REPAIR TO CERTAIN STEEL FURNITURE AT ARMY AREA JODHPUR UNDER GE ARMY NO 1 JODHPUR

Amount

Repair of under mentioned furniture items will be carried out as follows:- (a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. Denting work to be done as per standred workmanship before painting as directed by GE/EIC. (b) Work will be executed where the furniture exist in different User Units/Md accns at Jodhpur/Shikargarh Army Area including BSO's Furniture Yard as directed by Engineer-in-Charge.

Almirah Large Steel FD-67 / 1031)

a) Steel 6 lever locks, as per drg

b) CP Handle as per drg

c) Legs as per drg

d) Repairs to door as specified including replacement of hinges

e) Repair/adjustment to existing shelf including welding as per drg

f) Shutter/door as per drg.

g) Shelf as per drg

h) Locking arrangement complete including MS bar.

j) Welding wherever required as directed by GE/EIC

Almirah Medium / Small Steel (FD-1032/FD-104(m))

a) Steel 6 lever locks , as per drg

b) CP Handle as per drg

c) Legs as per drg

d) Repairs to door as specified including replacement of hinges

e) Repair/adjustment to existing shelf including welding as per drg

f) Shutter/door as per drg.

g) Shelf as per drg

h) Locking arrangement complete including MS bar.

j) Welding wherever required as directed by E-in-Incharge

Table 3x2 with and w/o drawer & Table 3'x3' (FD-1008/1007/1009)

a) Welding wherever required as directed by E-in-Incharge

b) Top 18 mm thick of size 3'x2' made of MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

c) Top 18 mm thick of size 3'x3' made of MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

d) Repairs to Drawer by replacing old u/s parts with new parts and providing roller bearing including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg.

e) Rubber shoe std quality as per drg

f) Lock of drawer as per drg

g) MS section any member as per drawing.

Locker Steel (FD-1029/257/SKD-562)

(a) CP handels as per drg

(b) S/S Hasp & Staple , rest as per drg

(c) Repairs to door including replacement of hinges

d) Shutter/door as per drg.

(e) Legs as per drg

(f) CP Conduit pipe as per drg

g) Shelf as per drg.

h) Steel 6 lever locks as per drg.

j) Locking arrangement complete including MS bar.

k) Welding wherever required as directed by E-in-Incharge

Form with/without back (FD-78/FD-97/1027)

Seat made of 18 mm thick BWP grade plywood, duly pasted with 0.8 mm thick sunmica on top side with suitable adhesive by GE/EIC, 6 mm thick half round teak wood beading shall be used all around the edges with headless SS Nails and fevicol/ adhesive, SS Nut & Bolts shall be used for fixing the top as directed by GE/EIC.

Back made of 18 mm thick BWP grade plywood duly pasted with 0.8 mm thick sunmica , on top side with suitable adhesive by GE/EIC, 6 mm thick half round teak wood beading shall be used all around the edges with headless SS Nails and fevicol/ adhesive, SS Nut & Bolts shall be used for fixing theback as directed by GE/EIC.

c) Welding wherever required as directed by E-in-Incharge

Rack Six Tiers steel (FD-1038)

a) S&F Back of Racks as per drg

b) S&F side of Rack as per Drg

c) S&F of Shelves as per Drg

c) Welding wherever required as directed by E-in-Incharge

Book Case Steel all types (FD-359/1028/90(M)/69(M))

a) Steel 6 lever locks, as per drg

b) CP Handle as per drg

c) Glass of shutter including fixing as per drg

d) Repair/adjustment to existing shelf as per drg

e) Shutter as per drg.

f) Shelf as per drg

a) Welding wherever required as directed by E-in-Incharge

Table Office Clerk Steel : (FD-84 / 381 FD-1004)

a) Legs, as per drg

b) Lock of drawer as per drg

c) Repairs to Draweras specified & as directed by Engr-in-Chg.

d) MS conduite any as per drg

e) PVC Shoes std quality all as per drg

f) Welding the joints of legs / square tube as per drg

g) Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging ofshall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Table Office Officer Steel (FD-84/1003)

a) Legs, as per drg

b) Lock of drawer as per drg

c) Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg.

d) MS Steel members any as per drg

e) PVC Shoes std quality all as per drg

f) Welding the joints of legs / square tube as per drg

g) Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Table Dinning OR A/top (FD- 165)

a)Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly fixed with 1mm stainless steel to be fixed as table top diamention of what shown in drg and all as specified and directed by EIC/GE.

b) Leg/Stiffner/short rail of complete all as specified and directed.

c) Long Rail/middle support complete all as specified and shown on drg and as directed.

Table Centre Glass Top (FD-375)

(a) Table top glass colour and shade as per directed by GE/EIC as per drg

(b)Polishing ,welding and vacume all as per directed by GE/EIC

(c) Best quality Shoe of 32 mm dia as per sample held in BSO Yard

Chair School with hard board (FD/E6/MAP/05)

(a) One piece seat and back, as per drg.

Hand board of chair made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive on one side and balancing white sunmica on other side all as directed by GE/EIC.

(c) Base frame for fixing hand board.

(d) Welding work wherever required as directed by EIC.

Table Bed Side (MAP) (FD/E6/MAP/15(R) )

a) Back of 6 mm thick ply BWP grade plywood shall be used as per shape and size shown in drg.

b) Top made out of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of shade approved including alround the edges by EIC/GE with suitable adhesive on one side and balancing white sunmica on other side all as directed by GE/EIC.

c) Sides made out of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive on one side and balancing white sunmica on other side all as directed by GE/EIC.

d) Drawer Large made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel and CP Handle 4",be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers.

e) Drawer Small made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel and CP Handle 4" be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers.

(d) Welding work wherever required as directed by EIC.

e) PVC shoe as per sample.

Teapoy Verandah (O) (FD/E6/MAP/17)

a) Top made out of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive on one side and balancing white sunmica on other side all as directed by GE/EIC.

b) MS pipe any as per drg

c) MS Bar Mesh as per drg

d) Welding work wherever required as directed by EIC.

M&L for painting two coat of Synthetic enamel paint or hammer Tone paint with shade as approved by EIC/GE over & including M&L single coat of primer through spray machine , both internally & externally to the following furniture articles, viz F/FD/DB/MAP/TP series or similar items including removing of dust, dirts,dents etc and existing paint both internally & externally by applying paint remover/scrapping without damaging to surface , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge.

a) Almirah Steel Medium/Small

b) Almirah Steel Large

c) Locker Steel

d) Teapoy Varandah

e) Table 3x2 with and w/o drawer & 3'x3'

f) Rack steel any type

g) Rack Shoe steel

h) Trestle store room

j) Form with/witout Back

k) Chair School with Hand board

l) Rack Map Steel

m) Dining Table OR AT

n) Table Bed Side (MAP)

Shri Maruti Trading Co.

SNEH CORPORATION

SK INDUSTRIES