Extension of HTLT line including construction of distribution Sub-Station for providing 3phase service connection to DTW scheme under Jal Jeevan Mission Har Ghar Jal in Tripura at different places under Dukli Old Agartala Bishalgarhand Jampuijala

Amount

(Supply & Erection)

Supply of 9 mtr long PCC Pole

Supply of MS Stay set complete

Supply of G.I Stay Wire 7/2.5mm

Supply of 11KV Stay/Guy insulator (porcelin)

Supply of fabricated MS Channel as per requirement of site condition and suitable for HT/LT over head line and as directed by the Engineer-In-charge made by (100X50X50X6mm) with double coat of red oxide primer coating

Supply of fabricated MS Channel as per requirement of site condition and suitable for HT/LT over head line and as directed by the Engineer-In-charge made by (75X40X40X6mm) with double coat of red oxide primer coating

Supply of fabricated MS angle as per requirement of site condition and suitable for HT/LT over head line and as directed by the Engineer-In-charge made by (65X65X6mm) with double coat of red oxide primer coating

Supply of 11KV Polymer composite 45KN disc insulator

Supply of 11KV Disc fittings for 6/1/2.59 mm ACSR conductor, 2 U bolt type

Supply of 11KV 320mm CD Polymer composite Pin insulator

Supply of LT Shackle insulator (3"X3.5")

Supply of Straps with nuts & bolts

Supply of 11KV Gang operated switch (Polymeric type)

Supply of 11KV Drop out switch (Porcelin)

Supply of 11KV Polymeric LA (9KV, 5KA)

Supply of 4mm dia G.I wire (8 SWG)

Supply of assorted MS Nuts & bolts (16mm & 12mm dia)

Supply of re-wirable porcelin cutout (100Amp)

Supply of re-wirable porcelin cutout (200Amp)

Supply of 70sqmm-10 bimetalic lugs

Supply of 95sqmm-10 bimetalic lugs

Supply of 35 sqmm Aluminium PVC cable

Supply of 70 sqmm Aluminium PVC cable

Supply of (karai) wooden Plank (2'X1'X1.5")

Supply of 1/2" dia polythin pipe

Supply of fabricated bracket clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primer coating

Supply of fabricated stay clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primer coating

Supply of XLPE Power cable 11KV Grade 3-Core, 70sqmm

Supply of 100 mm dia G.I Pipe, (Medium class)

Supply of Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 70sq.mm , 3-Core XLPE aluminium conductor cable of 11kv Graded.

Supply of 110mm dia HDPE Pipe, wall thickness: minimum 6.5mm, maximum- 7.3mm.

Erection of 9.0mtrs length of P.C.C POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with with soil upto the ground level, ramming and making complete in all respect.

Erection of 9mtrs length of Steel • Tubular POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required. and making complete in all respect.

Erection of M.S.Channel Cross-Arm 2.8 Mtr. Long 100 x50 x 50 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 0.8Mtr. Long 100 x50 x 50 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 0.3Mtr. Long 75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 1.2 Mtr. Long 75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 0.6 Mtr. Long 75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 2.2Mtr. Long 75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 2.8 Mtr. Long 75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Angle Cross-Arm 2.8Mtr. Long 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Angle Cross-Arm 2.5 Mtr. Long 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Angle Cross-Arm,1.6Mtr. Long 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of "C" type bracket for LT 5-wire of 65 x65 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of 11 KV Single Disc insulator set along with necessary fittings

Erection of 11 KV Pin insulator along with Pin.

Erection of shackle insulator of size 75mm x 90mm /100mm X 15mm with straps & bolts/ U-clamp on poles (Excluding the cost of straps / U- clamp, Nuts & bolts).

Installation / Positioning of 11/0.430KV,3-Phase 63KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification (Excluding the cost of back clamp,Nuts & Bolts)

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp,Nuts & Bolts)

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification.

Laying & Stringing of 1KM (Single Conductor) ACSR 6/1/2.59 mm dia 'WEASEL' including hoisting & binding etc. Complete as required.

Laying & strining of 1 KM (Single Conductor) , 10/8SWG GI wire including hoisting & binding etc. Complete as required.

Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing including supply of G.I.Pipe, Salt & Charcoal, GI wire, nuts &bolts, etc. as required)

Maintaining adequate clearance from overhead live conductors by Trimming of tree branches for Way Leaves

Supply of STIHL make battery operated pole pruner with following items: (a) Battery operated pole pruner model - HTA85, make - STIHL - 2Nos (b) Battery operated chain saw, model - MSA 200C, make - STIHL - 2 Nos © Lithium battery charger, model - AL 300-2 Nos, (d) Battery , model AP-300-4 Nos.

Providing Three Phase Service Connection with laying PVC cable from nearby Electrical pole to Premises upto 35mtr. in length supported by G.l.Wire,Reel Insulator i/c fitting fixing of Energy Meter as required .

Providing and executing cement concrete work 1:2:4 ( 1cement, 2river sand, 4 jhama bricks aggregate 20mm nominal Size) for grouting of steel pole/ supporting pillars excluding the cost of centering, shuttering inc. centering, shuttering and excavation in foundation trench not exceeding 1.4mtr width in 10sq.mm on plan i/c dressing of side and ramming of bottom lift up to1.5mtr. width i/c getting the excavated soil and direct with in alead of 50mtr (0.273 x 105 nos )

Carriage of materials such as Cable,AAC, AAAC, ACSR, G.I.Wire,Cross-Arm,Stay Set,Insulators etc., by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required, Upto the lead range 25KM

Carriage of 11/0.430, 3-Phase 63KVA by Mechanical Transport from the Site /Store/Worshop to working site Vis-a-vis including loading, unloading and placing on base, as required,, Beyond 25 KM upto the lead of 50KM

Carriage of 9.0mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required a) Beyond 25 KM upto the lead of 50KM

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required., Trench Size: Width-350mm, Hieght-1200mm / Sand (couhioning): Hieght-250mm, Width-350mm/ Protection: Double layer Bricks, Upto 120 sq. mm

Laying of one number additional PVC insulated and PVC sheathed I XLPE power cable of 11 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Trench Size: Width-200mm, Hieght-1200mm I Sand(couhioning): Hieght-250mm, Width-200mm/ Protection: Double layer Bricks Upto 120 sq. mm

Laying of different sizes HDPE pipe Isi marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part li complete with fitting and cutting, jointing etc. in the existing trench, complete as required

Laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (120 cm deepth)and re-filling etc as require

Laying of one number PVC insulated and PVC sheathed I XLPE power cable of 11 KV grade of all size in the GI Pipe/HOPE for riser including tieup of Pipe with pole by the help MS Flat Clamp (excluding cost of Clamp and Nut&Bolts) as required Up to 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as requiredUpto 120 sq. mm

Jointing of Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 70 sq.mm ,3 core XLPE aluminium conductor cable of 11kv Graded.

Manually digging /drilling horizontally or diagonali direction for road crossing I Water supply line/Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia GI pipe direct into the earth at a depth of minimum 11OOmm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering- ln -Charge

Providing of Pre-cast cement concretecable identification route marker (1 cement: 2 coarse sand 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1: 3( 1 cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits as per design, drawing and specification of TSECL. The marker shall be embossed "DANGERS: TSECL, ELECTRIC POWER CABLE" with Black colour letter(both side). The visible part shall be painted with Yellow colour japan paint. (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1 :3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.

SUDHANGSHU BHATTACHARJEE