Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.0 LAccepted-AOC 121 BEHARIPUR MEMARAN BAREILLY UP PIN 243001 | BAREILLY | BAREILLY | UTTAR PRADESH | 243001 | L1 | Accepted-AOC Being reasonable | |
| 2 | L2₹31.8 L+₹7.8 L (32.6%)Rejected-Finance | L2 | Rejected-Finance Not being L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
13 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Surya Shreedhar, GE (AF) Bareilly
Garrison Engineer (AF) Military Engineer Services, Bareilly 243002 (UP)
8702 REPAIRS AND MAINTENANCE OF AIRCRAFT HANGAR DOORS, ROOF SHEETING AND OTHER MECHANICAL GATES AT AF STATION UNDER GE (AF) BAREILLY
2023_MES_574717_1
8702/E8
Open Tender
Civil Works
Item Rate
180 days
Bareilly
Class D
Category a i
7 documents required · 7 mandatory
₹500
Garrison Engineer (AF) Bareilly
₹70,000
Yes
6 Mar 2023
12 Jan 2023
15 Feb 2023
12 Jan 2023
13 Feb 2023
26 Jan 2023
Amount
Taking out carefully existing motor operated hangar door leaves with steel structure each of approx size 9.2 m X 9.2 m, top rollers & bottom wheels, bottom rails including CGI sheet coverings (without damaging), disconnecting all electrical parts i.e. motor and cable etc. complete with hydraulic crane or other suitable mechanical tools, and manpower and placing the same on leveled ground carefully for carrying out repair/ replacement of damaged sections as detailed here-in-after complete all as specified and directed. Note-(i) T&P required for taking down the door for repair shall be arranged by the contractor at his own and the unit rate quoted shall include the cost thereof. No claim whatsoever on this account shall be entertained. (ii) Replacement of defective steel members, CGI sheets, items shall be measured and paid against respective items of this schedule.
M&L in repairs for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde-E-250) Quality A, as in existing main horizontal/ vertical sections, bracings, plate at bottom for wheel fixing of MS framed structure of hanger's doors, other connecting plates and welding wherever required after making them perfectly straight and aligned and complete all as specified and directed.
M&L in repairs for mild steel tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe- 290 Gde-E-165 complete all as specified and directed.
Demolition of cement Concrete in ground floors and pavings, any thickness including taking out embedded steel rails and associated members, (below or above ground level), by diamond cutter and breaking by mechanical tools including removing demolished spoils exc 1.5 Km but n.exc 5 Km and depositing where ever required complete all as specified and directed.
M&L in repairs for rolled mild steel sections for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, drilling holes for anchor bolts etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of standard sleeper of ISMC 150 (channeled sleepers Fe 410-W (Gde-E-250, Quality A) & J- bolt of dia 12mm. 450mm length shall be fixed on sleeper to align it on floor, to support the rails of hangar door wheel on it after making them perfectly straight/ leveled/ aligned and checked with laser leveling instrument, inclusive of J-bolts complete all as specified and directed.
S&F in repairs Standard rails (30/ 50 lb) or equivalent section including stoppers at specified locations to restrict further movement of doors, fixed on sleeper of ISMC 150 @ distance 750mm (channeled sleepers shall be measured and paid for in relevant items) to support the hangar door wheels on it after making them perfectly straight and checked with laser leveling instrument, and J- bolt of dia 12mm. 450mm length shall be fixed on sleeper to align it on floor and complete all as specified and directed
S&F in repair set of two roller wheel assembly (bottom wheels:- one roller wheel shall be fitted with sprocket for motorization arrangement and another without sprocket to each leaf including nut bolts, connecting plates etc) for movement on bottom rail with each effective force of 100 Kgf at 1.6 m height from the floor. The bottom wheel shall be of adequate strength to sustain the load of door leaf, made of high tensile steel machined with high precession, double flanged ( 18mm flange) fitted with heat resistant maintenance free self lubricating sealed bearings. The wheel diameter shall not be less than 300 mm & the shaft diameter shall not be less than 40mm guide channels and 2 Nos. two wheel assembly for bottom support suitable to enable movement of each shutter by application of 100 Kgf of force at 1.6m height from the floor. Bottom wheel shall be designed to take all the load of door leaf in motion/ High wind pressure and to protect the door leaf from de-railing the rail complete all as specified and directed. Note :- Make & quality as approved by GE
S&F in repair set of two roller assembly (one at each support) for top support of each door leaf to move in guide channels at top guide. The top wheel shall be made of high tensile steel, machined with high precision fitted with heat resistant maintenance free self lubricating sealed bearings. the wheel diameter shall not be less than 150 mm & the shaft dia shall not be less than 40mm. Top wheel shall be designed to take all load in motion / high wind pressure and to protect the door leaf from de-railing / falling of guide complete all as specified and directed. Note :- Make & quality as approved by GE.
M&L for plain cement concrete 1:1½:3, Type A1 (using 20mm graded stone aggregates) in pavement/ hard-standing of any thickness and finishing surface of concrete by brooming complete all as specified and directed.
M&L for forming construction joint 30mm deep X 10mm wide by cutting with diamond cutter and filled with Grade 'B' sealing compound complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness as in roof covering, door cladding/ covering etc complete all as specified and directed.
S&F 0.63mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap having zinc coating @ 275 gram per sq.m inclusive of both sides, fixed with L-type or J-type or cranked hook bolts, as in roof, walls, door cladding/ covering etc. complete all as specified and directed.
Fixing only galvanized corrugated iron (CGI) sheeting, any thickness (old serviceable sheets shall be used) with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts, as in roof, walls etc. complete all as specified and directed.
S&F in repair 0.8 mm thick Plain, galvanized, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings, funnels (length and girth as fixed) with grade of zinc coating 275, Joints sealed to make it leak proof by suitable sealing compound and fixed and connect with SWR pipe where ever required and complete all as specified and directed.
Refixing of hangar door leaf in the same opening (each of approx leaf size 9.2m x 9.2m) including straightening of displaced/ distorted steel members and fixing the same by welding in the correct position/ true to alignment as required, replacement of worn out nut and bolts, repair of welded joints wherever required etc. including installation of motorization arrangement, connecting chains, cables complete using hydraulic crane or other suitable mechanical tools & necessary scaffolding; for smooth functioning of door in all respects to the user's satisfaction complete all as specified and directed. Note-(i) Replacing of MS structural members, PGI & CGI sheets covering shall be measured and paid for under relevant items of this schedule. (ii) T&P required for refixing of hangar door leaves shall be arranged by the contractor at his own and the unit rate quoted shall include for the cost thereof and no claim whatsoever on this account shall be entertained.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint of olive green colour as base coat and making camouflage pattern as approved by the GE by applying two more coats of different coloured patches in different shapes as directed complete over a coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L for complete removal of existing old paint from steel surfaces by paint removers or burning off with blow lamps, cleaning the surfaces with scrappers and applying two coats of synthetic enamel paint of olive green colour as base coat and making camouflage pattern by applying two more coats of different coloured patches in different shapes as directed complete over a coat of red oxide zinc chrome primer complete all as specified and as directed
Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
M&L for rendering 15mm thick in CM (1:4) on concrete/ brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of old decorated surfaces of walls and cornices by booming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
Taking down chowkats or frames with shutters (with out taking off shutters from frames) exc. 1.5sq.m. but n. exc. 4sq.m. each all as specified.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: Butt hinges and necessary screws shall be paid separately)
M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified
S&F 100mm long cold rolled MS butt hinges medium weight.
S&F aluminium handle 150mm long cast type anodized all as specified.
S&F 150mm extruded aluminium alloy tower bolts extruded sections anodized complete all as specified and as directed.
S&F 300mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
Carrying out preventive maintenance of heavy duty electrically operated Hangar gate of size 9.20m X 9.20m, to make it in serviceable condition round the clock along with complete servicing of the mechanism of door at an interval of every week or as and when at urgent requirement basis for full contract period, for Remote / Manual operated Gate comprising of motor, gear box, chain, contactor, relay, hooter, timer and control panel etc., installed at main panel of the gate with and including dismantling and replacement of all unserviceable parts of Gear box, motor and panel with new parts at its installed locations complete all as specified and directed. [Note: Cost of Oiling, Greasing and labour charge for the replacement of various spare parts shall be deemed to be included in the unit rate of this item. Supply only Spare parts shall be measured and paid separately under respective items of this schedule]
Supply only following spare parts and accessories of Hangar Gate having same specifications of existing spare complete all as directed:
Supply only 4 core, 2.50 Sq.mm size flexible copper conductor cable, PVC insulated and sheathed, 1100 volts grade multi-stranded run on box girder between control panel to all motors for hangar door complete all as specified.
Supply only 4 core, 4.00 Sq.mm size flexible copper conductor cable, PVC insulated and sheathed, 1100 volts grade multi-stranded run on box girder between control panel to all motors for hangar door complete all as specified.
Teeth gear of chain required for operating Hangar Gate.
Chain of teeth gear required for operating Hangar Gate.
Drive End Ball bearing and Non Drive End Ball bearing No. 6205 suitable for 3 phase induction motor, 1.5 KW, AC.
MCB TP 20 Amp, 'C' curve. [Make: Siemens/ Indo Asian/ ABB]
Motor protection circuit Breaker switch, 415 volts suitable for 3 phase 1.5 KW induction motor with thermal protection adjusting range 2.5-4.0. [Make: Siemens/ Indo Asian/ ABB]
MCB SP 240 V, 6-32 Amp, 'C' curve. [Make: Siemens/ Indo Asian/ ABB]
MCB TPN 415 V, 40 - 63 Amp, 'C' curve. [Make: Siemens/ Indo Asian/ ABB]
Supply only Triple pole contactor, 3 phase, 20 Amp with coil complete all as specified. (Make: L&T/ Siemens/ Schneider).
Mini contactor AC, 3 pole up to 6 Amp, 415 volts, 50 Hz. [Make: Siemens/ Indo Asian/ ABB]
Supply only geared rotary limit switch 3 phase, 415 volts, 50 Hz, 10 Amp, No. 22-1210-2 KV suitable for hangar door of any size and any motion complete all as specified. (Make: Sterling Control/ Speed-O-Control).
M&L for carrying out repair/ replacement of existing motor starter of any rating/ type including replacement old unserviceable parts like push button, contactor, control device and other connected accessories complete all as specified and directed.
M&L for sub main wiring concealed complete with two runs of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. with one run of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade as earth continuity conductor all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]
Cutting and removing old unserviceable/ burnt winding wire and M&L for rewinding the stator of 3 phase, 1.5 KW, AC motor using super enameled copper wire as per existing size with and including varnishing thereof and insulation of class "F" complete all as specified and directed.
Cutting and removing old unserviceable/ burnt winding wire and M&L for rewinding of F100 rotor of 3 phase, 1.5 KW, AC motor using super enameled copper wire as per existing size with and including varnishing thereof and insulation of class "F" complete all as specified and directed.
Kapoor Contractor and supplier
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .