Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.8 LAccepted-AOC 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L1 | Accepted-AOC Lowest quoted bidder. | |
| 2 | L2₹30.4 L+₹1.2 L (4.00%)Rejected-Finance CANTT ROAD KASHNI BIN PITHORAGARH UTTARAKHAND 262520 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262520 | L2 | Rejected-Finance Highest quoted bidder. | |
| 3 | L3₹31.0 L+₹1.7 L (5.94%)Rejected-Finance | L3 | Rejected-Finance Highest quoted bidder. | |
| 4 | L4₹31.3 L+₹2.0 L (6.99%)Rejected-Finance | L4 | Rejected-Finance Highest quoted bidder. | |
| 5 | L5₹31.8 L+₹2.5 L (8.71%)Rejected-Finance | L5 | Rejected-Finance Highest quoted bidder. |
Tender Value
₹32.5 L
EMD Value
₹65,000
Closing Date
30 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Pithoragarh
GE Pithoragarh Post Bharkatia Pithoragarh ( UK)PIN-262520
SPL REP TO BLDG NO P-6/2 AND PROVN OF STORE ROOM (APPROX 10 MTR X 5 MTR) NEAR BLDG NO P-21/01 (OR COOK HOUSE) AT SIG COY AT MIL STN PITHORAGARH.
2022_MES_542699_1
8488/PGH/E8
Open Tender
Civil Works
Item Rate
180 days
GE Pithoragarh
Class D, category a(i)
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹65,000
Yes
11 Oct 2022
2 Aug 2022
6 Sept 2022
2 Aug 2022
30 Aug 2022
16 Aug 2022
Amount
DESCRIPTION OF ITEMS
Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed
Demolition of reinforced cement concrete in any position complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.
Taking down chowkats or frames but with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each.
M&L for 100 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base of floors etc, complete all as specified and directed.
M&L for Providing cement concrete 25 mm thick type B-0 (1:2:4) using 12.5 mm graded agg asin floor finishing cement concrete surface even and smooth w/o usinng extra cement .
M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match and including Dismantling of existing floor ,hearth or wall tiling complete all as specified and directed
M & L, glazed coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match and including Dismantling of existing floor ,hearth or wall tiling complete all as specified and directed.
S&f Solid PVC wall lining consistinng of 5mm thick single side prelam PVC sheet used instead of plain colour sheet fixing at site on PVC Frame as per specifications and drawing complet all as specified .
S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed.
M&L for 5 mm thick rendering in CM 1:3 on ceiling, soffits, chajja projection etc complete all as specified and directed.
. -ditto- as ier item no 13 but in cm 1:4 (external surfaces)
M&L for two coats of exterior emulsion paint (weather coat, anti dust of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface over newly plastered surface of wall complete all as specified and as directed.
M&L for two coats of exterior emulsion paint (weather coat,anti dust of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface after complete removal of existing treatement complete all as specified and as directed.
Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 2 mm) complete all as specified and directed.
Preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 2 mm) complete all as specified and directed.
Preparing of plastered or unplastered old decorated surfaces of walls by complete removal of existing treatment, moulds, moss and efflorescent salt and treating oil and greasy spots and applying three coat of white wash on walls including cornices etc complete all as specified and directed
Preparation of New plastered surfaces of ceiling and applying Three coat of white wash on ceiling including cornices etc complete all as specified and directed.
Preparation of plastered or unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soots, treating oily/greasy spots, moss and efflorescence and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed.
M&L for RCC (Nominal mix)Type 1:24 type B-1 using 20mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors,roofs,chajja, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed.
M&L for TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed.
Dismantling wrough iron or mild steel work of any description not otherwise provided .
M&L, preparing old previously treated surface of wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on old decorated wooden surfaces, complete all as specified and directed.
S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed .
S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.
S&F standard aluminium section powder coated any colour as approved for window frames/shutters sliding/ partitions etc including jointing cleat and rubber eading/linning, Pivot ,locking aragement and all hardware etc and fixed in position with stainless steel screws all as specified and as directed.
S&F anodized aluminium door & frame powder coating (minimum thickness of powder coating 50 micron) incl 5.50mm thick tinted glass, fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No floor spring for each shutter complete all as specified and directed with following specifications :- (a) Aluminium door frame =101.50x44.45mm (b) Aluminium style/top & middle rails of shutter=83.5x44.45mm (c ) Aluminium bottom rail of shutter=114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.
S&F in glass 5 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified
S&F in glass 5 mm thick ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified
S&F Toughned glass 10mm thickness for partitions,self and similar work including cutting to shape ,drilling holes,bracket,fastners as required in position complete all as specified and directed.
S&F 24 mm thick factory made solid PVC flush Kitchen CB shutter /shutter ,PVC ,made from co-extruded three layer rigid foam sheet (single extruded process ) with 0.8 to 1mm thick outer face layer having density not less than 1400 kg /cum and density of central core material not less 600 kg/cum , manufactured by an ISO 9001:2015 certified company and fixing in frame at site with and including 03 nos S S hings, 02 Nos S S fancy handle ,02 Nos S S tower bolt, Ball catches with 8mm dai steel ball and brass body and striding plate including letting and inbuilt lockin divice with Key etc for Cup Board / Kitchen cabinets as per specification & drawing complete all as specified and directed Engr-in-charge.
M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L, preparation old previously treated steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on the steel surfaces, complete all as specified and directed.
M&L for rubber moulded Exterior grade joint less coloured tiles 10 mm thick ,area exc 0.06 sqm but n.exc 0.38 sqm with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 15mm thick screed bed in CM 1:6 and taking down of existing completee all as specified and as directed.
Dismantling timber scantlings 40 sq cm and over in section in any position in framed work .
S&F second class hard wood in scantlings in timber framed work complete all as specifiection
M&L for preparing surfaces of wood and wood based materilals new or old of any otherwise described and treated with row linseed oil completee all as specified and as directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F 0.63 mm thickness Galvanised corruated mild steel sheeting side lap fixed with coach screws and washers with L-type or j type or cranked hook bolts in lieu of screws in roof ,walls etc with grade of zinc coating 275.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding, in ridges, hips, valley gutters, drip and straight flashings to wall, fixed with self tapping screws as specified.
Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed.
Supply & Fix GI powder coated snap grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 4mm dia GI wire suspender of suitable length complete all as specified and as directed :- (i) main tee of size -32mmx24mmx0.3mm (ii) cross tee of size -26mmx24mmx0.3mm (iii) wall angle - 24mmx24mmx0.3mm
S & F 4 mm thick E-Board classic for, 595 x 595 mm size fixed with staples on snap grid as in ceiling complete all as specified and as directed.
S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.
All as per item No 47 above but except material complete all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finisheed even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction.
Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed.
M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .
M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work complete all as specified and as directed.
S&F plain aluminium sheeting 0.56mm thick , alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing ( length and girth as fixed). complete all as specified and directed.
M & L for GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc. in walls , ceilings, stanchions, beams, etc. including all laps , cutting and waste complete all as specified and directed.
S&F in repair 20mm to 25mm thick Hard wood 2nd class weather boarding clean sawn and rebated on thick edge to give 25 mm laps and wrought both side and edges shot and chamfered fixed to roof hight of bldgs complete all as specified and directed .
S& F in repair Granite (of any type) work (table rubbed and polished) 20mm thick in steps jambs,pillars, window cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete.
S&F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.
S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementsuppling & fixing in the frame at site as per specification & drawings.
S & F Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type B-22 and complete all as specified and as directed.
S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified
S& F 125 mm extruded aluminum alloy handles, fabricated type anodised.
S&F 250mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy ,complete all as specified and directed.
M & L for chequered cement concrete coloured tiles rubber moulded decorative designed, size of tiles as approved, with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over 20 mm thick screed bed,incl and over 100mm thick PCC 1:2:4 complete all as specified and as directed.
Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.
S&F in repair 15mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
S&F in repair 20mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
S&F in repair 20 mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.
S&Fin repair 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&Fin repair 15mm bore dia Bib taps chromium plated with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .
S&F in repair Oval type Wash Hand Basin superior quality 550 x 400 mm size fitted and including waste coupling 150mm long complete all as specified and directed.
S&F in repair, Brass CP wash basin mixer(long nose)15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed all as specified and as directed.
Supply & Fix in repair vitreous china urinal, Half stall type, white (excluding flushing cistern) incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and as directed.
S&F in repair Sheet glass shelf assembly /corner shelf consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
S&Fin repair aluminium peg sets of 6 pegs complete
S&F in repair 450mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.
S&F in repair 600x450 mm bevelled edge of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.
S&F in repair Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.
Supply & Fix in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe ,with PVC cover sheet in same colour etc complete all as specified and directed.
S&F in repair PVC valveless, syphonic action type, flushing cistern, 10 lits capacity low level, white, with inlet, ball valve, float and handle including brackets, flush pipe and connection to pipes complete
S&F in repair C P Hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC, all as specified and directed.
S&F in repairs Two way bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.
S & F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
S & F in repair Soap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed.
S&F in repair rotational moulded polethylene water tank of 500 ltrs capacity ( cylindrical vertical with closed top) noticed and portion all as pacific SSR Part- I.
S&F in repair 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) complete all as specified and directed.
S&F in repair PVC (SWR) floor trap with CP grating including jointing to waste pipe 75 mm bore outlet with solvent cement all as specified.
S&F in repair 50mm PVC (SGW) pipes single socket in any length and including beands and socket complete all as specified and directed .
S&F PVC (SWR) bends 110 mm bore with or with out oval excess door complete all as specified and as directed
S&F in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete
S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed laid in trenches or in floors etc complete
S &F PVC (SWR) 75 mm dia vent cowl.
RCC NP3 150 mm diameter Pipes laid on150 mm thick PCC Cradle PCC 1:4:8 bed with excavation in depth 0.70m – 1.65 m in any type of soil, including one main manholes/drop manhole each 10 mtr interval of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.
S&f in repairs stainless steel pipes 50 mm dia of grade 202 medium as in Framed work such as sign boards /railing etc , all necessary welding ,drillngs or rivetting ,brackets ,stopers and including embedding the same in PCC 1:3:6 type C-1 below ground level, size of PCC (45x450x600mm) including excavation in soft/disintegrated rock complete all as specified and as directed. complete all as specified and directed.
S&F inrepair 28mm dia fancy type Stasinless steel dropery rod fixed with stoper, brackets etc to wall complete as sample approved all as specified and directed.
Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in soft / disintegrated rock complete all as specified and directed.
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.
Returning, filling in, earth including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.
Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.
Removing excavated material n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.
Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured)
M&L for treating top surface of filled earth at the rate of 5 litre per sqm of surface with anti termite chemical emulsion complete all as specified.
M&L for treating the soil under plinth protection at the rate of 5 litre per sqm of surface with anti termite chemical emulsion complete all as specified.
M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of anti termite chemical emulsion per Rm of the perimeter wall.
M & L for Plain Cement Concrete type D2, 1 : 4 : 8 (40 mm graded aggregate) as in foundation filling and mass concrete for embedding of posts etc complete all as specified and directed.
M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.
M&L RCC M-25 (Design Mix) as in chajjas complete all as specified and as directed.
M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc ruogh finished surfaces of concrete flat all as specified.
M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat all as specified.
M&L form work to chullah hoods, chajjas and similar items incl edges rough finished surfaces of concrete flat all as specified.
M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide
M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for fair finished surface of concrete
M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete
M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.
Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders
M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete.
M&l providing 75mm thick cement concrete 1:2:4, type B2 using 40mm graded stone agg as in floor finishished even and smooth complete all as specified and directed.
Supply only water proofing compound, complete all as specified and directed.
M&l for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A'.
Finishing surface to concrete roads, pavements, by brooming
M & L for Plain Cement Concrete type C2, 1 : 3 : 6 (40 mm graded aggregate) as in foundation filling and mass concrete for embedding of posts etc complete all as specified and directed.
M&L for Hardcore Broken stone or boulders of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick ,watered and rammed to a true surface
M&l for 75mm thick Cement concrete type E- 2, 1:5:10 (40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.
Providing cement concrete 25 mm thick type B-0 (1:2:4) using 12.5 mm graded agg as in sub base to flooring .
M&L for machine cut kota stone slab flooring 18-20 mm thick with white marble all arond 150mm wide over and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshed polishing in complete all as specified.
M&L for machine cut kota stone slab, 18-20 mm thick in riser and thired single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing complete all as specified and directed.
Material & Labour for precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 (20mm graded stone aggregate) exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .
M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed.
M&l for 5mm thick cement plaster in CM 1:4 with WPC on 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces of wall finished even and fair complete all as specified and directed. Note: WPC shall be measured separately.
M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed
M&L three coats of white wash on walls including preparation of new plastered surface and complete all as specified.
M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed.
M & L preparation of wall plaster or un plastered new surfaces and applying two coats of cement base paint over a coat of cement primer
M&L for chequered cement concrete coloured tiles 20 mm thick ,area exc 0.06 sqm but n.exc 0.16 sqm with grey cement and no pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 15mm thick screed bed in CM 1:6 completee all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finisheed even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction.
M & L, cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate as in surface channel or drain complete all as specified and directed.
S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel ventilators, top hung, with glazing bars with hinges and peg stay etc complete all as specified and directed.
S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed .
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.
M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed.
S&F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125 mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.
Supply & Fix 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F mild steel barrel tower bolt stove enameled black 200 mm size with bright bolt complete all as specified and directed.
S&F mild steel pressed handle oval type 150 mm size, stove enameled black complete all as specified and as directed .
Supply & Fix 300mm long Mild steel sliding door bolt , plate type stove enamelled black with bright bolt not less than 16mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed.
M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for 10 mm thick rendering on fair faces of concrete surfaces of roof as water proofing treatment in CM 1:4 with WPC, including finishing the surfaces even and smooth, complete all as specified and directed. Note: WPC shall be measured separately.
M & L for water proofing treatment to roofs surfaces including a coat of applied bituminous shalitex primer @ 0.30 lit per sqm evenly on roof surface and a coat of hot bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3 kg/sqm) unrolled and bonded completly to the substrate with side overlap of 75 mm and end overlap of 100 mm and then sealed/fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.2 kg/sqm shall be applied on top of APP modified polymeric membrane as per manufacturer instruction and finally it will be finished with a coat of aluminium paint @ 0.20 kg/sqm ,complete all as specified and as directed .
E&M Portion: Taking down carefully Copper/Aluminium point wiring (Light ,fan, socket or power) complete, removing unserviceable or serviceable materials from site and making good the disturbed surface of walls, floors etc, complete all as specified and directed.
M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for One light point/Fan point/bell point controlled by one, one way switch of 5/6 Amps complete all as specified and as directed.
Ditto all as per Item No 42 above but for one 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.
Ditto all as per Item No 42 above but for one 3/5 pin 5/6 amps socket outlet point on independent board controlled by one, one way switch of 5/6 amps on independent board.
Ditto all as per Item No 117 above but with 2.5 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.
S & F in repairs Switch piano, flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.
S&f in repair socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type, complete all as specified and directed.
S&f in repair socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), flush type, non shutters, non inter locking type, complete all as specified and directed.
S&F in repairs Switch piano flush type, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.
S&F in repairs ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.
S&f in repairs Electronic fan regulator flush type, 300 W Step type, 230 volts ISI marked. complete all as specified and directed.
S&f in repair decorative wall light fixture made up of brushed nikle finished with opal glass diffuser suitable for retrofit LED 9 W (Spiral B-22 Base) complete all as specified and directed.
S&f in repair light recess/surface mounting LED 2X2 luminaire 36 W, slim ceiling light with extruded aluminium housing and milky diffuser complete all as specified and directed.
S&f in repairLED Integrated Batten T5 box type surface mounted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.
Supply and fixing in repairs LED Integrated Batten T5 box type surface mounted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.
S&F in repairs 1x25 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.
M&L in repair for sub main wiring with 1100 volts grade PVC insulated and unsheathed cable with stranded copper conductor 2x6 Sqmm, of code Red for Phase, Black for Neutral & Green for Earth concealed in wall and drawn including 25mm PVC conduit along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.
Supply and laying in repair XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 25 Sqmm including laying, testing and commissioning complete all as specified and directed.
Excavation in trenches n. exc. 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of underground cable and getting out in hard/dense soil complete all as specified and directed.
M&L local dry sand filling in trenches around under ground cable complete all as specified and directed.
M&L in repair for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.
S & F in replacement GI pipe light grade 40 mm bore for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc complete all as specified & directed.
M&l for dismantling old earthing and providing new earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel all as shown in earth plate No 3 of MES schedule 2009 Part-I connected to earthing test point including earth continuity conductor and loop earthing etc as required 4mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thick in RCC 1:2:4 type B1 duly reinforced with 6mm dia bar @150c/c both ways including with lifting handle and earth lead and GI protection pipe light grade 15mm dia beyond 7.5 mtr from electrode to earth terminal point/main switch board and 20 mm bore GI watering pipe medium grade complete all as specified & directed.
S&f in replaceemnt of sheet metal enclosure with socket plug top and MCB with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as sspecified and directed.
S&F in repair MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 415 volts, double door type, suitable for housing MCB's and isolators, including grouting complete all as specified and directed.
S&F in repair MCB DB sheet metal enclosure for DB, SPN, 12 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.
Supply and Fix in repairs MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.
Supply and fix in repairs Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.
S&f in repairs MCB Triple pole & neutral 415 volts, 63 amps, of 10 KA complete all as specified and directed.
S&f in repair water heater storage type, electric capacity 25 litres BEE 5 star rated with grouting with four nuts and bolts complete with all acessories and chromium plated with two flexible number pipe for connection with hot/cold water supply complete all as specified and directed.
S & F Switch piano, flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.
S&F Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type, complete all as specified and directed.
S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.
Supply and fixing LED Integrated Batten T5 box type surface mounted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.
S&F 1x25 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.
S&F MCB DB sheet metal enclosure for DB, SPN, 4 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.
M&l for providing new earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel all as shown in earth plate No 3 of MES schedule 2009 Part-I connected to earthing test point including earth continuity conductor and loop earthing etc as required 4mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thick in RCC 1:2:4 type B1 duly reinforced with 6mm dia bar @150c/c both ways including with lifting handle and earth lead and GI protection pipe light grade 15mm dia beyond 7.5 mtr from electrode to earth terminal point/main switch board and 20 mm bore GI watering pipe medium grade complete all as specified & directed.
Supply and Fix MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.
Supply and Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.
Supply, laying, jointing and testing of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty, conforming to IS - 7098 Part I - 1988 with aluminum conductor 1100 Volts grade of cross sectional area 10 Sqmm , 2 core of in ducts or on walls laid in trenches encased in GI pipe fixed to walls / laid under roads / drains / paths / culverts etc complete all as specified and directed.
S & F GI pipe light grade 40 mm bore for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc complete all as specified & directed.
m/s vishnu kumar agarwal
shivam builders
LAXMI DATT & J C PANT
M/s Rana Enterprises
M/S GD Punetha Son
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .