GENERAL Restoration work of AMRUT Project road cutting on Eranjikkal Mokavoor Kunduparamba road Between chainage 2 500 to 3 000 General Civil Work

Amount

Appendix A

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

OD118470/2024-2025:Filling with granular material on trench as per drawing and technical specification.

OD68051/2024-2025:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grade on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a plate compactor to achieve the desired density, complete as per clause401. Grading-V- For sub base cum drainage layer - Mix in place method.

OD68052/2024-2025:providing laying spreading and compacting graded stone aggregate wet mix macadam specification including premix in the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site ,laying in uniform layers with in subbase base course on well prepared surface and compacting with plate compactor to achieve the desired density

5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.7.a:Providing bitumen leveling coarse between 40mm and 150mm with 36mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen with pressure sprayer at the rate of 20 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD68053/2024-2025:Mixed Seal Surfacing Manual means - Type A - Bitumen VG30 Providing , laying and rolling of close graded premix surfacing material of 20mm thickness composed of 11.2mm to 0.9mm (Type-A) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant laying and rolling with a three wheel 8-10KN static roller and finishing to required level and grades as per technical specification.

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.B:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications <br> PCC Grade M20 (Without formwork) <br>

ARJUN GOPAL P (BID ID -1967178)

ABDUL NASER K (BID ID -1968145)

ABDUL AZEEZ (BID ID -1968482)

Bidder Name

K.ANIL KUMAR

ABDUL AZEEZ

ABDUL NASER K

ARJUN GOPAL P