PERIODICAL MAINTENANCE AND REPAIRS REPLACEMENT OF UNSERVICEABLE SPARES OF EOT HOT CRANES AT VARIOUS HANGARS INS KALINGA MAGZINES AND NAD BHEEMUNIPATNAM

Amount

Periodical Examination, normal and routine maintenance as per manufacturers instructions,repairs and renewals of spares of EOT cranes of any make and model as available on site for Capacity up to 1.5 Ton – 04 Nos complete all as specified and directed by Eng-in-charge. Notes : - (i) Supply only spares shall be measured and paid for separately under relevent items of this Schedule A. The unit rate quoted shall deemed to include the cost of labour for fixing the spares. (ii) Any minor repairs( discretion of GE is final and binding) required other than specified in the schedule is deemed to be included in the quoted rate.

All as per Item No.1 above but Capacity 2 to 3Ton – 10 Nos

All as per Item No.1 above but Capacity 5Ton – 02 Nos

All as per Item No.1 above but Capacity 8Ton – 02 Nos

All as per Item No.1 above but Capacity 10Ton – 11 Nos

All as per Item No.1 above but Capacity 30Ton – 01 No.

Periodical Examination, normal and routine maintenance,as per manufacturers instructions,repairs and renewals of spares of HOT cranes of any make and model as available on site for Capacity 1.50Ton – 16 Nos,complete all as specified and directed by Eng-in-charge. Notes : - (i) Supply only spares shall be measured and paid for separately under relevent items of this Schedule A. The unit rate quoted shall deemed to include the cost of labour for fixing the spares. (ii) Any minor repairs required other than specified in the schedule is deemed to be included in the quoted rate. (iii) Unit rate quoted shall deemed to include one crane mechanic and helper for attending complaints normal routine maintenance and minor repairs whenever breakdown occurs. (iv) The crane mechanic have well qualified in respective trade and nave knowledge in preventive measures (first aid) in case of electrical accidents.He shall wear approved uniform as directed by Eng-in-charge.

All as per Item No.7 above but Capacity 2Ton – 05 Nos

All as per Item No.7 above but Capacity 5Ton – 02 Nos Notes for Item Nos 1 to 9 : (i) Unit rate quoted shall deemed to includes man power as required at site for crane mechanics and helpers for attending complaints normal routine maintenance including minor repairs whenever breakdown occurs as directe by Eng-in-charge. (ii) The crane mechanics have well qualified in respective trade and have knowledge in preventive measures (first aid) in case of electrical accidents.He shall wear approved uniform as directed by Eng-in-charge.

Carry out load test on (Deflection) EOT Crane under 100% of full load capacity of crane on hoisting, long & cross travel, micro checking in performance including loading, unloading, transportation, handling the test load for EOT crane capacity up to 1.50 Ton (Mobile Crane, Truck & Trailer shall be arranged by contractor) complete all as specified and directed by Eng-in-charge. Notes:- (i) The required load is to be arranged by the contractor under his own arrangements including transporting to and from the site without any extra cost to the department. (ii) Crane testing is to be carried out by the authorised inspector as per factories act.

All as per Item No.10 above but Capacity 2 to 3Ton

All as per Item No.10 above but Capacity 5Ton

All as per Item No.10 above but Capacity 8Ton

All as per Item No.10 above but Capacity 10Ton

All as per Item No.10 above but Capacity 30Ton

Carryout load test on (Deflection) HOT Crane under 100% of full load capacity of Crane on Hoisting, Cross Travel and long travel checking in performance including loading, unloading, Transportation, handling the test load obtained from concerned unit for HOT Crane capacity up to 1.50 Ton HOT Crane (Mobile Crane, Truck & Trailer arranged by contractor) complete all as specified and directed by Eng-in-charge. Note:- (i) The required load is to be arranged by the contractor under his own arrangements including transporting to and from the site without any extra cost to the department. (ii) Crane testing is to be carried out by the authorised inspector as per factories act.

All as per Item No.16 above but Capacity 2Ton

All as per Item No.16 above but Capacity 5Ton

Disconnecting and taking down electromagnetic thruster / Hydraulic Brake unit from the crane, shifting to work shop, dismantling all parts, replacement of unserviceable parts like bearings, Brake coil, thruster oil, assembling, shifting to existing location and fixing in a same position, complete testing the system all as per manufacturers instructions, and as directed by Engineer-in charge.

Supply only relay PCB board high capacity flux protection NO contact form rated coil voltage 110 Volts AC to 12 volts AC supply single pole 10 Amps suitable up to 10 Ton crane complete all as directed by Engineer-in charge.

M&L for for rewinding of electromagnetic brake super enamelled copper of existing gauge and No of turns, with proper insulation, varnishing, baling and testing on completion all as directed by Engineer-in charge.

Supply only power contractor capacity up to 32 AMPS with 2NO and 2 NC for EOT Cranes of 5 T to 10 T capacity complete all as specified and directed by Engineer-in charge. Make : Siemens / L&T

Supply only Long liver type 2 way limit switches suitable for CT & LT operation fo EOT Cranes of 5 T to 10 T capacity complete all as specified and directed by Engineer-in charge. Make : SOC

Supply only crane chain hoist 10 way push button switch pedent lift control FRP aluminium push button terminal box IP 65 protection suitable for 5 T to 10 capacity crane complete all as specified and directed by Engineer-in charge. Make : Schneider/simens

Supply only PVC flexible copper cable size 3 core 2.5sq mm, 2mm dia steel wires, insulation class 2/3 operational voltage 300 V/500 V, operating Temp 5 degree C to 70 degree C flame resistance including cable gland, terminations & testing etc.complete all as specified and directed by Engineer-in charge. Make : Polycab/Havells/Finolex

Supply only PVC flexible copper cable size 4 core 1.5 sq mm , 2mm dia steel wires, insulation class 2/3 operational voltage 300 V/500 V, operating Temp 5 degree C to 70 degree C flame resistance including cable gland, terminations & testing etc, complete all as specified and directed by Engineer-in charge. Make : Polycab /Havells /Finolex

Supply only Gear oil Servo 120 Kinematic Viscosity cst @ 40 degree C, 220- 250 Flash point (COC) 250 complete all as specified and directed by Engineer-in charge. Make :- Servo/Castrol

Supply and toping up of Silicon Transformer oil dilectric strength, Viscoty 50 cst (centi stores) complete all as specified and directed by Engineer-in charge. Make :- Power oil

Supply and Fix Chain Pulley Block Capacity 1 Ton complete all as specified and directed by Engineer-in charge. Make : Indef

Supply only Steel wire rope 10mm dia complete all as specified and directed by Engineer-in charge. Make : Usha Martin

Supply only wheel bearing LT & CT up to 10 Ton capacity EOT and HOT Cranes complete all as specified and directed by Engineer-in charge.

Supply only crane chain hoist 15 way push button switch pedent lift control FRP aluminium push button terminal box IP 65 protection suitable for 5 T to 10 T capacity crane complete all as specified and directed by Engineer-in charge. Make : Schneider/simens

Supply only VVVFD (Variable Voltage Variable Frequency Drive) with DBR slip resistance and required electrical cables, lugs, ferrule numbers etc, model A1000 or V1000,capacity up to 3Ton EOT Crane for Main Hoist application including taking down unserviceable VVVFD complete all as specified and directed by Engineer-in charge. Make : Yaskawa L &T Model - A1000 or V1000 /Siemens

Supply only PVC flexible copper Cable size 19 Core , 1.5 sq mm 2mm dia steel wires, insulation class 2/3 operational voltage 300 V/500 V, operating Temp 5 0C to 70 o C, Flame resistance including cable Gland, Terminations & Testing etc.complete all as specified and directed by Engineer-in charge. Make :- Polycab/Havells/Finolex

Supply only C track system for track support made of CRCA sheet of thickness 2.5 mm complete all as specified and directed by Engineer-in charge.

Supply only LT wheel up to 10 Ton capacity EOT and HOT Cranes complete all as specified and directed by Engineer-in charge.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in charge.

SERVO-TECH ENTERPRISES