Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-AOC ARABINDANAGAR ALIPURDUAR COURT | ₹5.0 L | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹5.0 LRejected-Finance 4307 N A RAHARA BARRACKPORE NORTH 24 PARGANAS WEST BENGAL PIN 700119 | BARRACKPORE | NORTH 24 PARGANAS | WEST BENGAL | 700119 | ₹5.0 L | L2 | Rejected-Finance Unsuccessful |
| 3 | L3₹5.2 LRejected-Finance 52 B MUKTAPUKUR NATUN PALLY 24 PGS N PIN 700123 | NORTH 24 PGS | WEST BENGAL | 700123 | ₹5.2 L | L3 | Rejected-Finance Unsuccessful |
| 4 | Rejected-Technical PATULIYA BAISHNAB BAGAN PATULIYA KHARDAH NORTH 24 PARGANAS 700056 | KHARDAH | NORTH 24 PARGANAS | WEST BENGAL | 700056 | - | - | Rejected-Technical Non-eligible |
Tender Value
₹5.0 L
EMD Value
₹9,948
Closing Date
28 Feb 2026, 2:00 pmClosed
EXECUTIVE ENGINEER BARASAT HIGHWAY DIVISION NO. II
OFFICE OF THE EXECUTIVE ENGINEER BARASAT HIGHWAY DIVISION NO. II P.W. (ROADS) DIRECTORATE 123, Jessore Road, Champadali, Barasat, North 24 Parganas, Kolkata-700 124
Renovation work in different rooms at the office of the Executive Engineer of Barasat Highway Division-II, PW (Roads) Dte during the year 2025-2026
2026_WBPWD_1009980_1
WBPWD/PWRD/BHD II/NIT-35e/25-26
Open Tender
CIVIL WORKS
30 days
Barasat
Please refer Tender documents.
5 documents required · 5 mandatory
₹9,948
9 Mar 2026
18 Feb 2026
2 Mar 2026
18 Feb 2026
28 Feb 2026
23 Feb 2026
Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film.Natural white . b) For unsupported length of vertical member above 1.50m. height of both ends of vertical member restrained but panel above 0.90 sqm[Note : for estimate purpose construction wing may consider weight of Al-Sections for Partition wall @ 5.0 Kg per Sq.M]
Providing and fixing exterior quality Aluminium Composit Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials ( but excluding the cost of silicon sealant), labour, scaffolding and all other incidental charges e.g. VAT, Labour cess etc. complete in all respect as per specification and direction of Engineer-in-charge. ( Mode of payment is on finished surface area of ACP) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating)
Partition of teak veneer [1 mm] as per design fitted and fixed complete (excluding the supporting frame work & necessary teak wood battens):(i) 4mm thick commercial quality
Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval anddirection of Engineer-in-Charge. [excluding the cost of supporting frame workand teak wood batten/Lipping] In Ground Floor .
Polyurethane Polishing to woodwork with required colour as approved by Engineer-in-Charge with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner,Spirit etc. and inclusive of all operation, material and labour complete as per direction of Engineer-in- Charge
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.xi) 12mm thick clear glass.
Door stopper.(Brass)
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(v) 150mm long x 12mm dia. bolt
Supplying 'Godrej' mortice lock chromium plated with keys 6-levers including fitting & fixing complete.
Godrej Hydraulic door closer fitted and fixed complete. Heavy type.
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium slidingWindowofallAluminiumsectionsviz.windowframe(top,bottom&side frame), shutter (top, bottom, side & interlock member) made of aluminiumalloyextrusionsconformingtoIS733-1983&IS1285-1975,annodised conforming toIS1868-1983, fittedwithall otheraccessories viz.PVC roller,EPDMgasket,maruti lock, screwsetc.includinglabourcharges for fitting&fixing of aluminium2-track/3-track slidingwindowwith fixingofglass(excludingcostofglass) allcompleteasperarchitectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white For3-ckwindow:[email protected]. [email protected] [email protected].,[email protected] per Mtr. and Interlock member @ 0.612 Kg per Mtr. [Note:forestimatepurposeconstructionwingmayconsiderweightof2 [email protected] window @ 6.5 Kg per Sq.M].
Supplying, fitting and fixing Godrej Multi Lock or equivallent
SUB TOTAL
GST @ 18% over Sl. No. 1 to 12
Labour Welfare Cess @ 1% over Sl. No. 1 to14
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.70 MB
BOQ_2479693.xls
BOQ • 0.37 MB
FORM_2911_split.pdf
Tender Documents • 0.50 MB
Bidders_Check_list.pdf
Additional Documents • 0.21 MB
Download all tender documents and submit your bid