Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.7 LAccepted-AOC 9 NAROTTAM KUNJ MADHU NAGAR AGRA CANTT 282001 | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC AOC accepted. | |
| 2 | L2₹54.9 L+₹10.1 L (22.7%)Rejected-AOC | L2 | Rejected-AOC AOC rejected. |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
3 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehradun
GE (MES) Dehradun, Garhi Cantt, Mall Road, Tele - 01352750580
Day to Day maintenance of electric complaints at Garhi cantt area under AGE E/M-II of GE Dehradun.
2022_MES_536620_1
8494/A/E8
Open Tender
Civil Works
Item Rate
240 days
GE Dehradun
Class D cat b (i)
8 documents required · 8 mandatory
₹500
GE Dehradun
₹99,800
Yes
14 Nov 2022
8 Jul 2022
6 Aug 2022
8 Jul 2022
3 Aug 2022
22 Jul 2022
Amount
S & F Ball Bearing No 6201-6204 as reqd suitable for ceiling fan of sweep 1200/1400 complete all as specified & directed , Make SKF/NBC/TATA
S & F Down Rod with connecting accessories suitable for ceiling fan of sweep 1200/1400 length 75 cm complete all as specified nd directed
S & F ceiling fan hanging hook clamps (for fixing to ceiling fan rod) made with using GI of suitable size as directed and with heavy duty rubber insulator and two Nos nuts and one bolts including split pin complete all as directed.
S & F sleeves of super quality for winding wire of fans of different size as reqd complete all as specified and directed.
S & F split pin of reqd size for ceiling fans complete all as specified and directed.
S & F heavy duty rubber insulator for 1200/1400 mm sweep for hanging ceiling fan.complete all as specified and directed
S & F capacitor 2.5 to 3.15 MFD as per existing capacity of 240 volts AC complete all as specified and directed.Make EPCOS/Havells/L&T
S & F heating element any type as per site requirement of capacity 2 KW (Traingular/cup/box type as reqd) ISI Marked complete all as specified and directed.. Make-Newton/Theta/Dashmesh.
S & F thermostat for geyser as per site requirement temp setting on 60 degree Centigrade ISI Marked complete all as specified. Make : Newton/Theta/Bajaj
S & F LED indication lamp Green/Red as reqd suaitable for Water Storage Geyser complete all as specified & directed.
S & F fusible plug made out of brass and lead as per existing make and size complete all as directed.
S & F flange assembly (Siphon) for 25 ltrs capacity of geyser and any type of hole (6 no) all complete with safety valves as per existing make & size as per size requirement complete all as specified & directed
S & F PVC flexible connection Nylon braided with suitable threaded check nut & washer complete suitable for hot & cold water 15mm dia along with threaded brass nuts & washers 450 cm long complete all as specified & directed. Make : Prayag/Crompton/Havells
S & F 5 -in-1, 6 Amp,240V, SS Combined unit with box (surface type) with two fixing holes incl fixing rawal plug & screws Make : Anchor/Havells/Legrand
S & F 5 -in-1, 6/16 Amp,240V, SS Combined unit with box (surface type) with four fixing holes incl fixing rawal plug & screws. Make : Anchor/Havells/Legrand
S&F PVC Casing & caping 20mm width , ISI Mark , complete all as specified. Make - polycab,Akg, Kalinga
S & F surface mouting gang box for one switches with two /four holes incl fixing nylone sleeve & screws complete all as specified. Make : Anchor/Havells/Legrandwith 2/4 fixing holes
S & F surface mouting gang box for three switches with two /four holes incl fixing nylone sleeve & screws complete all as specified. Make : Anchor/Havells/Legrandwith 2/4 fixing holes
S & F surface mouting gang box for five switches with two /four holes incl fixing rawal plug & screws complete all as specified. Make : Anchor/Havells/Legrandwith 2/4 fixing holes
S & F Distribution box MCB Protected socket with Plastic enclosure (Surface mounting) 20 Amp MCB DBOXX Combo DP including Plug top all as specified and directed. Make-Havells/Legrand/L&T
S & F Plug Top , 3Pin ,5A with indicator ISI Marked complete all as specified. Make : Legrand/Anchor/Havells
S & F Plug Top , 3Pin ,15 A with indicator, ISI Marked complete all as specified.. Make : Legrand/Anchor/Havells
S& F Metal Plug , 240V,20 A,2P+E suitable for Geyser's DB Enclosure complete all as specified and directed.Make-Legrand/Anchor/Havells
S & F Metal Socket , 240V,20 A,2P+E with blue cap suitable for Geyser's DB Enclosure complete all as specified and directed. Make-Legrand/Anchor/Havells.
S & F PVC conduit medium grade 20 MM dia complete all as specified. Make : Poly cab/AKG/ Supreme
S & F PVC conduit medium grade 25 MM dia complete all as specified. Make : poly cab/AKG/ Supreme
S & F saddle PVC nail type for fixing of PVC batton, complete all as specified.
S & F saddle PVC nail type for fixing of PVC Conduit 20 mm dia, complete all as specified.
S & F saddle PVC nail type for fixing of PVC Conduit 25 mm dia, complete all as specified.
S & F FASTNER 75mm long,8mm dia complete set with nuts & washers complete all as specified and directed
S & F FASTNER , 100 mm long,8mm dia complete set with nuts & washers complete all as specified & directed
S & F nylone sleeve, SIZE 50MM complete all as specified.
S & F nylone sleeve, SIZE 35MM complete all as specified.
S & F Metal Wood Screw , size 50mm complete all as specified.
S & F Metal Wood Screw , size 35mm complete all as specified.
S & F single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor FRLS multistaranded of size 6.00 sqmm complete all as specified.
S & F single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor FRLS multistaranded of size 4 sqmm complete all as specified..
S & F single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor FRLS multistaranded of size 2.5 sqmm complete all as specified..
S & F single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor FRLS multistaranded of size 1.5 sqmm complete all as specified..
S & F 1100 volt heavy duty weather proof cable wiyh PVC insulated stranded aluminium conductor ,served with inner sheathing of PVC tape and overaii PVC Sheathed of size 16 sqmmx 2 core complete all as specified.
S & F 1100 volt heavy duty weather proof cable wiyh PVC insulated stranded aluminium conductor ,served with inner sheathing of PVC tape and overall PVC Sheathed of size 6 sqmmx2core complete all as specified.
S & F 1100 volt heavy duty weather proof cable wiyh PVC insulated stranded aluminium conductor ,served with inner sheathing of PVC tape and overall PVC Sheathed of size 10 Sqmm x 2 core complete all as specified.
S & F PVC flexible wire two core twin twisted of size 23/0.0076 copper conductor complete all as specified and directed.
S & F flexible copper cable , three core of size 40/0.0060 with copper multistranded conductor PVC insulated complete all as specified and directed.
S & F in replacement switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed.
S & F in replacement switch piano flush type single pole two way 230 Volts 6 Amp complete all as directed. Make:- Havells/Anchor/Cona.
S & F in replacement socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete all as specified.
S & F in replacement bell push flush type 5 Amps 230 Volts single pole complete complete all as specified.
S&F in replacement Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified.
S&F in replacement Switch piano flush type, single pole, one way, 230 Volts 15/16 Amps marked with valid CML No. complete all as specified.
S&F in replacement calling bell ding dong type AC 230 Volt single pole complete all as specified.
S&F in replacement stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified.
S&F in replacement ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified.
S&F in replacement anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete complete all as specified.
S&F in replacement wall mounted LED tube light fitting 1x20 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make: Philips cat part No BN 021 C LED 20 S PSU CW GR S2 /Havells ENDURALINEARNEOBS20W LED840SPCWH / Wipro LL20-281-XXX-65AL1 or equivalent in Eveready/ Crompton.
S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete all as specified. Note: The unit rate include for painting to bracket with one coat of red oxide paint and two coat of alluminium paint before fixing.
S&F in replacement LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
S & F Decorative wall light fixture made up of cast aluminium body polycarbonate diffuser, suitable for 15 Watts LED Lamp incl one LED New Odore 10W E27 WW Ball Lamp Lumen output 835 (lm) 3000K complete all as specified and directed by Engineer-in-charge. Make : Havells (City-1) cat part No LHDL02160099 (Fitting) LHLDERHEMD8X010(Lamp) /Mepro cat no AL-170 or equivalent in Eveready / Crompton.
S&F in replacement of LED tube rod 18/20 Watts single or double sided connections complete incl making connection alteration in existing tube light fitting complete Make Havells LHLDEFXD5L8R020 or eqvt in Philips/CG/Eveready.
S&F in replacement mirror light decorative compact luminaries with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.
S&F in replacement 8/10 Watts LED Bulk head light fitting die cast alluminum body and defused glass cover complete complete all as specified. Make :- Eveready/Wipro/Philips.
S & F in replacement fully diffused recessed mounted 2'x2' LED luminaire with UGR<19, for Full Glow Office Complaint indoor spaces, LED 36 Watt ,6500K in White & gray housing with profiled & flat diffuser all as specified and directed by Engineer-in-charge.Make : Philips cat no RC 380B LED36S-6500G4L60W60PSUODOC OR Equivalent in wipro/Havells/Eveready/ Crompton
S&F in replacement metal box of thickness 1.3 mm and of size 7 x 4 inch including making good the disturbed surface as specified and directed by Engr in Charge.
S&F in replacement metal box of thickness 1.3 mm and of size 8 x 5 inch including making good the disturbed surface as specified and directed by Engr in Charge..
S&F in replacement metal box of thickness 1.3 mm and of size 4 x 4 inch including making good the disturbed surface as specified and directed by Engr in Charge.
S&F in replacement metal box of thickness 1.3 mm and of size 8 x 10 inch including making good the disturbed surface as specified and directed by Engr in Charge.
S&F in replacement white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 8 x 5 inch.
S&F in replacement white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 9 x 6 inch.
S&F in replacement white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 5 x 5 inch.
S&F in replacement white hylam sheet of thickness 1.3 mm for mounting swithces sockets of size 8 x 11 inch.
S&F in replacement modular metal fush box of thickness 1.0 mm suitable for 12 modules 2 row.
S&F in replacement modular metal fush box of thickness 1.0 mm suitable for 8 modules 2 row including making good the disturbed surface as specified and directed by Engr in Charge.
S&F in replacement modular metal fush box of thickness 1.0 mm suitable for 6 modules including making good the disturbed surface as specified and directed by Engr in Charge.
S&F in replacement modular metal fush box of thickness 1.0 mm suitable for 3 modules including making good the disturbed surface as specified and directed by Engr in Charge.
S&F in replacement modular metal fush box of thickness 1.0 mm suitable for 2/1 modules including making good the disturbed surface as specified and directed by Engr in Charge.
S&F in replacement decorative polycarbonate modular white frame for fixing of switches and cover plate suitable for 12 modules 3 row and blanking plate if any required for spare module. Make :- Anchor Roma/Cona/Havells or as per site requirement.
All as per item No 76 here -in- above but 8 module single or double row as per site requirement complete all as directed by Engr incharge. Make :- Anchor Roma/Cona/Havells or as per site requirement.
All as per item No 76 here -in-above but 6 module complete all as specified. Make :- Anchor Roma/Cona/Havells or as per site requirement.
All as per item No 76 here -in-above but 3 module complete all as specified. Make :- Anchor Roma/Cona/Havells or as per site requirement.
All as per item No 76 here -in-above but 1 or 2 module complete all as specified. Make :- Anchor Roma/Cona/Havells or as per site requirement.
S&F in replacement Modular switch 1 way 06 amp single pole complete all as specified.. Make :- Anchor Roma/Cona/Havells or as per site requirement.
S&F S&F in replacement Modular switch 2 way 06 amp single pole complete all as specified.. Make :- Anchor Roma/Cona/Havells or as per site requirement.
S&F in replacement Modular switch 1 way 16 amp single pole complete all as specified.. Make :- Anchor Roma/Cona/Havells or as per site requirement.
S&F in replacement Modular socket outlet 6/16A- 5 pin combined of 02 module complete all as specified. Make :- Anchor Roma/Cona/Havells or as per site requirement.
S&F in replacement modular socket outlet 6A-5 pin combined of 02 module complete all as specified.. Make :- Anchor Roma/Cona/Havells or as per site requirement.
S&F in replacement moduar bell push 6 Amp 1 module complete all as specified. Make :- Anchor Roma/Cona/Havells or as per site requirement.
S&F in replacement modular fan step regulator 120 W-2 module complete all as specified. Make :- Anchor Roma/Cona/Havells or as per site requirement.
M&L for sub main wiring in replacement with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 6 Sq mm as current carrying conductor and one run of 6 Sq mm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified incl taking down old u/s sub main. Note:- Three runs of wire and one run of pipe shall be measured as one meter only for payment purpose.
M&L Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 63/100 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s DB of any type complete all as specified. Note:- DB and MCCB/MCB shall be of same make
S&F in replacement Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection. Note:- DB and MCCB/MCB shall be of same make Make :- Legrand/C&S/ABB.
S&F in replacement Distribution board SPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection. Note:- DB and MCCB/MCB shall be of same make Make :- Legrand/C&S/ABB.
S & F in repair MCCB 415 Volt, 15 KA, 4 pole 63 Amp, thermal magnetic type,1CS=100% ICS all as specified and directed.
S & F in repair MCCB 415 Volt, 15 KA, 4 pole 100 Amp thermal magnetic type 1CS=100% ICS all as specified and directed.
S & F in repair MCCB 415 Volt, 36 KA, 4 pole 200 Amp ,Adjustable type 1CS=100% ICS all as specified and directed.
S & F in repair MCCB 415 Volt, 36 KA, 4 pole 400Amp ,Adjustable type 1CS=100% ICS all as specified and directed.
S & F in repair MCB ,single pole 240 Volt, C curve 10 KA ISI Marked 5 to 32 Amps all as specified and directed.
S & F in repair MCB, SPN, 240 Volt, C curve 10 KA ISI Marked , 20-25 Amps in existing DBs all as specified and directed.
S & F in repair MCB ,SP,240 Volt, C curve 10 KA ISI Marked ,40 Amps all as specified and directed.
S & F in repair MCB ,DP, 240 Volt, C curve 10 KA ISI Marked , 32 Amps all as specified and directed.
S & F in repair MCB ,DP, 240 Volt, C curve 10 KA ISI Marked , 40Amps all as specified and directed.
S & F in repair MCB ,TPN,415 Volt, C curve 10 KA ISI Marked ,63Amps all as specified and directed.
S&F in replacement Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 10 KA C series complete all as specrified & directed.
S&F in replacement tamper proof single phase electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH including cable connection, proper sealing with barcode with PVC seal. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure /L&T/BHEL (Note:- Old unserviceable meter will be deposited to E/M store yard)
S&F in replacement tamper proof three phase electronic meters temper proof LCD display with polycarbonate cover 415 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH including cable connection, proper sealing with barcode with PVC seal. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure /L&T/BHEL (Note:- Old unserviceable meter will be deposited to E/M store yard)
S&F in replacement PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified.
S&F in replacement PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified..
S&F in replacement PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm and 50 mm deep complete all as specified..
S&F in replacement PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified..
S&F in replacement PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 350 mm x 300 mm and 50 mm deep complete all as specified..
S&F in replacement super quality white flexible PVC pipe of 25 mm dia, ISI Mark complete all as specified.
S&F PVC Casing & caping 25mm width , ISI Mark , complete all as specified. Make ; polycab,Akg,Kalinga
S&F in replacement wooden screw 25 mm long complete all as specified.
S&F in replacement Brass machine screw of size 1 inch long complete all as specified.
S&F in replacement Brass screw of sice 2 inch long complete all as specified.
S&F in replacement Brass screw of sice 4 inch long complete all as specified.
S&F in replacement Canopy for ceiling fans complete all as specified.
S&F in replacement boxes junctions, plastic, round, four terminals complete all as specified.
S&F in replacement boxes PVC round plate to cover the opening complete all as specified.
S&F in replacement aluminium thumble lugs of size 10Sqmmx2 core armoured alum conductor UG cable complete all as specified.
S&F in replacement aluminium thumble lugs of size 16Sqmmx4 core armoured alum conductor UG cable complete all as specified.
S&F in replacement aluminium thumble lugs of size 35Sqmmx3,5 core armoured alum conductor UG cable complete all as specified.
S&F in replacement aluminium thumble lugs of size 50 Sqmmx3.5 core armoured alum conductor UG cable complete all as specified.
S&F in replacement aluminium thumble lugs of size 95 Sqmmx3.5 core armoured alum conductor UG cable complete all as specified.
S&F in replacement aluminium thumble lugs of size 120Sqmmx3.5 core armoured alum conductor UG cable complete all as specified.
S&F in replacement aluminium thumble lugs of size 185 Sqmmx3.5 core armoured alum conductor UG cable complete all as specified.
S&F in replacement aluminium thumble lugs of size 240 Sqmmx3.5 core armoured alum conductor UG cable complete all as specified.
S&F in replacement aluminium thumble lugs of size 300 Sqmmx3.5 core armoured alum conductor UG cable complete all as specified.
S&F PVC insulation tap of width 20 mm and length 10 Mtr complete all as specified.
S & F in replacement of off load Change over switch with enclosure 4 Pole, 63 Amps, 415 V , complete all as specifiec and directed.make: Havells/C&S/L&T
S & F in replacement of off load Change over switch with enclosure 4 Pole, 100 Amps, 415 V , complete all as specifiec and directed..make: Havells/C&S/L&T
S & F in replacement of off load Change over switch with enclosure 4 Pole, 200 Amps, 415 V , complete all as specifiec and directed..make: Havells/C&S/L&T
S&F in replacement Decorative Gate light made up of high grade unbreakable polycarbonate materials incl LED Lamp B22 base up to 1nox20 W LED lamp ,mounting pole dia -60mm(Max) OD incl fixing arrangements complete all as specified & directed
S&F in replacement Industrial light fittings,70 Watt with Eco well glass in PDC housing with luminaire efficiency of 110 Lm/W, Superior tampered fin design with fin design with exceptional thermal management , ingress protection of IP 66 complete all as specified and directed. Make : Crompton greaves model no Supra neo -II(T) ,Cat pt No TIP -311-70-57-SL-CP-NSG or Equivalent in Philips/Havells/Eveready
M&L for sub main wiring in replacement with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 4 Sq mm as current carrying conductor and one run of 4Sq mm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified incl taking down old u/s sub main. Note:- Three runs of wire and one run of pipe shall be measured as one meter only for payment purpose.
S&F in replacement Meter Distribution board made out of Thermoplastic polycarbonate of size 600x600x170 mm (dust proof & weather proof ,Shock proof, rust proof ,corrosion free ,acid & Chemical resistance ,UV resistance , Halogen free & freerecyclable material) wiyh 230v Ac 50 HZ 3 Wire , Gasket shallbe embedded with T-locking arrangement and suitable for mounting of Electronic Meter -04/6 Nos incuding electrical connection with existing system and sealing properly & taking out u/s broken/rusted box of any size and type complete all as specified and directed. Make Hensel cat part no Mi0800 / Secure/Sintex
Supply and fixing in replacement of Busbar chamber of size 600x315x214 mm or higher size with PVC hinged lid suitable for and mounting arrangement for fixing of MCCB 4 pole, 100/125 Amps 25 KA (Icu=100%Ics) 415 Volt,50 Hz, duly connected with and incl 04 Nos of copper Busbar 300 Amps fixed on epoxy insulators, Gun metal cable gland of 25 Sqmm 01 No and PVC coupler for sub main wires 04 Nos complete Polycarbonate type (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free recyclable material), UV resistant, having high grade gasket made of Polyurethane, flame retardant,complete all as directed at site by Engr in charge or his rep complete. Note:- Only MCCB shall be measured and paid for seperately all other items incl connection from MCCB to busbar with suitable size copper wire incl thimble, bottle lugs etc are incl in item rate. Make:- Hensel cat No Mi 9410 or ABB/SINTEX/Universal/Schneider
S&F in replacement of Surface mounted general purpose square shaped luminare with low height CRCA housing and high transmitivity diffuser suitable for office application,LED 32 watt,6500K in White & gray housing with profiled & flat diffuser all as specified and directed by Engineer-in-charge Make : Philips cat no SM365C LED32-6500PSUODGR/WH OR Equivalent in wipro/Havells /Eveready/Crompton
S&F in replacement LED Flood lights,120 Watt, 5700K for area lighting applications made with single piece pressure die cast aluminium housing with dedicated zig zag heat sink provides better thermal performance. LEDs with secondry optics with better light distribution and control , IP 66 degree of protection & impact resistance of IK-07 and integrated driver with 5KV 710KV external surge protection including suitable fixing arrangements complete all as directed by Engr-in-charge Make : Eveready cat no LEDFL12015-04 OR Equivalent in Havells/Philips/Crompton
S&F in replacement LED Post Top ,45 Watt,3000K for gate lights,pathways,garden and promenades with spun aluminium housing and pressure dia-cast spigot. Clear acrylic for uniform btight light with IP 65 degree of protection including suitable fixing arrangements complete all as directed by Engr-in-charge MAKE : Eveready cat no LEDPOST 04513-01 OR Equivalent in Havells/Philips/Crompton
S& F in replacement LED bush light ,9 Watt, 3000K made with single piece pressure die-cast aluminium housing and ip 65 degree of protection suitable for outdoor applicatios like garden,tree uplighting including suitable fixing arrangements complete all as directed by Engr-in-charge MAKE : Eveready cat no LEDH009i-01 OR Equivalent in Havells/Philips
S& F in replacement LED focus light,9 Watt,3000K made with single piece pressure die-cast aluminium housing and ip 65 degree of protection for application of any angle used for focus to study in bed room including suitable fixing arrangements complete all as directed by Engr-in-charge .
M&L for attending no supply in the blocks/qtrs/lines/offices in the OTM/Md Accn due to any reason like MCBs/MCCBs burnt out/tripping, leakage fault, short/open circuit faults, electric fittings/fixtures, all type of controls, controls of garden/street lights, controls of summer and cooling appliances with rectification and restoring the no supply by trained person complete all as specified for the following areas:-
RIMC AREA,Young Road,IB,DSOI,officers md accn (Approximate 6KM &back)
Mall Road,talwar lines,mes offices,UK sub area,mes civ md accn,fafa md accn( Approximate 6KM &back)
Anarwala OTM/Md Accn Area (3 PUNJAB, 5 Gdr, 127 EME, 414 Fd Hosp, 447 ASC incl Md Accn of MAP Qtrs, FAFA Qtrs, Pump Houses) (Approximate area 4 Km & Back
MH Area OTM/Md Accn Area (CMP Unit, 314 Fd Wksp, 127 TA Bn). (Approximate 2 Km & Back).
Beacher Road/SP Road/12 Garh/501 FSEG/Cheer Bagh (Md Accn). (Approximate 8 Km & Back) Notes :- (a) All T&P and safety tools required to above job are included in the unit rate. (b) Unit rates also include the conveyance and communication faicility is requried the complete the job. (c) Unit rates also include 1 electrician (SK) each and 1electrician helper each (SSK) at three places in two shifts i.e 6 AM to 2 PM and 2 PM to 10 PM including sunday & holidays from the date of commencement of work as fault rectification. (d) Electrician party should have ITI passed with two year experience or five year experience for SSK(helper) in electrical field and sound knowledge,experience in internal electrification/LT sysyem/Street lights/fansgeysers as directed by Engr-in-Charge. (e) if any complaint attended by contractor with in 24 hrs ,he will be liable for penalety /recovery of Rs 100 per complaint . Amount will be deducted from running payments/final bills. (f) the complaint register,complaint slipsfor each area/zone ,materials issue register for each coplaint slips will be maintain by the contractor or rep/supervisor and daily produced all documrnts to the JE/MCM & AGE E/M (g) Materials will provided by the contractor through this contract & neccessary unser or replaced items/unused ser items deposited back to complaint cell . unser/replaced items will be credidited in the Sch of credit items. (h) Scan copy of EPF,ESIC will be provided by the contractor before deployment of the employees. (j) Rate for providing the outsourcing person will not quoted separately, shall be included in relevant item in schedule. (k) Necessary documents will be provided by contractor at their end.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .