SPECIAL REPAIRS PERIMETER ROAD, CULVERT AND DRAIN AT OTM AREA OF TS(K) ALUVA

Amount

Surface dressing for the edge of road by cleaning all vegetation and waste material and making proper camber edge ground on soft/loose soil depth n exc 15cm complete all as specified and as directed.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

Applying evenly a priming/tack coat with paving bitumen primer at 5 Kg/ per 10 Sqm using paving bitumen Gde VG 10 with mechanical sprayer complete all as specified and as directed. (Note : Bitumen will be procured by the Contractor)

Bituminous premix semi dense asphaltic dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix,WITH PAVING BITUMEN VG 30 rolled and compacted to required camber and gradient complete all as specified and as directed. (Note : Bitumen will be procured by the Contractor)

Repair to pot holes nexc. 1sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to atleast 25mm in depth, making good by applying tack coat (VG-10) @ 5 Kg per 10 Sqm putting in premixed bituminous macadam, well rammed and sealed with paving bitumen Gde VG-30 binder 9.8 Kg per 10 Sqmm, blinded with0.09 cum of stone chipping 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot holes n exc. 30mm complete all as specified and as directed..

Repair to pot holes nexc. 1sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to atleast 25mm in depth, making good by filling in screened and graded road metal ,wateringand well ramming complete all as specified and as directed. (including supply of road metal )

Premix bituminous macadam using binder content as paving bitumen(VG-30 grade) at the rate of 4% by wt of total mix laid/rolled compacted to laid rolled and comapcted to required gradient and camber consolidated thickness 75 mm or less complete all as specified and as directed.(Note : Bitumen will be procured by the Contractor)

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. Note:- Rate quoted shall be deemed to be inclusive of disposal of debris outside MD Land.

M&L providing PCC solid blocks exc. 10cm in width type C1 1:3:6, 20mm graded aggregate and setting in cement mortar 1:6 complete all as specified and as directed.

M&L for Cement concrete Type B-0 (1:2:4) using 12.50mm graded stone aggregate as in drain surface, rounded or chamfered on edges or as in coping etc complete all as specified

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L Preparing newely plastered surfaces and applying three coat of white wash complete all as specified and directed.

M&L for cleaning of culverts of width upto 1.2m by mechanical means,using rod or compressor and removal of foreign material including soil rocks and wooden pieces and removing the existing blockage below ground level in cluding necessary cement work and making good condtion and maintaing slope including removal of plant growth all as specified and as directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint with retro reflectieve propertied of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model no. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Kuriako Mathai and company

KENZ CONSTRUCTIONS

LALA CONSTRUCTION

M/s S & S Enterprises/ Suresh Shivasankarapillai

VIJAY CONSTRUCTIONS

M/S AARJAY ASSOCIATES