Renovation cum decoration by interior work of health department (upper cabinate and partition for PHM) under Kamarhati Municipality

d) Anti-termite treatment to the junction of wood work and masonry walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying at the points of contact with the adjoining masonry by drilling 6m. dia holes at a downward angle of about 45 degree at the junction of woodwork and masonry and squirting chemical emulsion into these holes at the rate of half litre per hole. The entire work is to be carried out as per specification of Code I.S.-6313 (Part-III)-1981. The shutters are to be sprayed with emulsion. on both sides. All wooden fixtures like almirahs, racks etc. are also to be throughly sprayed with chemical emulsion. (Payment will be made on the basis of outside measurements of doors and windows) 2*7.5*8.0

Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN -1154, of approved quality of reputed brand as per direction of Engineer-in-Charge fitted and fixed complete including all incidental charges.

Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] (iv) 12mm For Almirah, Upper Cabinate & upper table partition 4*5.4+2*9*2*0.6*0.3+4*6.0+2*2*10*0.6*0.3+5.4*2+2*9*2*0.6*0.3+1.9*2+1.5*2+5*4*1.5*0.6 (vi) 19mm Cabin Partition & Structure

Partition with soft insulation board (of 12mm thick) as per design fitted and fixed complete (excluding the supporting framework but including necessary teak wood battens of size 40 mm & 25 mm). Batten for Support (a) Ordinary Teak

Providing and fixing 12 mm thick clear glass shelf with edges round off, supported on SS-304 brackets complete fixed with 40 mm long SS screws, rawl plugs etc., as per direction of Engineer-in-charge (Glass area shall be measured for payment).

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. Glossy/Matt/Suede excluding surface texture or metallic lustre.

Supplying, fitting & fixing of drawer channels made of Stainless Steel (grade-304) in all respect as per approval and direction of Engineer-in- Charge.

Supplying, fitting & fixing of Godrej drawer lock lock with 3 nos keys in all respect as per approval and direction of Engineer-in- Charge.

Supplying PVC rollers for sliding windows as per direction of Engineer in charge.

"FULL HEIGHT GLAZED DOOR Full ht.solid 35mmthk flush door of size as specified fully finished with 12mm thick glass with 1mm laminate with approved shade, provide door with door closer, edge lipping lock and SS handle all complete including 4” x 3” wooden door frame. (Parly as sliding as per direction)"

Transcription top shall be provided with 12mm thick toughened glass (partly glazed partly frosted) fixed horizontally with concealed stainless steel D bracket. Both exposed edges (inside and outside) glass shall be moulded and finished in mirror polish.

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.

Iron parliamentary hinges conforming to IS 362-1982 fitted and fixed complete with steel screws.

(b) Supplying 'Godrej' mortice lock chromium plated with

keys 6 levers including fitting & fixing complete.

ii) Godrej Hydraulic door closer fitted and fixed complete.

(a) Heavy type

(i) Door stopper.(Brass)

L.W. Cess @ 1%

Please Enable Macros to View BoQ information