NIT NO. 036/ ENGG/ ELECT/ 2026-27 OF SJDA

Supply and Erection of 7M long Galvanized (BSEN ISO : 1461) Octagonal Pole (A/F- Top: 70mm & A/F Bottom- 130 mm and Sheet Thickness: 3 mm ) with 4 nos M-20 Foundation Bolts (min Base Plate Size: 200mm X 200mm, min. Base Plate Size 12mm, Bolt Length: 700mm and Bolt PCD: 220 mm) on RCC foundation with cement concrete considering actual SBC of soil and as per drawing and design of manufacturer and as per E.I.C etc. as required

1000 mm HDG Single Arm Bracket made of (48.3 ODx2.9 thik.) Mild Steel Pipe as per IS:1239 suitable to insert at Pole Top A/F 70

1000 mm HDG Double Arm Bracket made of (48.3 ODx2.9 thik.) Mild Steel Pipe as per IS:1239 suitable to insert at Pole Top A/F 70

Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., uitable to fit in up to 65 mm dia pipe, life time (LED, Driver & electrical circuitary ) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/ HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). : 120 Watt

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. : 3 x 1.5 sq. Mm

Supply of 1.1 KV grade XLPE insulated PVC Sheathed Aluminum conductor Armoured Cable 2 core 10 Sq.mm (Conforming to IS - 7098 (Part 1) : 1988).

Supply of 1.1 KV grade XLPE insulated PVC Sheathed Aluminum conductor Armoured Cable 2 core 16 Sq.mm (Conforming to IS - 7098 (Part 1) : 1988).

Supply of 1.1 KV grade XLPE insulated PVC Sheathed Aluminum conductor Armoured Cable 4 core 25 Sq.mm (Conforming to IS - 7098 (Part 1) : 1988).

Supply of 1.1 KV grade XLPE insulated PVC Sheathed Aluminum conductor Armoured Cable 3.5 core 35 Sq.mm (Conforming to IS - 7098 (Part 1) : 1988).

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. : 3.5 C X 35 Sqmm