Building Work

Name of Work :- Providing Designated Parking facility and signages for person with Disability at ITI Bilimora, Ta. Gandevi

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and fixing coloured self adhesive PU-Tactile tile, ground surface

indicators of Polyurethane) of size 300mm x 300mm for guiding/warning

1 to the visually visitors in the centre/side of the pedestrian/approach 364.50 Sqm 5452.49

pathway as per specification and guidelines complete in all respect to the

entire satisfaction of in charge.

Providing and fixing acrylic multilingual Braille (raised dots) DIRECTIONAL

SIGNBOARDS of size 225 x 150mm designed as per accessibility standards

and having 3.5mm thick acrylic base plate with Upper Case San Serif words

made of white acrylic non glare cut out letters of height 15mm raised not

less than 0.8mm above base plate and the equivalent word written in Hindi

with Devanagari non glare acrylic letters of height 15mm raised not less

than 0.8mm above base plate and having a non-glare acrylic cut arrow

pointing in the required direction. Each signboard to be fixed as per

manufacturers specifications on the wall at the approved location and at a

height of 1200mm from FFL complete as per design / specifications and

guidelines as per the entire satisfaction of the Engineer-in-charge

P& F Braile Indicator Of Size 200 Mm X 50mm For Handrails Of The

Approved Design And Make Have Braile Dots Raised 0.5 Mm Above Base

Plate To Be Installed At Specific Locations As Per Direction Of Engineer In

Providing and fixing of conspicuity tape 50mm width on of treads in

4 staircase including cutting pasting etc. As per harmonised guidelines 549.00 Rmt 308.56

complete in all respect to the entire satisfaction of engineer in charge.

Providing, Supplying and Fixing Handicap Parking Sign, 1 Pack

Handicapped Parking with Picture of Wheelchair, 18"x 12" Heavy Duty

Aluminum Metal, Honeycomb-like Surface, Engineer Grade Reflective, Rust

Free, Waterproof standard quality as directed by engineer in charge

including all materials and labours etc complete. explain above item

Providing and fixing Horizontal and Vertical Grab Bar of Stainless Steel

Grade SS 304, minimum 32–38 mm outside diameter, 600 mm long (or as

approved) and Folding (Flip-up) Grab Bar of Stainless Steel Grade SS

minimum 32–38 mm outside diameter and 750 mm long (or as approved)

with satin/matt finish, complete with concealed stainless steel wall flanges,

6 heavy-duty fixing arrangement, stainless steel screws, nylon plugs and all 10.00 No 4284.42

necessary accessories, securely fixed to the wall adjacent to the water

closet at the required height as per approved drawings and accessibility

guidelines, including all labour, materials, tools, testing and making good

the disturbed surface, complete.

Excavation for foundation upto 1.5 m depth including sorting out and

7 stacking of useful materials and disposing off the excavated stuff upto 50 10.00 Cum 120.01

Meter lead.(A) Loose or soft soil

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6-

8 machine cut stone aggregates 40 mm nominal size) and curing complete 2.70 Cum 3080.90

excluding cost of formwork in (A) Foundation and Plinth

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing

9 complete excluding cost of formwork and reinforcement for reinforced 7.00 Cum 3989.04

concrete work in (A) Foundations, footings, Base or columns and Mass

Name of Work :- Providing Designated Parking facility and signages for person with Disability at ITI Bilimora, Ta. Gandevi

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of read lead paint &

two coat oil paint. (A)In beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common rafters and the like..

Providing and fixing of Ridge flashing for roof panel shall be made out of

0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of minimum

240 mpa steel grade confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy

primer on both side of the sheet and polyester top coat 15-18 micron. The

PPGI Sheet shall have plastic protective guard film of minimum 25 microns

to avoid scratches during transportation. The ridge shall be fixed to the

steel members by pop rivet or self drilling/self stitching fastners @

maximum 450 mm c/c along length of capping/flashing etc complete .

I \ We am \ are willing to carry out the work at ……………………… % above\bellow percent (Should be written in figures and words) of the estimated

rate mentioned above. Amount of My\Our tender works put as under.

Estimate Amount Estimate Amount

Put to tender Rs___________ Put to tender Rs___________

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate i.e. 6176/- per mt. mentioned in all the tender.

Dated Signature of Deputy Executive Engineer Executive Engineer

the Contractor. Navsari (R & B) Sub Division Navsari (R & B) Division

Navsari Navsari