REPAIR OF BOUNDARY WALL, FENCING, GATE AREA, DRAINAGE AT WEST SIDE OF LEHL MARG UNDER GE (S) BINNAGURI

Amount

Schedule 'A'

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of brick masonary work, built in cement mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. and deposited where directed complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n exc 15cm thick (below or above ground level) and removing of rubbish to a distance n exc 50m complete all as specified and directed.

Dismantling of brick work ( Laid in Flat or Edges), or brick tiles in floors,channels or Kerbs built in cement mortar or cement lime mortar ,approns etc. beded and pointed in any layer(each layer) in any morter complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and as directed.

Dismantling of chain link fencing work of any description not otherwise provided for Complete all as specified and as directed.

Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc. Complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removal excess soil to at a distance 50 m and making good surface(soft or loose soil) Complete all as specified and as directed.

Surface dressing not exceeding 15 cm deep in soft/ loose soil Complete all as specified and as directed.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed .

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed.

Removing excavated material exc 250M n.exc 500M and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flate iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes framedguard bars barred iron doors/gate, ladders framed balusters walkways railings framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M & L for providing reinforced cement concrete type B1,1:1.5:3 (Using 20 mm graded stone aggregate) in Precast posts, fencing posts, straining or terminal posts, struts etc, for fencing average sectional area exceeding 100 Sq. Cm an and n.exc 250 Sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and as directed. NOTE:- Reinforcements shall measured and paid separately

Supply only Chain link MS galvanised fencing of mesh size 75x75 mm, weight exc. 2.5 Kg per square metre complete all as specified and as directed. Note:- Weight of chain link fencing shall be ascertain by BOO

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wire any size or type weight exc 4 Kg per square metre complete all as specified and as directed.

S&F in repair galvanised 2 strand steel barbed wire 2.254 mm dia barbed with 2 mm barbed at 75 mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or lying at corssling with and provision of galvanised mild steel wire staples or steel pins etc all as specified and as directed (Note : Each line of wire to be measured)

S & F10mm dia & over mild steel round or square bars fixed behind chain link fencing as guard bars etc and similar articles complete all as specified and as directed.

S & F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and direted .

M&L for preparation of newly or previously untreated surfaces of new steel surfaces of any description, over 10cm width or girth and applying Two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed

M&L for preparation of newly or previously untreated surfaces of new steel surfaces of any description, n.exc. 10cm width or girth and applying Two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed

M & L PCC (1:2:4) type B0 (12.5mm graded aggregate) as in roof kerbs, coping, slightly rounded or chamfered on edges, finished even and smooth on exposed concrete surface without using extra cement all complete as specified and as directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and footpath finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.

M&L for PCC 1:3:6 Type C2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:4:8 Type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer completed all as specified and directed.

M&L for providing RCC 1:2:4 type B-1( using 20mm graded stone aggregate) slab supported on walls, beam and column in floor, roof, landing, balconies, canopies, deck slab aand in shelves and the like inclluding necessary formwork complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge not exceeding 63mm thick, deposited , spresd and levelled in layer ot exceeding 15cm thick, watered and rammed to a true surfaces completed all as specified and directed .

M&L for machine pressed ,pre-polished and chemically treated, smooth finished ,exterior graded coloured cement concrete Chequered tiles 30cm x 30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigments in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L for 60mm thick M-35 grade factory made vibratory compected cement concrete rubber moulded, interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick consolidated sand cushion and joints filled with sand including demolition of old paver block complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate ) as in surface channels and drains etc complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L Brick work with Locally available best quality bricks , laid on edges on top surfaces of drains,bedded and jointed in CM (1:6) and Pointed in CM (1:3) complete all as specified and as directed.

M&L Brick work with Locally available best quality bricks , laid flat on verticle inclined sides of drains,bedded and jointed in CM (1:6) and Pointed in CM (1:3) complete all as specified and as directed.

Formwork flat fair finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work vertical or to batter complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and fair without using extra cement complete all as specified and as directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.complete all as specified and directed.

Mild steel TMT bars 6mm to 8mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

M&L for preparation new painted surfaces on wall and applying one coat of weather proof Acrylic exterior emulsion paint of approved make and shade complete as specified and as directed.

M & L for preparattion of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and diredted.

M&L for providing RCC 1:2:4 type B-1( using 20mm graded stone aggregate) in landing, cover slabs (for manholes) chullah hoods, chajjas, water troughs, mangers, shelves and similar article with plain faces set in cement morter 1:4, inclluding necessary formwork complete all as specified and directed.

M/S VIRENDRA KUMAR SINGH

SG ENTERPRISE

BINOD TRADING CO.

PULAK SAHA

M/S MOHAN KUMAR BANSAL

M/s. MD IRSHAD

samrat saw mill and joinery workshop

S.N. GHOSH AND CO.

R K AGARWAL