2 years of experience for opeartion of pumping and distribution system , per shift of 8 hours with 2 shifts per day (including sunday and National holiday).

The water supply installation comprising of following components (a) Centrifugal Pump set ,Type : DSM 100/36 directly coupled with 100HP 3 phase electric motors- 2 Nos(b)Centrifugal Pump set directly coupled with 20HP 3 phase electric motors- 1 Nos(c) Submersible Pump set coupled with 10HP 3 phase electric motor-01 nos and Submersible Pump set coupled with 20HP 3 phase electric motor-01 nos, Non clog sewage pump set with motor of cap 10 HP -02 nos .(c) Chlorine dosing system complete with preparation , dosing pump and electric motor-01 no. (d) Steel water tank water media filter -01 nos and FRP Pressurized vessel water filter -02 nos. (e) Non return Valve/Sluice Valve/ Butterfly valve / Gate valve of size 50/80/100mm = 22 Nos. (f) Motor control starter panels = 02 Nos(g) DG set 125KVA with AMF panel -01 nos.

The Contractor shall be responsible for routine/preventive maintenance of eqipments(DG set and Pumping set) and accessories , cleaning of surrounding area of the installation and the building, valve pits , earth pits , minor repair to leakage from pumps by providing gland packing, replacement of flange gasket in valves and maintenace of control panel for pumping set/LT panel , tightening of loose connections in panels and providing insulation on burnt /exposed cable/wire etc. .The contractor should carry out routine/periodic maintenance of all installed equipment/components as per schedule mentioned at particular specification. The contractor and his opeartor must adhered to all instructions contained in Notes and Particular specification . Nothing extra has been admissible for routine/preventive maintenance as mentioned above.Non compliance of instructions contained in Notes and Particular specification may leads to recovery as deemed fit at the discretion of accepting officer.

Notes for Item no.1 to 3: (a) Wage paid by the contractor to the persons employed shall not be less than the minimum wages fixed by State/Central Government from time to time whichever is higher. The payment shall be made to the workers through a nationalised bank and the bank statement of fair wages as per minimum labour wages as mentioned above shall be submitted along with the RARs/FB for payments. (b) The contractor shall be responsible for the EPF, ESI, bonus, Safety etc. and insurance of all trademen employed by him as per existing Labour Rules/Acts/Regulations. (c) Contractor special attention is invited that payment of operator / labour shall be made only through Account payee cheque and same shall be deposited in Adhar link account of operator / labour. Documentary evidence for the same shall be submitted to Engineer -in-Charge before payment of RAR / Final bill.

(d) Contractor and his personnel detailed for manning of Pump house and Borewell shall be responsible for serviceability of Pumpset,Diesel engine generating set, Valves. In case of any major fault occurs in above mentioned items, he will be report directly to concerned JE E/M / AGE E/M. Person deputed for operation will be responsible for minor maintenance such as checking of oil, checking of Diesel, oiling and greasing of Valves,Drawing disinfectant from MES and pouring it to dozing system to maintained required PPM level as per IS norms, informing MES and maintaing sufficient balance in storage tank for DG set as and when required, checking of battery terminal and cleaning of DG Sets,Pumpset,Valves cleaning of Pump house room and surrounding areas complete. (e) Necessary weekly off will be given to all the manpower employed for this schedule as per existing rules and regulation of state /central govt. and necessary replacement or reliver shall be provided by the contractor. Rates quoted for this schedule shall deemed to be include the payment of reliever also.nothing extra shall be admissible on this account.

(f) In case absence of any operator / workmen from any shift will be penalized with a penalty of double the rate quoted by the contractor in addition to the shift not taken in to consideration for payment. Attendant / Operator wanting leave will get it sanctioned before proceeding on leave along with the name of individual who will be performing his duty/shift in his absence. No replacement of operator/workmen without the knowledge of department will be allowed. (g) Safety equipment's, tools and first aid kit ,sanitization kit and hand gloves must be provided by the contractor to all tradesman without adding any extra cost to government.Initimation regarding this must be conveyed to Engr-in-charge and GE by the contractor in writing within 08 days from the date of commencement. (h) Log book (Sheet), Muster roll, duty roster, fuel consumption register, daily breakdown register, attendance register and other requisite registers shall be maintained by operator and get it signed by concerned JE, Engineer-in-charge and contractor on daily basis and same shall be submitted monthly to accepting officer for inspection and other details as specified in PS.

(j) Operator should posses ITI certificate in respective trade with minimum 02 years experience for running of installation and well conversant with the Pump set equipment's with connected panel and opeartion of DG set and must produce qualification and experience certificates duly attested by gazetted officer. The attested certificate shall be submitted to accepting officer at the time of commencement of work. (k) Contractor should be responsible for maintaining parameter such as TDS & PH as per IS standard. Any deviation of results in comparision to IS standard may attract penalty @ 500/- per day per report. Contractor must keep daily record of various parameter ( TDS & PH) and put up to AGE E/M weekly for correctness . Any measuring instrument/kit required for measurement of parameters must be provided by the contractor to the operator. (l) Contractor / his operator will be responsible for continous running of the installations any failure due to negligence of operator may attract penalty @ Rs. 500/- per hour till restoration . (m) The routine/preventive measures as per Appx "A" of above equipment /plant deemed to be included in the unit rates quoted against this item.

(n) Contractor should provide proper dressing to all the operator as directed by Engr-in- charge.Non compliance of instructions with respect to dressing may attract penalty @ Rs.200/- per day per operator. Initimation regarding this must be conveyed to Engr-in-charge and GE by the contractor in writing within 15 days from the date of commencement. (o) Operator must inform JE/AGE concerned within half an hour in the event of breakdown or failure of Pumpset/motor and electrical panel and even leakage of pipeline.Delay on this part will be treated as negligence of operator , which can attract penalty and per note 13. (p) All necessary stationery required shall be provided by contractor as per sample , cost of this is included in the cost of item. Contractor must be responsible to maintain stock of chemicals for water treatment at all the times and must intimate to concerned JE/AGE three days in advance whenever active stock is about to finish. (q) Contractor or his operator ensure handing/taking over of assest during change of shift , any part/component at installation found missing/damaged due to negligence will be treated as wilful damage and for this cost of replacement shall be recovered from contractor payment due.as per direction of Engr-in-charge.

(r) Contractor is fully responsible for any kind of mishaps/accident occurred due to ignorance/mishandling /misfunction/negligence while on duty by contractor operator.at the installations. Necessary insurance,for all operator, as per ESI rules must be obtain by the contractor.Initimation regarding this must be conveyed to Engr-in-charge and GE by the contractor in writing within 15 days from the date of commencement. (s) Contractor is responsible for maintaining daily records for water distributed to users.Record should be put up to AGE E/M duly signed by contractor and JE E/M.Non -maintenance of records will attract penalty at @ Rs. 300/- per day . (t) The contractor and his workmen shall comply existing labour laws , IE Rules ,Factory act in totally.

Deployment of man power for Collecting the sample of water, on monthly basis, from different point such as under ground sump , open well, bore well for chemical testing of water from reputed Govt Laboratory or any Laboratory authorized by Government for iron content in water , PH value, Hardness, turbidity, chloride, fluoride and other parameters as per IS standard. Submitting the test report to Engineer-in-Charge on 5th day of every month complete all as specified and as directed

Deployment of man power for Collecting the sample of water , on monthly basis, from different point such as under ground sump , open well, bore well for bacteriological testing of water rom reputed Govt Laboratory or any Laboratory authorized by Government including arsenic test from reputed Govt laboratory .Submitting the test report to Engineer-in-Charge on 11th day of every month complete all as specified and as directed.

Supply only calcium hypo chlorite high strength chlorination chemical (65% - 70%) for water disinfectant in granular from in factory sealed HDPE Container 45 to 50 Kg Make :- M/S Sree Rayalaseema Hi-strength Hypo Ltd. Note: (i)Contractor must submit/produce test report with hologram for the each lot/batch supplied by M/S Sree Rayalaseema Hi-strength Hypo Ltd to Engr-in-charge (iii) Each drum must be affix with Hologram (ii) Contractor must submit in writing about the ordered qty, date of packing of each drum , batch no and nos of drums and date of dispatch either on his letter head or from authorised dealer letter head. to Engr-in-charge.(iii) Non submission and non availability of above information leads to rejection of drum/ entire lot for which contractor is wholly responsible.

M & L for servicing/maintenance of dual media filter/pressured filter/Multigrade filter of any filtration capacity(m3/hr) and any specific dimension of vessel made from Carbon Steel IS 2062 grade steel plate installated at various locations , by dismantling and disconnecting inlet and outlet water connection,testing and checking of face piping, fittings, valves, filter media, under bed plate fitted with strainer, pre/post filter pressure gauges, cocks, manhole, hand hole, air vent system cleaning of existing sand gravel/media for removal of algae on walls and media using pressurized water arrangement to obtain discharge rate as per existing or higher rate after cleaning/servicing and testing of entire collection system(Header/Lateral) and frontal piping system for leakage after reassembling complete all as specified and as directed by Engr-in-charge.

Note:(i) All parts such as valves/gauges/pipe and other connected accessories if found unsv shall be replaced under respective items (ii) Replacement of filter media such as sand , gravel and antracite as per existing size shall be replaced/replenish depending on the quality and quantity of media with the prior approval of Engr-in-charge under respective item.(iii) All necessary arrangement required at site for testing/checking shall be arranged by the contractor on his own expenses.

All as per item no.7above but for activated carbon filter/pressure carbon filter(Granules activated carbon/ powdered activated carbon) of any flow rate and dimensions.

Taking out existing sand filter media /gravel /sludge of filter media from filters of dual media filter/pressured filter/Multigrade filter of any filtration capacity(m3/hr) and any specific dimension ,stacking properly for reuse(depending on density ), depositing at a distance not less than 50 m apart from the starting point complete all as speicifed and as directed .

Supply and laying stone gravells/pebbles ,confirming to IS 8419-1977 laid in dry, in layers suitable for dual media filter/pressured filter/Multigrade filter of any filtration capacity(m3/hr) and any specific dimension for the following dimensions complete all as specified and as directed by Engr-in-charge. Note: Filter gravel shall consist of hard,preferably rounded stones with an avg specifiec gravity not less than 2.5 shall be free from clay, sand, loam and organic impurities of any kind.

Grade 10 to 6 mm size pebbles

Grade 20 to 12 mm size pebbles

Grade 40 to 25 mm size pebbles

Labour only for relaying of stone gravells /pebbles suitable for filter bed of filteration plant laid dry in layers obtained from taking down above all as specified and as directed by Engr in charge for following sizes :-

Grade 10 to 6 mm size pebbles

Grade 20 to 12 mm size pebbles

Grade 40 to 25 mm size pebbles

Supply and laying filter media, sand mesh ,confirming to IS 8419-1977 laid in dry, in layers suitable for dual media filter/pressured filter/Multigrade filter of any filtration capacity(m3/hr) and any specific dimension for the following dimensions complete all as specified and as directed by Engr-in-charge. Note: Filtration sand shall consists of hard ,durable grains of silica with an avg specifiec gravity not less than 2.5 shall be free from clay, sand, loam and organic impurities of any kind.

sillica quartz sand grade -0.45 to 0.5mm fine sand

sillica quartz sand grade -0.8 to 1.2mm coarse sand

Supply and laying activated carbons granular or granule activated carbon, of size 0.5 to 1.2mm , type 2, confirming to IS 2752;1995 laid in dry , suitable for activated carbon filter/pressure carbon filter(Granules activated carbon/ powdered activated carbon) of any flow rate and dimensions complete all as specified and as directed by Engr-in-charge Note: The material shall be packed and shall contain following information (a) Name and type of material (b) Gross and Net mass (c) Batch Number (d) Date of manufacture and indication of source of manufacture (e) Symbol indicating fire hazard.

Supply and laying black anthracite free from granules suitable for water filtration grade complete all as specified and as directed by Engr-in-charge

M& L for scarpping of old paint using emery paper, low off all residue, using clean, and oil free, dry compressed air , filling of cavity using filler material/putty for incomplete welds, or other mechanical defects and Painting of external surfaces for dual media filter/pressured filter/Multigrade filter/activated carbon filter of any filtration capacity(m3/hr) and any specific dimension of vessel made from Carbon Steel must be painted with two coats using Polyurethane finish paint MCC 2906 RAL 3002, Thickness- 40 - 50 microns DFT. over a coat of Epoxy Zinc Rich Primer MCC 1118 – color grey (base + hardener). Thickness- 50 - 60 micron DFT. complete all as specified and as directed by Engr-in-charge.

M&L for MS plates(plain or chequered) channels, square cut or notched(ordinary and counter sink),ordinary forming holes, for covering Fe-410W(GdeE-250) quality B duly painted with two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified

Supply, Installation, Testing and Commissioning of DUAL GPRS communication Modem 12 V to 24V DC along with suitable external antenna, patch chord and mounting accessories with following specification. Make: MOTOROLA / VISIONTEK / LEO / MAESTRO HERITAGE

Supply, Installing,Testing and Commissioning of Ultrasonic Level Transmitter at Pure Water Sump ( for measurement of level in Pure Water sump ) Range : 0-5 metres ,Accuracy : 0.5 % minimum supply Voltage : 24V dc Output : 4-20 mA Make : Banner / ABB / Emerson / SBEM / Krohne Marshall

Supply and Fix in repair single phase Preventor/ Phase Failure Relay with features such as (Auto / Manual / Remote Reset Adj. unbalance) Make - Minilec Model 1 :VSP D2 / L & T/ABB

Supply and fix in repair pluggable interface Relay CR-M with/without LED and base 4 C/O(SPDT) suitable for 24 V DC /230V AC. Make: LEONE/IDEC/ABB

Supply and fix in repair LED Indicator of existing size for panel mounting complete with holder and other accessories in colour Red /yellow/Green. Make : ESBEE / TEKNIC/TELEMEACHNIQUE/ABB

Supply and fix in repair non illuminated flush push button with plastic bezel in colour Red/yellow/Green. Make : ESBEE / TEKNIC/TELEMEACHNIQUE

Supply and Fix in repair water Flow switch suitable for Operating Pressure of 10 kgf/cm2 (1000KPa) and Withstand Pressure of 17.5 Kgf/cm2 (91750KPa) Make: Danfoss/ Rapid Control/Honeywell

Supply, Installation Testing & Commissioning of solenoid /Motorized valve suitable for 20 mm GI pipe for priming of pump including suitable bypass with necessary GI fittings like gate valve, barrel piece, double nipple, elbows/bends etc with following specifications: Size: 20 mm Pressure rating: 6 kg / sq. cm. Make: AVCON/ ROTEX/ ASCO/JOHNSON CONTROL

Supply, installation, testing and commissioning of 10 mm dia Brass / SS, direct Acting / Diaphragm tpye pilot operated Solenoid Valve for air release with manual bypass arrangement along with all necessary installation accessories like gate valve, barrel piece, double nipple, elbows/bends etc suitable for line pressure of 6 kg/sqcm. Make: ROTEX / AVCON / ASCO

Supply and Fix in repair Electric motor suitable for actuator following size. Make: Marsh/Ritetork/ Rotork

50 mm dia

80 mm dia

100 mm dia

150 mm dia

200mm to 250 mm dia

Supply and Fix in repair to MS spiral gear for gear box of actuator for . Butterfly valve following size. Make: Marsh/Ritetork/ for following

50 mm dia

80 mm dia

100 mm dia

150 mm dia

200mm to 250 mm dia

Supply and Fix in repair MS sector gear for gear box of actuator for Butterfly valve following size. . Make: Marsh/Ritetork/ following

50 mm dia

80 mm dia

100 mm dia

150 mm dia

200mm to 250 mm dia

Supply and Fix in repair Capacitor & Resistor(R C Circuit) for Actuator suitable for 50 / 80 / 100 / 150 / 200 / 250 / 300 mm dia Butterfly Valve

Supply of Hand Wheel for Actuator suitable for following size Butterfly Valve for the following size

50/80/100 mm dia

150/200/250/300 mm dia

Supply and Fix in repair Limit switch for Actuator suitable for 50 / 80 / 100 / 150 / 200 / 250 / 300 mm dia Butterfly Valve

Supply and fix external antenna for PLC to Modem Gain 9db all as specified and directed by Engr-in-Charge. Make: Pentagon/Cherry

Supply and Fix in repair SMPS input 230 V/AC, Output 24V DC. Make: NHP/TELEMEHANIQUE

Supply, Installation, Testing and Commissioning of Pressure Switch along with all necessary installation accessories like GI barrel piece, double nipple etc. having range 0-6 sq cm. With Weather proof enclosure. Make: INDFOSS / DANFOSS / SWITZER

Supply, installation, testing and commissioning of magnetic level sensor arrangement along with all necessary installation accessories. Make: RDS / MAHALAXMI / CRYSTAL

Supply, Installation Testing & Commissioning of Motor Actuated Butterfly Valve with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure along with wafer type butterfly valve with the following specifications. Valve size: 250 mm dia. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close Mounting : Indirect type with universal joint for installation above ground level with angle iron mounting arrangement Make: RITETORK / HASSEL HOFENER / EMTORK

Supply, Installation Testing & Commissioning of Motor Actuated Butterfly Valve with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure along with wafer type butterfly valve with the following specifications. Valve size: 150 mm dia. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close Mounting : Indirect type with universal joint for installation above ground level with angle iron mounting arrangement Make: RITETORK / HASSEL HOFENER / EMTORK

Supply, Installation Testing & Commissioning of Motor Actuated Butterfly Valve with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure along with wafer type butterfly valve with the following specifications. Valve size: 100 mm dia. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close Mounting : Direct Make: RITETORK / HASSEL HOFENER / EMTORK

Supply, Installation Testing & Commissioning of Motor Actuated Butterfly Valve with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure along with wafer type butterfly valve with the following specifications. Valve size: 80 mm dia. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close Mounting : Direct Make: RITETORK / HASSEL HOFENER / EMTORK

Supplying and fixing on wall / drawing through existing pipe/trench 2 x 1.5 sq. mm. PVC insulated and PVC sheathed armoured copper cable etc as required. MAKE: POLYCAB/FINOLEX/HAVELLS

Supplying and fixing on wall / drawing through existing pipe/trench 4 x 1.5 sq. mm. PVC insulated and PVC sheathed armoured copper cable etc as required. MAKE: POLYCAB/FINOLEX/HAVELLS

Supplying and fixing on wall / drawing through existing pipe/trench 6 x 1.5 sq. mm. PVC insulated and PVC sheathed armoured copper cable etc as required. MAKE: POLYCAB/FINOLEX/HAVELLS

Supplying and fixing on wall / drawing through existing pipe/trench 5 pair x 0.5 sq. mm. PVC insulated and PVC sheathed armoured copper cable etc as required. MAKE: POLYCAB/FINOLEX/HAVELLS

Supplying & laying factory made unreinforced precast cable cover LV type 1 flat of size 250 x150 x 40 mm thick all as directed by Engr-in-Charge.

S&F GI tubing light grade, ISI Marked conforming to IS 1239 Part-I 2004, 50mm bore with and including all fittings such as bends , elbows,tees, short length , socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and as directed. Make: Jindal/Tata steel/Prakash surya

Provision of payment against broadband/GPRS connection in the name of GE for SCADA communication system at Main Pump House, Sardar OHT, Prem nagar OHT ,New Super OHT,Officers old and New OHT, SSQ OHT, Old project OHT , MAP Pump House, DSC Pump house with different static IP ,on the PC including all expenses for communication,and internet charges for period of 7 months .or from the period of commencement till completion of contract agreement

PLC based Graphic Mimic " colour touch screen HMI with minimum Panel with appropriate number of inputs and putputs and Nos. serial ports ands no. USB port. The panel shall be of suitable size,made out of aluminium/CRCA sheet steel that shall clearly depiot the entaire llayput of the water supply system.The same shall include pump status, valve status, level of tanks,etc.this shall be an online indication panel. Make : RECKTRONIC DEVICES AND SYSTEMS /Cimcon systems

Repair/maintenance, excluding spares but including regular maintenance of the Automatic water supply system installed at AF STN Jamnagar including carrying out complete maintenance/serving/repairs with establishing Ladder Logic programming as required of all the sub systems viz. PLC based control panels (with all the accessories), breakdown maintenance and replacement of unserviceable parts, refixing of old serviceable parts / new parts if any including the followings and all as specified and directed by Engineer-in-Charge:- (a) Equipments:- (I) Establishing Ladder Logic programming with Automation Control Panel at location Main Pump house, MAP Pump house, sardar OHT, Premnagar OHT & New Super OHT, SSQ OHT, Old officer OHT, Old Project OHT, Harbhajan Borewell., MAP Header, MAP Building and MIMIC Panel at Main Pump house,DSC Pump House

Notes :- (i) The scope of work includes the charges required for removing, repairing, refixing, carrying out electrical termination and fixing/installing, testing, commissioning, etc.establishing Ladder Logic programming and all as directed.(ii) New parts if any shall be paid under separate items (iii) Unit rate quoted by tenderer is of checking of system fortnightly and necessary servicing, repair and the register will be maintained to that effect. (iv) In addition to above specific emergency complaints from time to time shall be attended after receiving the same. (vi) The rate includes Periodical repair/maintenance by disconnecting cleaning greasing for the following items: (a) Pressure switch (b) Solenoid Switch / Priming valves (c) Water Magnetic level sensor (d) Water Ultrasonic level sensor (e) Motorised valve 50 mm to 300 mm bore

Supply and Fix in repair water Level Controller PCB-5/10 Level. Complete all as specified and as directed by Engr-in-chargeMake:- SPLASH/RDS/ICS/Cimcon

Excavation in trenches in hard dense soil n.exc 1.5 mtr wide & n.exc 1.5mtr in depth and n. exc. 10sqm on plan for laying pipe in trenches and getting out complete all as specified and directed.

Returning filling in trenches, spreading, levelling, watering and well ramming in layers n.exc 25cm in hard dense soil complete all as specified and directed.

Removing of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified and directed.

Supply only Bleaching Powder Gde-I quality contains 20 to 25 % active chlorined ISI marked all as specified and directed by Engr-in-Charge

Supply only Potash Alum crystal type or Water Soluble Alum Crystals as a flocculant for water purification cpmplete all as specified and directed by Engr-in-Charge.

M&L for fabrication & fixing in position mild steel work for covers, supporting clamps of pipe, ladders, railing of over head water tank, under ground sump , Open well & water supply installation fabricated with mild steel section such as angle, flat, Tee, nut & bolt etc etc, cutting, welding cold or hot drilling holes in any shape or size and fixing arrangement, including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete using steel section of Fe 290 Grade -165 including dismantling of old steel work all as specified and directed by Engr-in-charge.

Vijay Construction Co

SURESH ELECTRICALS

M/S Badri Electicals

Hirachand Sunderji and co

Ravi enterprise

fakhrie apostrical

M/s Balaji Enterprise